한국세라믹학회지 (Journal of the Korean Ceramic Society)

  • 제42권12호
  • /
  • Pages.833-841
  • /
  • 2005
  • /
  • 1229-7801(pISSN)
  • /
  • 2234-0491(eISSN)
한국세라믹학회 (The Korean Ceramic Society)
권호 표지
DOI QR코드

DOI QR Code

SOFC 분리판용 Fe-Cr 합금의 특성에 미치는 합금성분의 영향

Effects of Alloying Elements on the Properties of Fe-Cr Alloys for SOFC Interconnects

  • 김도형 (포항산업과학연구원 부품신소재연구센타) ;
  • 전재호 (포항산업과학연구원 부품신소재연구센타) ;
  • 김승구 (포항산업과학연구원 부품신소재연구센타) ;
  • 전중환 (포항산업과학연구원 부품신소재연구센타)
  • 발행 : 2005.12.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The oxidation resistance and electrical conductivity of various commercial ferritic stainless steels including STS444 were tested in an air atmosphere at $700^{\circ}C$. Crofer22 developed specially for SOFC interconnect was also examined for the aim of comparing with the test results of STS444. Although STS444 exhibited higher oxidation resistance than Corfer22, the electrical conductivity of the scale formed on Crofer22 was higher, indicating that the resistivity of scale formed on Crofer22 is much lower than that of STS444. To gain a better understanding of the relation between oxidation behavior and electrical conductivity, the oxide scales formed on STS444 and Crofer22 were analyzed in terms of the structure, composition, and phase. Consequently, the influence of alloying elements on electrical conductivity of Fe-Cr alloys was discussed.

