설비공학논문집 (Korean Journal of Air-Conditioning and Refrigeration Engineering)

  • 제16권10호
  • /
  • Pages.923-931
  • /
  • 2004
  • /
  • 1229-6422(pISSN)
  • /
  • 2465-7611(eISSN)
대한설비공학회 (The Society of Air-Conditioning and Refrigerating Engineers of Korea)
권호 표지

고정격자를 이용한 동결건조 해석프로그램의 개발

Development of Freeze Drying Analysis Program using Fixed Grid

  • 발행 : 2004.10.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

A multi-dimensional freeze drying analysis program, which took simultaneous heat and mass transfer, sublimation of ice and motion of sublimation front into full account, was developed using finite volume method with fixed grid. The effect due to the motion of sublimation interface was modeled by an enthalpy formulation streamlined for the freeze drying problems. The efficiency and accuracy of the program was validated by solving one- and two-dimensional freeze drying problems frequently encountered in industrial processes. Finally, the freeze drying processes of cylinder and slab objects with permeable side surfaces were simulated, which demonstrated the capability of the present analysis program in solving multi-dimensional freeze drying problems with complex sublimation interface configurations.

키워드

참고문헌

  1. Millman, M.J., Liapis, A. I. and Marchello, J. M., 1985, An analysis of the lyophilization process using a sorption-sublimation model and various operation policies, AIChE J., Vol. 31, pp.1594-1604 https://doi.org/10.1002/aic.690311003
  2. Liapis, A. I., 1987, Freeze drying, in A. S. Mujumdar (Ed.) Handbook of Industrial Drying, Marcel Dekker, New York, pp.295-326
  3. Ratti, C., 2001, Hot air and freeze-drying of high-value foods: a review, J. Food Eng., Vol. 49, pp.311-319 https://doi.org/10.1016/S0260-8774(00)00228-4
  4. Lin, S., 1981, An exact solution of the sublimation problem in a porous medium, J. Heat Transfer, Vol. 103, pp. 165-168 https://doi.org/10.1115/1.3244413
  5. Fey, Y. C. and Boles, M. A, 1988, Analytic study of vacuum-sublimation in an initially partially filled frozen porous medium with recondensation, Int. J Heat Mass Transfer, Vol. 31, pp.1645-1653 https://doi.org/10.1016/0017-9310(88)90277-3
  6. Peng, S.-W. and Chen, G.-Q., 1994, Coupled heat and mass transfer with one discrete sublimation moving interface and one desorption mushy zone, J Heat Transfer, Vol. 116, pp. 215-220 https://doi.org/10.1115/1.2910858
  7. Liapis, A. I. and Litchfield, R. J., 1979, Optimal control of a freeze dryer, Chem. Eng. Sci., Vol. 34, pp.975-981 https://doi.org/10.1016/0009-2509(79)85009-5
  8. Liapis, A 1. and Bruttini, R, 1994, A theory for the primary and secondary drying stages of the freeze-drying of pharmaceutical crystalline and amorphous solutes: comparison between experimental data and theory, Separ. Technol., Vol. 4, pp. 144-155 https://doi.org/10.1016/0956-9618(94)80017-0
  9. Sadikoglu, H. and Liapis, A. I., 1997, Math-ematical modeling of the primary and sec-ondary drying stages of bulk solution freeze-drying in trays: parameter estimation and model discrimination by comparison of theo-retical results with experimental data, Dry-ing Technol., Vol. 15, pp.791-810 https://doi.org/10.1080/07373939708917262
  10. Sheehan, P. and Liapis, A. I., 1998, Modeling of the primary and secondary drying stages of the freeze drying of pharmaceutical pro-ducts in vials: numerical results obtained from the solution of a dynamic and spa-tially multi-dimensional lyophilization model for different operation policies, Biotechnol. Bioeng., Vol. 60, pp.712-728 https://doi.org/10.1002/(SICI)1097-0290(19981220)60:6<712::AID-BIT8>3.0.CO;2-4
  11. Ang, T. K, Ford, J. D. and Pei, D. C. T., 1977, Microwave freeze-drying of food: a theoreti-cal investigation, Int. J. Heat Mass Trans-fer, Vol. 20, pp.517-526 https://doi.org/10.1016/0017-9310(77)90098-9
  12. Lombrana, J. I., Elvira, C. D. and Villaran, M. C., 1997, Analysis of operation strategies in the production of special foods in vials by freeze drying, Int. J. Food Sci. Technol., Vol. 32, pp. 107-115 https://doi.org/10.1046/j.1365-2621.1997.00382.x
  13. Wang, Z.H. and Shi, M. H., 1998, Numerical study on sublimation-condensation phenom-ena during microwave freeze drying, Chem. Eng. Sci., Vol. 53, pp.3189-3197 https://doi.org/10.1016/S0009-2509(98)00103-1
  14. Wang, Z. H. and Shi, M. H., 1998, The effect of sublimation-condensation region on heat and mass transfer during microwave freeze drying, J Heat Transfer, Vol. 120, pp.654-660 https://doi.org/10.1115/1.2824333
  15. Ferguson, W. J. and Lewis, R. W., 1993, A finite element analysis of freeze-drying of a coffee sample, Comp. Meth. Appl. Mech. Eng., Vol. 108, pp.341-352 https://doi.org/10.1016/0045-7825(93)90009-M
  16. Mascarenhas, W. J., Akay, H. U. and Pikal,M. J., 1998, A computational model for finite element analysis of the freeze-drying pro-cess, Comp. Meth. Appl. Mech. Eng., Vol. 148, pp. 105-124
  17. Evans, R. B., Watson, G. M. and Mason, E. A., 1962, Gaseous diffusion in porous media, J. Chem. Phys., Vol. 36, pp.1894-1902 https://doi.org/10.1063/1.1701287
  18. Song, C. S., Nam, J. H., Kim, C.-J. and Ro, S. T., 2002, A finite volume analysis of va-cuum freeze drying processes of skim milk solution in trays and vials, Drying Technol., Vol. 20, pp.283-305.