DOI QR코드

DOI QR Code

Transient energy flow in ship plate and shell structures under low velocity impact

  • Liu, Z.S. (Computational Solid Mechanics, Institute of High Performance Computing) ;
  • Swaddiwudhipong, S. (Department of Civil Engineering, National University of Singapore) ;
  • Lu, C. (Computational Solid Mechanics, Institute of High Performance Computing) ;
  • Hua, J. (Department of Civil Engineering, National University of Singapore)
  • 투고 : 2004.11.24
  • 심사 : 2005.04.14
  • 발행 : 2005.07.10

초록

Structural members commonly employed in marine and off-shore structures are usually fabricated from plates and shells. Collision of this class of structures is usually modeled as plate and shell structures subjected to dynamic impact loading. The understanding of the dynamic response and energy transmission of the structures subjected to low velocity impact is useful for the efficient design of this type of structures. The transmissions of transient energy flow and dynamic transient response of these structures under low velocity impact are presented in the paper. The structural intensity approach is adopted to study the elastic transient dynamic characteristics of the plate structures under low velocity impact. The nine-node degenerated shell elements are adopted to model both the target and impactor in the dynamic impact response analysis. The structural intensity streamline representation is introduced to interpret energy flow paths for transient dynamic response of the structures. Numerical results, including contact force and transient energy flow vectors as well as structural intensity stream lines, demonstrate the efficiency of the present approach and attenuating impact effects on this type of structures.

키워드

참고문헌

  1. Bouthier, O.M. and Bernhard, R.J. (1995), 'Simple models of the energetics of transversely vibrating plates', J. Sound Vib., 182(1), 149-164 https://doi.org/10.1006/jsvi.1995.0187
  2. Gavric, L. and Pavic, G (1993), 'A finite element method for computation of structural intensity by the normal mode approach', J. Sound Vib., 164(1), 29-43 https://doi.org/10.1006/jsvi.1993.1194
  3. Lee, H.P., Lu, C., Liu, Z.S. and Xu, X.D. (2003), 'The structural intensity analysis of plates under dynamic loading', Proc. 16th Nordic Seminar on Computational Mechanics, Editors K.M. Mathisen, T. Kvamsdal and K.M. Okstad, Trondheim, Norway, 145-148
  4. Liu, Z.S. and Swaddiwudhipong, S. (1997), 'Response of plate and shell structures due to low velocity impact', J of Eng. Mech., ASCE, 123(12), 1230-1237 https://doi.org/10.1061/(ASCE)0733-9399(1997)123:12(1230)
  5. Noiseux, D.U. (1970), 'Measurement of power flow in uniform beams and plates', J. Acoust. Soc. Am., 47, 238-247 https://doi.org/10.1121/1.1911472
  6. Pavic, G. (1976), 'Measurement of structure borne wave intensity, Part I: Formulation of the methods', J. Sound Vib., 49(2), 221-230 https://doi.org/10.1016/0022-460X(76)90498-3
  7. Pavic, G. (1992), 'Vibroacoustical energy flow through straightpipes', J. Sound Vib., 154(3),411-429 https://doi.org/10.1016/0022-460X(92)90776-T
  8. Pedersen, P.T. and Zhang, S. (1998), 'On impact mechanics in ship collisions', Marine Structures, 11,429-449 https://doi.org/10.1016/S0951-8339(99)00002-7
  9. Pedersen, P.T. and Zhang, S. (2000), 'Absorbed energy in collision and grounding revising Minorski's Empirical method', J Ship Res., 44(2), 140-154
  10. Romano, A.J., Abraham, P.B. and Williams, E.G (1990), 'Poynting vector formulation for thin shell and plate and its application to structural intensity and source localization, Part I: Theory', J. Acoust. Soc. Am., 1166-1175
  11. Swaddiwudhipong, S., Koh, C.G and Liu, Z.S. (2002), 'Numerical study of shell structures under low velocity impact', J. Int. Assoc.for Shell and Spatial Struct., 43(140), 159-170
  12. Wang, G, Arita, K. and Liu, D. (2000), 'Behaviour of a double hull in a variety of stranding or collision scenario', Marine Structure, 13, 147-187 https://doi.org/10.1016/S0951-8339(00)00036-8
  13. Wang, G, Ohtsubo, H. and Liu, D. (1997), 'A simple method for predicting the grounding strength of ships', J. Ship Res., 41, 241-247
  14. Williams, E.G (1991), 'Structural intensity in thin cylindrical shells', J. Acoust. Soc. Am., 89, 1615-1622 https://doi.org/10.1121/1.400996
  15. Zhang, Y. and Adin, M. III J. (1996), 'Measuring the structural intensity and force distribution in plate', J. Acoust. Soc. Am., 99(1), 345-353 https://doi.org/10.1121/1.414546

피인용 문헌

  1. A new block assembly method for shipbuilding at sea vol.54, pp.5, 2015, https://doi.org/10.12989/sem.2015.54.5.999
  2. AN INNOVATIVE PROCEDURE FOR ESTIMATING CONTACT FORCE DURING IMPACT vol.06, pp.06, 2014, https://doi.org/10.1142/S1758825114500793
  3. Complex differential quadrature method for two-dimensional potential and plane elastic problems vol.2, pp.1, 2007, https://doi.org/10.1533/saos.2006.0141
  4. Vibration control for slotted plate using structural intensity method vol.07, pp.01n02, 2018, https://doi.org/10.1142/S2047684118500069