Determination of Design Parameters for Automobile Parts Recycling

자동차 부품의 재활용을 위한 설계시의 주요인자 결정

  • Published : 2003.01.01

Abstract

In this paper, same parts of a domestic automobiles and foreign automobiles are disassembled fur the evaluation of disassemblability, especially door trim and bumper. Influencing factors of disassembly are determined by the classification of bottleneck process in disassembly process. On the bases of disassembly sequence and structure of parts and subassembly, disassemblability is classified into aye categories. The influencing factors, which are related with the five categories are determined. By these relations, the checklist for disassembly evaluation is draw up and score tables of checked factors are established. For the establishing the disassembly score tables, the weighting values of each five categories are calculated by the disassembly test of automobiles and then, the weighting values of each influencing factors of five categories are calculated by the method of AHP (Analytic Hierarchy Process). And the last, the weighting values are modified and recalculated from the disassembly test. Using these weighting values, the score of influencing factors are determined and then, the score tables are established based on the score of influencing factors.

Keywords

References

  1. Seliger, G., Heinemeiner, H. J., 'Robotergefuihete Demontage und Montage von Kleingetrieben fur die Austauschfertigung(교체 가공을 위한 소형 기어의 로보트를 이용한 분리 및 조립),' ZwF88, pp. 245-248, 1993
  2. Boothroyd, G., Alting, L., 'Design for Assembly and Disassembly,' Annals of the CIRP, Vol. 41, No. 2, pp. 625-635, 1992 https://doi.org/10.1016/S0007-8506(07)63249-1
  3. Boothroyd, G., 'Assembly Automation and Product Design,' Marcel Dekker, Inc., pp. 181-208, 1992
  4. 목학수, 문광섭, 김형주, 양태일, '자동차 부품의 조립용이성과 분리용이성,' 한국 학술 진흥 재단, pp. 101-114, 1996
  5. Ehud Kroll, Bad S. Carverm, 'Disassembly analysis through time estimation and other metrics,' Annals of the RCIM, pp. 191-200, 1999
  6. 목학수, 문광섭, 김성호, 문대성, '자원재활용을 이용한 자동차 조립군의 복잡도 평가시스템,' 한국정밀공학회, 제15권, 제5호, pp. 132-144, 1999
  7. Daabub, A.M. et al, 'A Computer-based intelligent System for design for assembly,' Computer & Engineering, Vol. 3.7, pp. 111-115, 1999 https://doi.org/10.1016/S0360-8352(99)00034-0
  8. Daabub, A.M. et al, 'Disassembly analysis through times estimation and other metrics,' Robotics and Computer Integrated Manufacturing, Vol. 15, 9, pp. 191-200, 1999 https://doi.org/10.1016/S0736-5845(99)00026-5
  9. Uhlmann, E., Seliger, G., Hartwig, J., Keil, T., 'Pilot Disassembly System for Home appliance using new Tools and concepts,' In: Proceedings of the 3rd World Congress on Intelligent Manufacturing Process and Systems, Cambridge, June 2000