한국정밀공학회지 (Journal of the Korean Society for Precision Engineering)

  • 제20권3호
  • /
  • Pages.35-41
  • /
  • 2003
  • /
  • 1225-9071(pISSN)
  • /
  • 2287-8769(eISSN)
한국정밀공학회 (Korean Society for Precision Engineering)
권호 표지

Multihole 블랭킹 가공시 최적 레이아웃 설계시스템의 개발

Development of Optimal Layout Design System in Multihole Blanking Process

  • 정성재 (부산대학교 정밀기계공학과 대학원) ;
  • 김동환 (부산대학교 정밀정형 및 금형가공연구소) ;
  • 김병민 (부산대학교 정밀정형 및 금형가공연구소) ;
  • 전영학 (㈜동호에이텍)
  • 발행 : 2003.03.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The multihole blanking of thin sheet metal using progressive die set is an important process on production of precision electronic machine parts such as IC leadframe. In this paper, in order to investigate the influence of blanking order on the final lead profile and deformed configuration, simulation technique for progressive blanking process is proposed and analyzed by LS-DYNA. The results of FE-simulations are in good agreement with the experimental results. Consequently, from the results of FE-analysis based on the procedure proposed in this paper, it is possible to predict the deformation of lead and to manufacture high precision leadframes in progressive blanking process and these results might be used as a guideline to develop layout design system in multihole blanking process.

키워드

참고문헌

  1. 고대철, 김철, 김병민, 최재찬, '요소제거기법에 의한 판재 전단 가공의 유한요소 시뮬레이션,' 한국정밀공학회지, 제 13 권, 제 11 호, pp. 114-123, 1996
  2. Taupin, E., Breitling, J., Wu, W. T., Altan, T., 'Material fracture and burr formation in blanking results of FEM simulation and comparison with experiments,' J. of Mat. Proc. Tech., Vol. 59, No. 1-2, pp. 68-78, 1996 https://doi.org/10.1016/0924-0136(96)02288-1
  3. Faura, F., Garcia, A., Estrems, M., 'Finite element analysis of optimum clearance in the blanking process,' J. of Mat. Proc. Tech., Vol. 80-81, No. 1, pp. 121-125, 1998 https://doi.org/10.1016/S0924-0136(98)00181-2
  4. Samuel, M., 'FEM simulation and experimental analysis of parameters of influence in the blanking process,' J. of Mat. Proc. Tech., Vol. 84, No. 1-3, pp. 97-106, 1997 https://doi.org/10.1016/S0924-0136(98)00083-1
  5. Jimma, T., Sekine, F., Sekiya, K., Shouzui, S. I., Morimoto, W., 'Research on Precision Blanking of Electronic Machine Parts,' J. of JSTP, Vol. 28, No. 315,pp. 355-362, 1987
  6. 천선규, 한철호, 'A study on the precision improvement of lead frame in blanking process,' 99 한국정밀공학회 춘계학술대회, pp. 1027-1030
  7. 임상헌, 서의권, 심현보, 'A study on the characteristics for the blanking of lead frame with the rectangular shape blanking,' 한국정밀공학회지, 제 18 권, 제 3 호, pp. 182-188, 2001
  8. Pyttel, T., John, R. and Hoogen, M., 'A finite element based model for the description of aluminium sheet blanking,' Int. Journal of Machine Tools & Manufacture, Vol. 40, No. 14, pp. 1993-2002, 2000 https://doi.org/10.1016/S0890-6955(00)00043-2
  9. 조형근, 김동환, 이선봉, 김병민, '반도체 리드 프레임의 형상 동결성에 관한 연구,' 2001 한국소성가공학회 춘계학술대회, pp. 77-80, 2001