Development of Straightness Measurement System thor Flat Workpieces

평면 공작물 진직도 측정 시스템 개발에 관한 연구

  • Kim, Hyeon-Su (Graduate School of Kumoh National Institute of Technology) ;
  • Jang, Mun-Ju (Graduate School of Kumoh National Institute of Technology) ;
  • Hong, Seong-Uk (Dept.of Machanical Engineering, Kumoh National Institute of Technology) ;
  • Park, Cheon-Hong (Korea Institute of Machinery and Materials)
  • Published : 2002.03.01

Abstract

This paper presents a straightness measurement system for flat and long workpieces. The measurement system consists of a laser, a CCD camera and processing system, a carrier system with a stylus, and some optical units. The carrier system accompanies the stylus, which displaces and retroreflector along the surface profile. The optical unit is used to optically amplify displacement of the stylus unit. The developed system is applied to a ground surface and a LM guide unit. The experimental results show that the developed system can measure the straightness of flat surface and moving systems.

Keywords

References

  1. Fan, K.C., Zhao, Y., 'A laser straightness Fan, measurement system using optical fiber and modulation techniques,' Int. J. of Mach. Tools & Manufac., Vol. 40, pp. 2073-2081, 2000 https://doi.org/10.1016/S0890-6955(00)00040-7
  2. Huang, J., 'An exact minimum zone solution for three-dimensional straightness evaluation problems,' Precision Engineering, Vol. 23, pp. 204-208, 1999 https://doi.org/10.1016/S0141-6359(99)00012-4
  3. Chou, C., Chou, L.Y., Peng, C.K., Huang, Y.C. and Fan, K.C., 'CCD-based CMM geometrical error measurement using fourier phase shift algorithm,' Int. J. of Mach. Tools & Maunfact., Vol. 37, No. 5, pp. 579-590, 1997 https://doi.org/10.1016/S0890-6955(96)00078-8
  4. Zhang, Q., Fan, K.C., Li, Z., 'Evaluation method for spatial straightness errors based on minimum zone condition,' Precision Engineering, Vol. 23, pp. 264-272, 1999 https://doi.org/10.1016/S0141-6359(99)00020-3
  5. Samuel, G.L., Shunmugam, M.S., 'Evaluation of straightness and flatness error using computational geometric techniques,' Computer Aided Design, Vol. 31, pp. 829-843, 1999 https://doi.org/10.1016/S0010-4485(99)00071-8
  6. 박천홍, 정재훈, 김수태, 이후상, '서브미크론 진직도 측정장치 개발,' 한국정밀공학회지, 제17권 제5호, pp. 124-130, 2000