Effect of the Projectile and the Air-jet Weaving Machine Characteristics on the Physical Properties of Worsted Fabrics for Garment(I) -Tension Characteristics & Loom Mechanism-

프로젝타일과 에어제트 직기특성이 의류용 모직물 물성에 미치는 영향(I) - 장력특성과 직기 메커니즘 -

  • 김승진 (영남대학교 섬유패션학부) ;
  • 정기진 (영남대학교 섬유패션학부)
  • Received : 2004.07.21
  • Published : 2005.02.28

Abstract

This study surveys the warp and weft tension differences between projectile and air-jet looms and analyses the mechanical properties of worsted fabrics for garment with relation of these loom characteristics using KES-FB system. The paper is divided by two parts. In the 1st paper, the worsted fabric is woven as 5 harness satin weave using 1/40 Nm sirofil worsted warp yarn and 1/30 Nm worsted weft yarn by projectile(Sulzer) and air-jet looms(Picanol PAT and OMNI), respectively. The weavability is also analysed by measuring warp tension variation according to the warp position and weft tension of 3 kinds of looms. The relationship between shed amount and the warp tension is surveyed, and the relationship between end breaks and warp and weft tensions is also discussed.

Keywords

References

  1. 박수현. 김승진. 홍성철 (2000) Air Jet와 Rapier 직기 특성이 모직물의 역학적 특성에 미치는 영향(I). 한국염색가공학회지, 12(6), 1-7
  2. 박수현. 김승진. 홍성철 (2001) Air Jet와 Rapier 직기 특성이 모직물의 역학적 특성에 미치는 영향(II). 한국염색가공학회지, 13(1), 61-67
  3. Blanchonette I. (1996) Tension measurements in weaving of singles worsted wool yarns. Textile Research Journal, 66, 323
  4. Beitelschmidt M. (2000) Simulation of warp and cloth forces in weaving machines. Melliland, 1, E11-E13
  5. Kim S.J. and Yeo G.D. (1999) Fabric weavability and machine efficiency in the various weaving machines such as projectile, rapiers and air-jet. CITC, Brazil
  6. Ruti Te Strake B.U. (1986) The reduction of maximum yarn tension in air-jet filling insertion. Melliland, 7, E8-E11
  7. Weinsdorfer H., Lange A. and Scholze U. (1990) Weft thread tensions on a rapier weaving machine. Melliland. 71, 432-436
  8. Weisdorfer H., Woolfrum J. and Stark U. (1991) The distribution of the warp end tension over the warp width and how it is influenced by the weaving machine settings. Melliland, 11, E360-E363