Tribology and Lubricants

Korean Tribology Society (한국트라이볼로지학회)
권호 표지
DOI QR코드

DOI QR Code

A Study of Spur Gear Tooth Profile Modiscation Scheme for ScufEng Resistance Improvement

평기어의 스커핑 강도향상을 위한 치형수정 기술의 연구

  • 김태완 (부산대학교 기계기술연구소) ;
  • 황진영 (부산대학교 정밀기계공학과 대학원) ;
  • 조용주 (부산대학교 기계공학부)
  • Published : 2002.12.01
Download PDF
⟨ Previous Next ⟩

Abstract

The basic concept of ‘gear profile modification’ is to change a part of the involute profile to reduce the load in that area and appropriate profile modifications can help gears to run quietly and resist scoring., pitting, and tooth breakage. In this study, the modification of tooth profile to make a smooth transmission of the normal loads in spur gears has been developed. The modified tooth profile has been determined by the total deflection at contact points. We also compared our results with other experimental results.

Keywords

References

  1. journal of japan society of lubrication of engineers v.16 no.9 A study on the effect of tooth profile modification upon seizure resistance of heavy-duty gear Masaaki Yokoyama
  2. Dudley's Gear Handbook, 2nd Edition D.P.Townsend
  3. Handbook of Practical Gear Design Darle W. Dudley
  4. American Gear Maunfacturer Association Nomenclature of gear Tooth Failure Modes AGMA Standard
  5. 한국윤활학회지 v.16 no.5 Spur Gear의 미끄럼 마멸률에 관한 연구 김태완;문석만;조용주;구영필;조용주
  6. proceeding of the 6th japanese National Congress for Applied Mechanics The Dynamic Loads on gear Caused by the Varying Elasticity of the Mating Teeth Nakada, T.;Utagawa, M.
  7. Contact Mechanics K.L. Johnson
  8. Journal of Mechanisms, Transmissions, and Automation in Design v.107 Tooth Load Sharing in High-Contact Ratio Spur Gears A. H. Elkholy https://doi.org/10.1115/1.3258674
  9. Fundamentals of Gear Design Raymond J. Drago
  10. Journal of Mechanism, Transmissions, and Automation in Design v.110 Load and Stress Distributions in Spur adn Helical Gears V.Simon https://doi.org/10.1115/1.3258926
  11. Proc. Tribology Workshops Tribology of Gears and Spline Ku. P.M.