키워드

참고문헌

  1. K. Hung, P. Y. Hou, and J. B. Goodenough, 'Characterization of Iron-Based Alloy Interconnects for Reduced Temperature Solid Oxide Fuel Cells,' Solid State Ionics, 129 237-50 (2000) https://doi.org/10.1016/S0167-2738(99)00329-X
  2. W. Z. Zhu and S. C. Deevi, 'Development of Interconnect Materials for Solid Oxide Fuel Cells,' Mater. Sci. & Eng., A348 227-43 (2003)
  3. H. Tu and U. Stimming, 'Advances, Aging Mechanisms and Lifetime in Solid-Oxide Fuel Cells,' J. Power Sources, 127 284-93 (2004) https://doi.org/10.1016/j.jpowsour.2003.09.025
  4. K. C. Wincewicz and J. S. Cooper, 'Taxonomies of SOFC Material and Manufacturing Altematives,' J. Power Sources, 140 280-96 (2005) https://doi.org/10.1016/j.jpowsour.2004.08.032
  5. D.-H. Kim, J. H. Jun, S. G Kim, and J. H. Jun, 'Separator Materials for Solid Oxide Fuel Cells,' Ceramist, 7 [6] 76-81 (2004)
  6. F. Tietz, 'Materials Selection for Solid Oxide Fuel Cells,' Mater. Sci. Forum, 426-432 4465-70 (2003) https://doi.org/10.4028/www.scientific.net/MSF.426-432.4465
  7. T. Uehara, T. Ohno, and A. Toji, 'Development of Fe-Cr Alloy for SOFC Separator,' 5th European SOFC Forum, Switzerland, 1 281-88 (2002)
  8. H. Ralf, H. Winfried, and Q. W. Josef, 'Crofer 22 APU : New Material for Fuel Cells,' ThyssenKrupp Techforum, 20 (2003)
  9. Z. G. Yang, M. Walker, G. Xia, P. Singh, and J. Stevenson, 'Advanced Alloy Interconnect Development,' Presented at SECA-CTP Program Review, Albany, NY, 2003
  10. J. P. Albellan, F. Tietz, V. Shemet, A. Gil, T. Ladwein, L. Singheiser, and W. J. Quadakkers, 'Long Term Oxidation Behavior and Compatibility with Contact Materials of Newly Developed Ferritic Interconnect Steel,' 5th European SOFC Forum, Switzerland, vol. 1, 248-56 (2002)
  11. Z. Yang, J. S. Hardy, M. S. Walker, G. Xia, S. P. Simner, and J. W. Stevenson, 'Structure and Conductivity of Themally Grown Scales on Ferritic Fe-Cr-Mn Steel for SOFC Interconnect Applications,' J. Electrochem. Soc., 151 [11] A1825-31 (2004) https://doi.org/10.1149/1.1797031
  12. X. Chen, P. Y. Hou, C. P. Jacobson, S. J. Visco, and L. C. D. Jonghe, 'Protective Coating on Stainless Steel Interconnect for SOFCs : Oxidation Kinetics and Electrical Properties,' Solid State Ionics, 176 425-33 (2005) https://doi.org/10.1016/j.ssi.2004.10.004
  13. N. Sakai, T. Horita, Y. P. Xiong, K. Yamaji, H. Kishimoto, M. E. Brito, H. Yokokawa, and T. Maruyama, 'Structure and Transport Property of Manganese-Chromium-Iron Oxide as a Main Compound in Oxide Scales of Alloy Interconnects for SOFCs,' Solid State Ionics, 176 681-86 (2005) https://doi.org/10.1016/j.ssi.2004.11.012
  14. H. Kurokawa, K. Kawamura, and T. Maruyama, 'Oxidation Behavior of Fe-16Cr Alloy Interconnect for SOFC Under Hydrogen Potential Gradient,' Solid State Ionics, 168 13-21 (2004) https://doi.org/10.1016/j.ssi.2004.02.008
  15. K. Fujita, T. Hashimoto, K. Ogasawara, H. Kameda, Y. Matsuzaki, and T. Sakurai, 'Relationship between Electrochemical Properties of SOFC Cathode and Composition of Oxide Layer Formed on Metallic Interconnects,' J. Power Sources, 131 270-77 (2004) https://doi.org/10.1016/j.jpowsour.2003.12.050
  16. M. G. C. Cox, B. McEnaney, and V. D. Scott, 'Chemical Diffusion Model for Partitioning of Transition Elements in Oxide Scales on Alloys,' Philos. Mag., 26 839-51 (1972) https://doi.org/10.1080/14786437208226960
  17. A. V. Chichagov, Z. V. Shilova, and A. L. Lopatin, 'Information-Calculating System on Crystal Structure Data of Minerals,' Kristallografiya, 35 [3] 610-16 (1990)
  18. C. W. Bale, P. Chartrand, S. A. Degterov, G. Eriksson, K. Hack, R. Ben Mahfoud, J. Melancon, A. D. Pelton, and S. Petersen, 'FactS age Thermochemical Software and Databases,' Calphad, 26 [2] 189-228 (2002) https://doi.org/10.1016/S0364-5916(02)00035-4
  19. ThyssenKrupp, Patent, 'Ferritic Stainless Steel and Use there of in the Manufacture for High Temperature Resistant Products,' WO 03/027343 A1
  20. W. Z. Zhu and S. C. Deevi, 'Opportunity of Metallic Interconnects for Solid Oxide Fuel Cells : A Status on Contact Resistance,' Mater. Res. Bull., 38 957-72 (2003) https://doi.org/10.1016/S0025-5408(03)00076-X
  21. A. Webber and E. I. Tiffee, 'Materials and Concepts for Solid Oxide Fuel Cells (SOFCs) in Stationary and Mobile Applications,' J. Power Sources, 127 273-83 (2004) https://doi.org/10.1016/j.jpowsour.2003.09.024
  22. J. Urbanek, M. Miller, H. Schmidit, and K. Hilpert, 'Reduction of the Chromium Vaporization from the Metallic Interconnect by Perovskite Coatings,' Proc. 2nd European SOFC Forum, 2 503-12 (1996)
  23. J. Dunning, et al., 'Metallic Materials Development for SOFC Application,' Presented at SECA-CTP Program Review, Boston, MA, 2004
  24. H. Nagai, 'Oxidation of Ni-Cr and Fe-Cr Alloys,' Mater. Sci. Forum, 43 75-130 (1989) https://doi.org/10.4028/www.scientific.net/MSF.43.75
  25. D. P. Karin and A. T. Aldred, 'Localized Level Hopping Transport in $La(Sr)CrO_3$,' Phys. Review B, 20 [6] 2255-63 (1979) https://doi.org/10.1103/PhysRevB.20.2255
  26. Z. Lu, J. Zhu, and R. Careim, 'Compatibility of $MnCr_2O_4$-Based Spinel with Cathode Materials at Elevated Temperatures,' ASM Materials Soultions Conference, Columbus, OH, 2004
  27. W. A. Meulenberg, S. Uhlenbruck, E. Wessel, H. P. Buch-kremer, and D. Stover, 'Oxidation Behaviour of Ferrous Alloys Used as Interconnecting Material in Solid Oxide Fuel Cells,' J. Mater. Sci., 38 507-14 (2003) https://doi.org/10.1023/A:1021879800937
  28. E. Lang, 'The Role of Active Elements in the Oxidation Behavior of High Temperature Metals and Alloys,' Elsevier Applied Science, London, 1989
  29. A. M. Hunts, 'French Research on the Effect of Reactive Elements on the Oxidation Behavior,' Mater. Sci. Forum, Switzerland, 43 131-205 (1989) https://doi.org/10.4028/www.scientific.net/MSF.43.131
  30. P. Choquet, C. Indrigo, and R. Mevrel, 'Microstructure of Oxide Scales Formed on Cyclically Oxidized M-Cr-Al-Y Coatings,' Mater. Sci. Eng., 88 97-101 (1987) https://doi.org/10.1016/0025-5416(87)90072-3

피인용 문헌

  1. The effects of LSM coating on 444 stainless steel as SOFC interconnect vol.22, pp.1-3, 2009, https://doi.org/10.1007/s10832-008-9429-y