Structural Engineering and Mechanics

  • 제13권4호
  • /
  • Pages.411-428
  • /
  • 2002
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Thermomechanical buckling of rectangular, shear-deformable, composite laminated plates

  • Ge, Y.S. (Department of Civil Engineering, The University of Birmingham) ;
  • Yuan, W.X. (Department of Civil Engineering, The University of Birmingham) ;
  • Dawe, D.J. (Department of Civil Engineering, The University of Birmingham)
  • 발행 : 2002.04.25
⟨ 이전 논문 다음 논문 ⟩

초록

The B-spline finite strip method is developed for the prediction of the buckling of rectangular composite laminated plates under the combined action of applied uniaxial mechanical stress and increasing temperature. The analysis is conducted in two stages, namely an in-plane stress analysis in the pre-buckling stage to determine the pre-buckling stresses, followed by a buckling analysis using these determined stresses. The buckling analysis is based on the use of first-order shear deformation plate theory. The permitted lay-up of the laminates is quite general, within the constraint that the plate remains flat prior to buckling, and a wide range of boundary conditions can be accommodated. A number of applications is described and comparison of the results generated using the finite strip method is made with the results of previous studies.

키워드

참고문헌

  1. Chen, L.W., Brunelle, E.J. and Chen, L.Y. (1982), "Thermal buckling of initially stressed thick plates", J. Mech. Design, 104, 557-564. https://doi.org/10.1115/1.3256386
  2. Cheung, Y.K. and Fan, S.C. (1983), "Static analysis of right box girder bridges by spline finite strip method",Proc Inst. Civil Engineers, 75, 311-323. https://doi.org/10.1680/iicep.1983.1507
  3. Dawe, D.J. and Wang, S. (1992), "Vibration of shear-deformable beams using a spline-function approach", Int. J.Numer. Methods Eng., 33, 819-844. https://doi.org/10.1002/nme.1620330410
  4. Dawe, D.J. and Wang, S. (1994), "Buckling of composite plates and plate structures using the spline finite stripmethod", Composites Engineering, 4, 1099-1170. https://doi.org/10.1016/0961-9526(95)91285-O
  5. Dawe, D.J. (1995), "Finite strip buckling and postbuckling analysis", In Buckling and Post-buckling ofComposite Plates (editors Turvey, G.J. and Marshall, I.H.) Chapter 4, 108-153, Chapman & Hall, London.
  6. Dawe, D.J. and Wang, S. (1995), "Spline finite strip analysis of the buckling and vibration of rectangularcomposite laminated plates", Int. J. Mech. Sci., 37, 645-667. https://doi.org/10.1016/0020-7403(94)00086-Y
  7. Dawe, D.J. and Ge, Y.S. (2000), "Thermal buckling of shear-deformable composite laminated plates by thespline finite strip method", Comput. Methods Appl. Mech. Engrg, 185, 347-366. https://doi.org/10.1016/S0045-7825(99)00266-2
  8. Gowda, R.M.S. and Pandalai, K.A.V. (1970), "Thermal buckling of orthotropic plates", In Studies in StructuralMechanics (editor Pandalai, K.A.V.), 9-44, IIT, Madras.
  9. Leissa, A.W. (1986), "Conditions for laminated plates to remain flat under inplane loading", CompositeStructures, 6, 261-270. https://doi.org/10.1016/0263-8223(86)90022-X
  10. Noor, A.K. and Peters, J.M. (1992), "Thermomechanical buckling of multilayered composite plates", J. EngngMechanics, ASCE, 118, 351-366. https://doi.org/10.1061/(ASCE)0733-9399(1992)118:2(351)
  11. Noor, A.K. and Peters, J.M. (1993), "Thermomechanical buckling and postbuckling of multilayered compositepanels", Composite Structures, 23, 233-251. https://doi.org/10.1016/0263-8223(93)90225-F
  12. Qatu, M.S. and Leissa, A.W. (1993), "Buckling or transverse deflections of unsymmetrically laminated platessubjected to in-plane loads", AIAA Journal, 31, 189-194. https://doi.org/10.2514/3.11336
  13. Sai Ram, K.S. and Sinha, P.K. (1992), "Hygrothermal effects on the buckling of laminated composite plates",Composite Structures, 21, 233-247. https://doi.org/10.1016/0263-8223(92)90051-D
  14. Srinivas, S. and Rao, A.K. (1969), "Buckling of thick rectangular plates", AIAA Journal, 7, 1645-1646. https://doi.org/10.2514/3.5463
  15. Tauchert, T.R. (1995), "Temperature and absorbed moisture", In Buckling and Post-buckling of CompositePlates, (editors Turvey, G.J., and Marshall, I.H.) Chapter 5, 190-226, Chapman & Hall, London.
  16. Thangaratnam, K.R. and Ramachandran, J. (1989), "Thermal buckling of composite laminated plates", Comput.& Structures, 32, 1117-1124. https://doi.org/10.1016/0045-7949(89)90413-6
  17. Timoshenko, S.P. and Gere, J.M. (1961), Theory of Elastic Stability, 2nd Edition, McGraw-Hill, London.
  18. Turvey, G.J. and Marshall, I.H. (editors) (1995), Buckling and Post-buckling of Composite Plates. Chapman &Hall, London.
  19. Wang, S. and Dawe, D.J. (1997), "Spline finite strip analysis of the buckling and vibration of compositeprismatic plate structures", Int. J. Mech. Sci., 39, 1161-1180. https://doi.org/10.1016/S0020-7403(97)00011-8
  20. Whitney, J.M. and Ashton, J.E. (1971), "Effect of environment on the elastic response of layered compositeplates", AIAA Journal, 9, 1708-1713. https://doi.org/10.2514/3.49976
  21. Yang, I.H. and Shieh, J.A. (1988), "Generic thermal buckling of initially stressed anti-symmetric cross-ply thicklaminates", Int. J. Solids & Stuctures, 24, 1059-1070. https://doi.org/10.1016/0020-7683(88)90107-2

피인용 문헌

  1. Use of the finite strip method in predicting the behaviour of composite laminated structures vol.57, pp.1-4, 2002, https://doi.org/10.1016/S0263-8223(02)00059-4
  2. Nonlinear zigzag theory for electrothermomechanical buckling of piezoelectric composite and sandwich plates vol.184, pp.1-4, 2006, https://doi.org/10.1007/s00707-006-0318-7
  3. Thermomechanical postbuckling of composite laminated plates by the spline finite strip method vol.71, pp.1, 2005, https://doi.org/10.1016/j.compstruct.2004.12.003