한국정밀공학회지 (Journal of the Korean Society for Precision Engineering)

  • 제22권7호
  • /
  • Pages.191-199
  • /
  • 2005
  • /
  • 1225-9071(pISSN)
  • /
  • 2287-8769(eISSN)
한국정밀공학회 (Korean Society for Precision Engineering)
권호 표지

6자유도 진동 흡진기의 기하적 설계 이론

Geometrical Design Theory of a 6 DOF Vibration Absorber

  • 장선준 (연세대학교 대학원 기계공학과) ;
  • 최용제 (연세대학교 기계공학부)
  • 발행 : 2005.07.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Many researchers have been investigating the design of multi-mode absorption vibration absorber for multi degree-of-freedom (DOF) system. The approach taken to this problem has been to find the optimized constants of stiffness and damping for the given set of single-DOF absorbers or single multi-DOF absorber attached to a multi degree-of-freedom system. This paper presents a novel geometrical and direct design theory of a 6 DOF vibration absorber via screw theory. Theoretical development is demonstrated by a practical example in which the diagonal stiffness matrix is synthesized using rectangular configuration of springs. The performance of this absorber is simulated by modal analysis.

키워드

참고문헌

  1. Vakakis, A. F., Paipetis, S. A., 'The effect of a viscously damped dynamic absorbers on a linear multi-degree-of-freedom system,' Journal of Sound and Vibration 105, pp. 49-60, 1986 https://doi.org/10.1016/0022-460X(86)90219-1
  2. Sadek, F., Mohraz, B., Taylor, A. W., Chung, R. M., 'A method of estimating the parameters of tuned mass dampers for seismic applications,' Earthquake Engineering and Structural Dynamics 26 pp. 617-635, 1997 https://doi.org/10.1002/(SICI)1096-9845(199706)26:6<617::AID-EQE664>3.0.CO;2-Z
  3. Zuo, L., Nayfeh, -S. A., 'Minmax optimization of multi-degree-of-freedom tuned-mass dampers,' Journal of Sound and Vibration 272 893-908, 2004 https://doi.org/10.1016/S0022-460X(03)00500-5
  4. Ball, R. S., 'The Theory of Screws,' Cambridge University Press, 1900
  5. Dimentberg, F. M., 'The Screw Calculus and its Application in Mechanics,' Foreign Technology Division, Wright-Patterson Air Force Base, Ohio. Document No. FTD-HT_23-1632-67, 1965
  6. Blanchet, P., Lipkin, H., 'Vibration Centers for Planar Motion,' ASME 1996 Design Engineering Technical Conferences, August 18-22, Irvine, 1996
  7. Dan, B. J., Choi, Y. J., 'Vibration Analysis via Screw Theory with Application to the Design of Information Storage Device,' Trans. of the KSME(A), Vol. 23, No.2, pp. 155-165, 1999
  8. Dan, B. J., Choi, Y. J., 'Vibration Stabilization of the Tracking System of an Optical Disc Drive,' Journal of KSPE, Vol. 16, No.1, pp. 191-199, 1999
  9. Blanchet, P., Lipkin, H., 'A New Design Methodology for Planar Vibration Absorbers,' ASME 1999 Design Engineering Technical Conferences, September 12-16, Las Vegas, DETC'99/VIB-8214, 1999
  10. Duffy, J., 'Statics and Kinematics with Applications to Robotics,' Cambridge University Press, 1996
  11. Choi, Y. J., 'Kinematic and Static Analyses of Robots via Screw Theory,' Journal of the KSME, Vol. 31, No.7, pp. 616-625,1991
  12. Loncaric, J., 'Normal Forms of Stiffness and Compliance Matrices,' IEEE Journal of Robotics and Automation, RA-3, 1987
  13. Ciblak, N., Lipkin, H., 'Synthesis of Cartesian stiffness for robotic applications,' IEEE Conference Robotics and Automation, May 10-15, 1999, Detroit, Michigan, pp. 2147-2152, 1999 https://doi.org/10.1109/ROBOT.1999.770424
  14. Huang, S., Shimmels, J. M., 'The bounds and realization of spatial stiffness achieved with simple springs connected in parallel,' IEEE trans. Robotics and Automation, Vol. 14, No.3, pp. 466-475, 1998 https://doi.org/10.1109/70.678455
  15. Choi, K., Jiang, S., Li, Z., 'Spatial stiffness realization with parallel springs using geometric parameters,' IEEE Trans. Robotics and Automation, Vol. 18, No.3, 2002 https://doi.org/10.1109/TRA.2002.1019458