Transactions of Materials Processing (소성∙가공)

The Korean Society for Technology of Plasticity and materials processing (한국소성∙가공학회)
권호 표지
DOI QR코드

DOI QR Code

Lubrication and Cooling Characteristics of Warm Forging Lubricants

온간단조 윤활제의 윤활 및 냉각특성

  • 강종훈 (발레오 전장 시스템㈜) ;
  • 고병호 (발레오 전장 시스템㈜) ;
  • 제진수 (경상대학교 수송기계공학부) ;
  • 강성수 (부산대학교 정밀기계공학과)
  • Published : 2005.10.01
Download PDF
⟨ Previous Next ⟩

Abstract

Lubrication and cooling characteristics are the most important factors of elevated temperature forging lubricants. Usually adopted lubricants in warm forging processes are graphite, synthetic and emulsion lubricants. Most widely and effectively applied lubricants are graphite lubricants, but these have a lot of problems like tool corrosion and dusty environment. In this research, boronite lubricant is considered, because it is able to substitute for graphite. Hot ring compression test, cooling test and mass production test are performed to check the validity of new lubrication pigment.

Keywords

References

  1. M. Knoerr, 1996, Fatigue failure of cold forging tooling : causes and possible solutions through fatigue analysis, JMPT. Vol.46, pp. 57-71
  2. M.J.Liou, H.S. Hasiano, 1989, Prediction of die wear in high speed hot upset forging, ERC/NSM Report, No.99, pp. 33-39
  3. J. H. Kang, 1999, A study on a die wear model considering thermal softening: (I) construction of the wear model, JMPT, Vol.96, pp. 53-58 https://doi.org/10.1016/S0924-0136(99)00103-X
  4. J. H. Kang, 1999, A study on a die wear model considering thermal softening: (II) Application of the suggested wear model, JMPT, Vol. 94, pp. 183-188 https://doi.org/10.1016/S0924-0136(99)00104-1
  5. S. Shaljaskow, 2001, Tool lubricating systems in warm forging, JMPT, Vol. 113, pp. 16-21 https://doi.org/10.1016/S0924-0136(01)00645-8
  6. Schey, 1983, Tribology in Metalworking - friction, lubrication and wear, American society metals
  7. D. J. Jeong, B. M, Kim, 2001, Effects of surface treatments and lubricants for warm forging die life, JMPT, Vol. 113, pp. 544-550 https://doi.org/10.1016/S0924-0136(01)00693-8
  8. S. Sen, B. Aksakal, 2000, Transient and residual thermal stresses in quenched cylindrical bodies, Inter. J. Mech. Sci., Vol.42, pp. 2013-2029 https://doi.org/10.1016/S0020-7403(99)00063-6
  9. 진민호, 강성수, 2004, 냉 간단조용 SCM420 강의 퀜칭 시 열전달 예측모델 개발, 한국소성가공학회지, Vol.13, No.5. pp. 441-448
  10. J. U. Jang, 2002, FE Program development for predicting thermal deformation in heat treatment, JMPT, Vol.130, pp. 546-550 https://doi.org/10.1016/S0924-0136(02)00802-6

Cited by

  1. Numerical Evaluation of Backward Extrusion and Head Nosing for Producing a 6.75L Small Seamless AA6061 Liner vol.22, pp.4, 2013, https://doi.org/10.5228/KSTP.2013.22.4.204