Composites Research

The Korean Society for Composite Materials (한국복합재료학회)
권호 표지

Mechanical Properties of SiCp/AC8A Composites Fabricated by Pressureless Metal Infiltration Process

무가압함침법으로 제조한 SiCp/AC8A 복합재료의 기계적 성질

  • 김재동 (경상대하교 해양산업연구소) ;
  • 고성위 (부경대학교 기계공학부) ;
  • 김형진 (경상대학교 수송기계공학부)
  • Published : 2002.06.01
Download PDF
⟨ Previous Next ⟩

Abstract

The effect of size of SiC particles and additive Mg content on the mechanical properties and wear characteristics were investigated for the SiCp/AC8A composites fabricated by pressureless infiltration process. Results showed that the hardness and the bending strength increased with decreasing the size of SiC particle. By increasing the Mg content the hardness of SiCp/AC8A composites increased due to the hard reaction products, however the bending strength decreased by formation of coarse precipitates and high porosity level. The SiCp/AC8A composites exhibited about 6 times higher wear resistance compared with AC8A alloy at high sliding velocity and as increasing the particle size, wear resistance was improved. The major wear mechanical of SiCp/AC8A composites exhibited the abrasive wear at low to high sliding velocity whereas AC8A alloy showed adhesive and melt wear at high sliding velocity.

무가압함침법에 의해 제조된 SiCp/AC8A복합재료에 대하여 SiC 입자 크기와 부가적인 Mg의 첨가가 복합재료의 기계적 성질과 마모특성에 미치는 영향을 조사하였다. SiCp/AC8A복합재료의 경도와 굽힘강도는 입자의 크기가 작아짐에 따라 증가하였다. Mg 첨가량이 증가함에 따라 SiCP/AC8A복합재료의 경도는 경질의 반응생성물에 의해 상승하였으나 굽힘강도는 석출물의 조대화와 기공율의 증대에 의해 저하하였다. SiCp/AC8A복합재료는 AC8A 기지재에 비하여 고속의 마찰속도에서 6배의 내마모성을 나타냈으며 강화입자의 크기가 작아짐에 따라 내마모성은 향상되는 것으로 나타났다. 마모기구에 있어서 SiCp/AC8A복합재료는 마찰속도에 관계없이 연삭마모를 나타냈으나 AC8A 기지재는 마찰속도가 고속화됨에 따라 응착 및 용융마모의 마모면을 나타냈다.

Keywords

References

  1. Mat. Sci. & Eng. v.A191 Reactions at the matrix/reinforcement interface in aluminum alloy matrix composites Mogilevsky, R.;Bryan, S. R.;Wolbach, W.S.;Krucek, T. W.;Maier, R. D.;Shoemaker, G. L.;Chabala, J. M.;Soni, K. K.;Levi-Setti, R.
  2. J. of Mat. Sci. v.31 Microstructure, tensile properties and fracture behaviour of $Al_2O_3$particulate-reinforced aluminum alloy metal matrix composites Sirvatsan, T. S. https://doi.org/10.1007/BF00353120
  3. J. of Mat. Sci. v.28 Influence of heat treatment on the tensile properties and fracture behaviour of an aluminium alloy-ceramic particle composites Sirvatsan, T. S.;Viattingly, J. https://doi.org/10.1007/BF01151235
  4. 대한금속재료학회 v.33 no.3 SiCw 강화 Al기 복합재료의 제조 및 기계적 특성 전정식;이호인;유연철
  5. J. of Mat. Sci. v.31 Micromechanics analysis of particulate-reinforced composites and their mechanisms Dong, Z.;Wu, Y. https://doi.org/10.1007/BF00356467
  6. J. of Mat. Sci. v.29 Thermal treatment effects in SiC/AI metal matrix composite Swandlehurst, S. J.;Hall, I. W. https://doi.org/10.1007/BF00351434
  7. Mat. Sci. & Eng. v.A144 Novel reinforced ceramics and metal : a review of Lanxide's composite technologies Urquhart, A. W.
  8. J. of Mat. Sci. v.26 The fabrication of metal matrix composites by pressureless infiltration technique Aghajanian, M. K.;Rocazella, M. A.;Burke, J. T.;Keck, S. D. https://doi.org/10.1007/BF00576541
  9. Research Guideline for Aluminum Product Application in Transportation and Industry : ASME Workshop Reinforced Aluminum Metal Matrix Composites Via Pressureless Metal Infiltration Aghajanian, M. K.
  10. J. of Mat. Sci. v.28 The effect of particulate loading on the mechanical behavior of $Al_2O_3$/Al Metal-Matrix composites Aghajanian, M. K.;Langensiepen, R. A.;Rocazella, M. A.;Leighton, J. T.;Anderson, C. A. https://doi.org/10.1007/BF00356415
  11. J. of Japan Inst. of Met. v.58 no.7 Development of Spontaneous Infiltration in-situ Production Process for Fabrication of Particulate Reinforced Aluminum Composites Nakata, H.;Chou, T.;Kanetake, N. https://doi.org/10.2320/jinstmet1952.58.7_803
  12. 한국복합재료학회 v.12 no.3 In-Situ 반응에 의한 $Al_2O_3$/Al기 복합재료의 제조 김재동;정해용;고성위
  13. J. of Mat. Sci. v.30 The effects of magnesium additions on the structure and properties of Al-7Si-10SiCp composites Sukumaran, K.;Pillai, S. G. K.;Pillai, R. M.;Kelukutty, V. S.;Pai, B. C.;Satyanarayana, K. G.;Ravikumar, K. K. https://doi.org/10.1007/BF00375250
  14. J. of Mat. Sci. v.30 Review : Role of magnesium in cast aluminium alloy matrix composites Pai, B. C.;Ramani, G.;Pillai, R. M.;Satyanarayana, K. G. https://doi.org/10.1007/BF00353012
  15. 대한금속학회지 v.34 no.1 $(Al_2O_3)_p$/6061 Al 복합재료의 계면반응 분석 이재철;김긍호;이정일;이호인
  16. J. Mat. Sci. v.29 The influence of temperature on the mechanical and fracture properties of a 20vol% ceramic particulate-reinforced aliminum matrix composite Hadinfard, M.J.;Healy, J.;Mai, Y.W. https://doi.org/10.1007/BF00355948
  17. J. of Mat. Sci. v.30 Particle effects on friction and wear of aluminium matrix composites Zhang, Z. F.;Zhang, L. C.;Mai, Y. W. https://doi.org/10.1007/BF01151519