음향교정기의 아시아.태평양 지역 국제비교 결과

APMP (Asia Pacific Metrology Programme) Regional Intercomparison Results of Acoustic Calibrators

  • 서상준 (한국표준과학연구원 물리표준부 음향진동그룹) ;
  • 서재갑 (한국표준과학연구원 물리표준부 음향진동그룹) ;
  • 조문재 (한국표준과학연구원 물리표준부 음향진동그룹)
  • 발행 : 2003.08.01

초록

본 논문에서는 아시아ㆍ태평양 지역에서 실시한 음향교정기의 국제비교 결과를 검토, 분석하였다. 국제비교에 사용된 음향교정기는 음압레벨교정기와 피스톤폰이었으며, 출력음압레벨을 측정하기 위해 사용된 마이크로폰은 1" 및 1/2" 표준마이크로폰 (LS1P, LS2P)과 1" 및 1/2" 기준 마이크로폰 (WS1P/F, WS2P/F)이다. 표준 마이크로폰을 이용하여 측정한 결과는 만족스러웠으나 기준 마이크로폰을 사용하여 측정한 결과는 En 값이 ±1.0 이내에는 들었으나 상대적으로 큰 편차를 보였다. 이러한 결과는 기준 마이크로폰의 음압감도레벨의 부정확한 교정으로 나타났다. 새로이 제정된 기준 마이크로폰의 비교교정에 따라 정밀 교정한 값을 사용한 결과 외국 표준기관들이 측정한 출력음압레벨과 유사한 값을 얻을 수 있었다.

The results of the APMP (Asia Pacific Metrology Programme) regional intercomparison of acoustic calibrators were reviewed and analyzed. The artefacts used in intercomparison are a sound level calibrator and a pistonphone. The microphones used to measure the output pressure level are 1" and 1/2" standard microphones (LS1P, LS2P) as well as 1" and 1/2" reference microphones (WS1P/F, WS2P/F). The results obtained using standard microphones are satisfactory, but those obtained by the reference microphones, even though E/sub n/ values are within ±1.0, showed great deviations. Such results had come from the inaccurate calibration of reference microphones. By using the correct calibration results which were obtained by the recently established international standards, the new results were very similar to those of the foreign standard institutes.

키워드

참고문헌

  1. IEC 61094-1, Measurement Microphones-Part 1, Specifications for Laboratory Standard Microphones
  2. IEC 61094-4, Measurement Microphones-Part 4, Specifications for Working Standard Microphones
  3. Operating Manual for the B&K 4228 Pistonphone
  4. Guide to the Expression of Uncertainty in Measurement ISO
  5. IEC 60942, Acoustic Calibrators
  6. IEC 61094-2, Measurement Microphones-Part 2, Primary Method for Pressure Calibration of Laboratory Standard Microphones by the Reciprocity Technique
  7. IEC 61094-5, Measurement Microphones-Part 5, Method for Pressure Calibration of Working Standard Microphones by Comparison