응축기의 설계조건에서 R22, R407C, R410A의 압력강하 예측 및 실험

Prediction and Experiment of Pressure Drop of R22, R407C and R410A on Design Conditions of Condenser

  • 김창덕 ((주)센추리 기술연구소) ;
  • 박일환 (한국기술교육대학교 기계공학과) ;
  • 이진호 (연세대학교 기계공학과)
  • 발행 : 2004.01.01

초록

An experimental study on the refrigerant-side pressure drop of slit fin-tube heat exchanger has been carried out. A comparison was made between the predictions of previously proposed empirical correlations and experimental data for the pressure drop on design conditions of condenser in micro-fin tube for R22 and its alternatives, R407C (R32/125/134a, 23/25/52 wt.%) and R410A (R32/125, 50/50 wt.%). Experiments were carried out under the conditions of inlet refrigerant temperature of 6$0^{\circ}C$ and mass fluxes varying from 150 to 250 kg/$m^2$s for R22, R407C and R410A. The inlet air conditions are dry bulb temperature of 35$^{\circ}C$, relative humidity of 40% and air velocity varying from 0.68 to 1.43 m/s. Experiments show that pressure drop for R410A and R407C were 17.8∼20.2% and 5∼6.8% lower than those of R22 respectively for the degree of subcooling of 5$^{\circ}C$. For the mass fluxes of 200∼250 kg/$m^2$s, the deviation between the experimental and predicted values for the pressure drop was less than $\pm$20% for R22, R407C and R410A.

키워드

참고문헌

  1. US patent 4044797 Heat transfer pipe Fujii,K.;Itoh,N.;Innami,T.;Kimura,H.;Nakayama,N.;Yanugidi,T.
  2. Oji Intern Seminar Enhancement of condensation in a horizontal micro-fin tube for zeotropic refrigerant mixtures Itoh,M.;Shikazono,N.;Uchida,M.
  3. Enhanced Heat Transfer v.5 Heat transfer and pressure drop during evaporation and condensation of R22 inside 9.52mm O.D. microfin tubes of different geometries Muzzio,A.;Niro.A.;Arosio,S. https://doi.org/10.1615/JEnhHeatTransf.v5.i1.40
  4. ASHRAE Transaction, Symposia v.16 Experimental study on evaporation and condensation heat transfer enhancement for R-407C using Herringbone heat transfer tube Ebisu,T.;Torikoshi,K.
  5. International Journal of Refrigeration v.23 condensation heat transfer and flow pattern inside a herringbone-type micro-fin tube Miyara,A.;Nonaka,K.;Taniguchi,M. https://doi.org/10.1016/S0140-7007(99)00037-7
  6. Proc. 30th Natiional Symposia of Japan Condensation heat transfer of refrigerants HFC134a, HCFC123 and HCFC22 in horizontal smmoth tube and a horizontal microfin tube Haraguchi,H.;Koyama,S.;Esaki,J.;Fujii,T.
  7. NISTIR 6095 Horizontal convective condensation of alternative refrigerant within a micro-fin tube Kedzierski,M.A.;Goncaves,J.M.
  8. Heat and Technology v.15 Pressure drop during condensation and vaporization of refrigerants inside enhanced tube Cavallini,A.;Del Col D.;Doretti,L.;Longo,G.A.;Rossetto,L.
  9. Proceeding 2nd Internationl Symposia on Two Phase Flow and Experimentation v.3 Refrigerant heat transfer, pressure drop, and void fraction effects in microfin tubes Newell,T.A.;Shah,R.K.
  10. Study on the prediction of pressure drop for condensation and evaporation of alternative refrigerants in microfin tube Choi,J.Y.
  11. International Proceeding of IIF-IIR Commision B1 v.B4 Generalized pressure drop correlation for evaporation and condensaton in smooth and microfin tube Choi,J.Y.;Kedzierski,M.A.;Domanski,P.A.
  12. Fundamental Handbook (SI) ASHRAE
  13. Thermodynamic and transport properties of refrigerants and refrgerant mixtures database (REFRPPP), Ver. 5.01 MicLinden,M.O.;Klein,S.A.;Lemmon,E.W.;Peskin,A.P.
  14. ORNL/CON-80/R1 The Oak Ridge heat pump models : Ⅰ, A steady-state computer design model for air-to-air heat pumps Fisher,S.K;Rice,C.K.
  15. International Journal of Refrigerant v.14 Performance simulation of single-evaporator domestic refrigerants charged with pure and mixed refrigerant Jung,D.S.;Radermacher,R. https://doi.org/10.1016/0140-7007(91)90007-4
  16. Heat Transfer Engineering v.4 Heat transfer performance of internally finned tube Carnavos,T.C.
  17. International Journal of Heat and Mass Transfer v.39 In-tube evaporationof HCFC-22 in a 9.52mm micro/smooth tube Kuo,C.C.;Wang,C.C.
  18. Transaction of ASME v.3 Pressure loses in smooth pipe bends, Basic Engineering Ito,H.
  19. Convective Boiling and Condensation(3rd ed.) Collier,J.G.;Thome,J.R.
  20. ASHRAE Transaction no.2342 Return bend pressure drop in refrigeration system Geary,F.D.
  21. International Journal of Refrigeration v.12 Heat transfer and pressure drop during evaporation and condensation of R22 in horizontal micro-fin tubes Schlager,L.M.;Pate,M.G.;Bergles,A.E.
  22. International Journal of Refrigeration v.24 Experimental investgation on condensation heat transfer and pressure drop of new HFC refrigerants Cavalini,A.;Censi,D.;Del Col,L.;doretti,L.;Longo,G.A.;Rossetto,L. https://doi.org/10.1016/S0140-7007(00)00070-0
  23. ASHRAE Transactions v.102 Two-phase heat transfer and friction characteristics of R-22 and R-407C Wang,C.C.;Kuo,C.S.;Chang,Y.J.;Lu,D.C.
  24. International Journal of Refrigeration v.26 Condensation of refrigerants in horizontal microfic tube: comparison of correlations for frictional pressure drop Wang,H.S.;Rose,J.W.;Honda,H. https://doi.org/10.1016/S0140-7007(02)00159-7