Journal of Mechanical Science and Technology

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지

An Experimental Study of Nonlinear Viscoelastic Bushing Model for Axial Mode

  • Lee, Seong-Beom (School of Mechanical and Automotive Engineering, Inje University) ;
  • Shin, Jung-Woog (Department of Biomedical Engineering, Inje University) ;
  • Alan S. Wineman (Department of Mechanical Engineering, University of Michigan)
  • Published : 2003.09.01
Download PDF
⟨ Previous Next ⟩

Abstract

A bushing is a device used in automotive suspension systems to cushion the force transmitted from the wheel to the frame of the vehicle. A bushing is essentially a hollow cylinder which is bonded to a solid metal shaft at its inner surface and a metal sleeve at its outer surface. The shaft is connected to the suspension and the sleeve is connected to the frame. The cylinder provides the cushion when it deforms due to relative motion between the shaft and sleeve. The relation between the force applied to the shaft or sleeve and its deformation is nonlinear and exhibits features of viscoelasticity. An explicit force-displacement relation has been introduced for multi-body dynamics simulations. The relation is expressed in terms of a force relaxation function and a method of determination by experiments on bushings has been developed. Solutions allow for comparison between the force-displacement behavior by experiments and that predicted by the proposed method. It is shown that the predictions by the proposed force-displacement relation are in very good agreement with the experimental results.

Keywords

References

  1. Adkins, J. E. and Gent, A. N., 1954, 'Load-Deflection Relations of Rubber Bush Mountings,' British Journal of Applied Physics, Vol. 5, pp. 354-358 https://doi.org/10.1088/0508-3443/5/10/305
  2. Kim, Bong-Kyu and Youn, Sung-Kie, 2001, 'A Viscoelastic Constitutive Model of Rubber Under Small Oscillatory Loads Superimposed on Large Static Deformation,' Transactions of KSME, Vol. 25, No.4, pp.619-628
  3. Lee, S. and Wineman, A. S., 1999, 'A Model for Non-Linear Viscoelastic Axial Response of an Elastomeric Bushing,' International Journal of Non-Linear Mechanics, Vol. 34, pp. 779-793 https://doi.org/10.1016/S0020-7462(98)00003-1
  4. McGuirt, C. W., Lianis, G., 1970, 'Constitutive Equations for Viscoelastic Solids Under Finite Uniaxial and Biaxial Deformations,' Transactions of the Society of Rheology, Vol. 14, No.2, pp. 117-134 https://doi.org/10.1122/1.549182
  5. Morman, K. N., Jr., Kao, B. G. and Nagtegaal, J. C., 1981, 'Finite Element Analysis of Viscoelastic Elastomeric Structures Vibrating About Nonlinear Statically Stressed Configurations,' Fourth International Conference on Vehicle Structural Mechanics, Society of Automotive Engineers, Detroit, Michigan, pp. 83-92
  6. Pipkin, A. C. and Rogers, T. G., 1968, 'A NonLinear Integral Representation for Viscoelastic Behavior,' Journal of the Mechanics and Physics of Solids, Vol, 16, pp. 59-72 https://doi.org/10.1016/0022-5096(68)90016-1
  7. Wineman, A. S., VanDyke, T. and Shi, S., 1998, 'A Nonlinear Viscoelastic Model for one Dimensional Response of Elastomeric Bushings,' International Journal of Mechanical Sciences, Vol. 40, pp. 1295-1305 https://doi.org/10.1016/S0020-7403(98)00023-X