Transactions of the Korean Society of Mechanical Engineers A (대한기계학회논문집A)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

The Inspection of Press Forming Product Through Application of Reverse Engineering System

역설계 시스템 적용을 통한 프레스 성형물 검사

  • 김민주 (동아대학교 기계공학과) ;
  • 김수용 (동아대학교 대학원 기계공학과) ;
  • 이승수 (동아대학교 기계공학과) ;
  • 전언찬 (동아대학교 기계ㆍ산업시스템 공학부)
  • Published : 2004.09.01
Download PDF
⟨ Previous Next ⟩

Abstract

This study is an inspection of press forming product and mould using reverse engineering system. The inspection process on production field involves a lot of errors because of the hand-work so we focussed on improving the measured precision through performing the effective inspection using 3D non-contact scanner. By so doing that, we improved the precision of press forming product by analyzing the cause following the inspection result. Through the inspection, we applied it to the reverse engineering and we could improve the inspection process.

Keywords

References

  1. Lee, H. Z., Ko, T. J. and Kim, H. S., 1999, 'Rational B-spline Approximation of Point Data For Reverse Engineering,' Journal of the Korean Society of Precision Engineering, Vol. 16, No. 5, pp. 160-168
  2. Woo, H. J. and Lee, K. H, 1999, 'Rapid Prototyping from Reverse Engineered Geometric Data,' Journal of the Korean Society of Precision Engineering, Vol. 16, No. 1, pp. 95-107
  3. Choi, Y. and Park, J. P., 1999, 'Reverse Enginnering System Based on 3D Digitizer,' Journal of the Korean Society of Precision Engineering, Vol. 16, No. 4, pp. 102-109
  4. Lee, S. Y. and Lim, S. G., 2001, 'Three Dimensional Measurements Using Machine Vision,' Journal of the Korean Society of Precision Engineering, Vol. 18, No. 3, pp. 18-22
  5. Park, Y. C, Jeong, K. M., Jang, S. J. and Park, K. K., 2001, 'A Study on the Grating Projection method using Polygon Mirror,' Journal of the Korean Society of Precision Engineering, Vol. 18, No. 6, pp. 159-165
  6. Park, Y. C, 2000, 'The Principle and Applications of Moire Phenomenon,' Journal of the Korean Society of Precision Engineering, Vol. 17, No. 6, pp. 25-31
  7. Kim, S. W., Choi, Y. B., Oh, J. T. and Jung, M. S., 1998, 'Phase-shifting Grating Projection Moire Topography,' Journal of the Korean Society of Mechanical Engineers(A), Vol. 22, No. 5, pp. 850-857
  8. Jang, S. and Joo, J. H., 2003, 'Introduction to Classical and Modern Optics,' Dooyang Pub. Co., Seoul, pp. 260-263
  9. Kim, N. H. and Choi, J. S., 2000, 'Easy mold,' Gijeon Pub. Co., Seoul, pp. 23-26