한국정밀공학회지 (Journal of the Korean Society for Precision Engineering)

  • 제21권3호
  • /
  • Pages.15-21
  • /
  • 2004
  • /
  • 1225-9071(pISSN)
  • /
  • 2287-8769(eISSN)
한국정밀공학회 (Korean Society for Precision Engineering)
권호 표지

드릴에 의한 유리섬유강화플라스틱의 절삭특성에 관한 연구

A Study on the Cutting Characteristics of the Glass Fiber Reinforced Plastics by Drill Tools

  • 박종남 (조선대학교 대학원 기계공학과) ;
  • 조규재 (조선대학교 대학원 기계공학과)
  • 발행 : 2004.03.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Composite materials are widely used to make all kinds of machine parts, internal and structural materials of cars, aerospace industries, building structures, ship materials, sporting goods and others. It is worth the while to use composite materials as various substitutions when compared with others. But the use is limited in the field of the mechanical processing because of its difficulties in processing. Thus, it is proved that the surface is rough in and out of the hole processing the GFRP with HSS drill in the vertical machining center.

키워드

참고문헌

  1. 문창권, '고분자 복합재료', 시그마프레스, 2000
  2. Bang, K. G., Kim, H. S., Lee, D. G. and Jeon, H. S., 'Development of Guide Roller Using Electroplated Carbon Fiber Composite for Thin Polymer Film Processing', Composite Structures, Vol. 38, pp. 321-328, 1997 https://doi.org/10.1016/S0263-8223(97)00066-4
  3. Namgung, S., Kim, H. C. and Lee, W. Y., 'A Study on Effects of the Fiber Orientation and Point Angle on Drilling characteristics of Carbon fiber Epoxy composite Materials', Journal of the Korean society of Precision Engineering, Vol. 14, pp. 119-125, 1997
  4. Ho-Cheng, H., Dharan, C. K. H., 'Delamination During Drilling in Composite Laminates', Transactions of the ASME, PP.236-239, 1990
  5. Kim, D. H., Kim, W. S. and Kim, K. W., 'A Study on the Machining Properties of CU175NS Composite Laminates', Transactions of the Korean Society of Machine Tool Engineers, Vol. 10, No. 1, pp.88-93, 2001
  6. Nig, W. K., Wulf, Ch., GraB, P. and H. Willers cheid, 'Machining of Fiber Reinforced Plastic', Annals of the CIRP, Vol. 38, No. 1, pp. 119-124, 1989 https://doi.org/10.1016/S0007-8506(07)62665-1
  7. Wang, D. H., Nakayama, K. and Arai, M., 'Improvement of Surface Finish in the Cutting of GFRPC', Proceedings of the First International conference on New Manufacturing Technology, pp. 33-38, 1990
  8. Sakuma, K., Seto, M., 'Tool Wear in Cutting Glass Fiber Reinforced Plastics', The Relationship between Fiber Orientation and Tool Ware, Bulletin of JSME, Vol. 26, No. 218, pp. 1420-1427, 1983