YIG ($Y_3$$Fe_5$O_{12}$)의 미세구조 및 자성 특성에 대한 $SrTiO_3$첨가 영향

The Effects of $SrTiO_3$ Addition on the Microstructure and Magnetic Properties of YIG

  • 장학진 (부산대학교 공과대학 무기재료공학과) ;
  • 윤석영 (부산대학교 공과대학 무기재료공학과) ;
  • 김태옥 (부산대학교 공과대학 무기재료공학과)
  • Jang, Hak-Jin (Dept. of Inorganic Materials Engineering of Pusan National University) ;
  • Yun, Seok-Young (Dept. of Inorganic Materials Engineering of Pusan National University) ;
  • Kim, Tae-Ok (Dept. of Inorganic Materials Engineering of Pusan National University)
  • 발행 : 2001.03.01

초록

SrTiO$_3$첨가량 및 소결온도에 따른 YIG 소결체의 미세구조 및 자기적 특성변화에 대하여 조사하였다. 소량의 SrTiO$_3$소결재를 첨가한 결과 소결체의 격자상수는 약간 증가하였으며, 이는 소결시 $Y^{+3}$, Fe$^{+3}$이온이 이온반경이 상대적으로 큰 Sr$^{+2}$, Ti$^{+4}$이온으로 치환되었기 때문인 것으로 추정된다. SrTiO$_3$소결재를 0.2mo1% 첨가하고, 142$0^{\circ}C$에서 소결한 소결체의 밀도는 이론밀도의 98%이상의 치밀화를 얻을 수 있었다. 상온에서의 포화자화값(M$_s$)은 SrTiO$_3$소결재의 첨가량이 증가함에 따라 약간 감소하였으나 큰 변화는 없었다. 더욱이 온도에 따른 보자력 (H$_c$)의 변화는 없었다.

The effects of SrTiO$_3$ addition and sintering temperature on the microstructure and magnetic properties of yttrium iron garnet (YIG) were investigated. The lattice Parameter increasing of sintered YlG with small amount of SrTiO$_3$ addition was supposed to be substituted $Y^{+3}$, Fe$^{+3}$ ions to Sr$^{+2}$,Ti$^{+4}$ ions which are relatively large in ionic ranius. A YIG specimen sintered at 142$0^{\circ}C$ with 0.2mol% SrTiO$_3$ showed above 98% densification of theoretical density. Saturation magnetization (M$_s$) at room temperature decreased a little bit with increasing SrTiO$_3$, addition but no great chance. In addition, the coercivity (H$_c$) was almost not changed by sintering temperature.

키워드

참고문헌

  1. R.H. Knerr, IEEE Trans. Microwave Theory Tech. Mtt-23, 818 (1975)
  2. D.D. Urus and I.D. Bursuc, IEEE Trans. Magn., MAG-21, 1201 (1985) https://doi.org/10.1109/TMAG.1985.1063677
  3. R.L. White, J. Appl. Phys., 40, 1061 (1969) https://doi.org/10.1063/1.1657530
  4. J. Nicolas, 'Microwave Ferrites', chapter 4 of Ferromagnetic Materials, vol. 2, edited by E.P. Wohlfarth, (North-Holland Publishers, New York) 257-280 (1986)
  5. M. Gomi, T. Okazaki, and M. Abe, IEEE Trans. Magn., MAG-23, 2967 (1987) https://doi.org/10.1109/TMAG.1987.1065444
  6. K. Matsumoto, K. Yamaguchi, A. Ueno, and T. Fujii, J. Magn. Soc. Jpn., 14, 247 (1990)
  7. P. Hansen and J.P. Krumme, Thin Solid Film, 114, 69 (1984) https://doi.org/10.1016/0040-6090(84)90337-7
  8. M. Gomi, T. Tanida, and M. A be, J. Appl. Phys., 57, 3888 (1985) https://doi.org/10.1063/1.334905
  9. G. Menzer : Die Kristallstruktur der Granate, Centralbl. Min [A] 344, (1925)
  10. M.A. Gilleo and S. Geller, Phys. Rev. 110, 73 (1958) https://doi.org/10.1103/PhysRev.110.73
  11. W.R. Holmquiat, C.F. Kooi, R.W. Moss, 'Reaction kinetics of polycrystalline yttium iron garnet', J. Am. Ceram. Soc., 44, 194 (1961) https://doi.org/10.1111/j.1151-2916.1961.tb13743.x
  12. Y.Y. Song et al., 'The effect of $Bi_2O_3$additon on the microstructure and magnetic properties of YIG', J. Magn. Magn. Mater, 177-181, 257-258 (1998) https://doi.org/10.1016/S0304-8853(97)00863-9
  13. R.J. Yang, T.B.Wu, I.N.Lin, 'Densification and microstructure developement in the reaction sintering process of yttium iron garnet', J. Mater. Sci., 25, 3566-3572 (1990) https://doi.org/10.1007/BF00575390
  14. Dr. Gerhard Winkler, 'Vieweg Tracts in pure and applied physics', volume 5. magnetic garnet. Friedr Vieweg & Sohn Braunschweig/Wiesbaden, 34, 48 (1981)
  15. Cullity, 자성재료학, 반도출판사, 508-510 (1996)