DOI QR코드

DOI QR Code

A Study on Strength of Plat-Plate Wall-Column Connections

Wall Column을 적용한 플랫플레이트 접합부 강도발현에 관한 연구

  • Lee, Do-Bum (Technology Research Institute. Daelim Industrial Co.) ;
  • Park, Hong-Gun (Dept. of Architectural Engineering, Seoul National University) ;
  • Lee, Li-Hyung (Dept. of Architectural Engineering, Hanyang University)
  • Published : 2006.04.30

Abstract

Flat-plate building systems are utilized extensively for construction of apartments, hotels and office buildings because of short construction period, low floor-to-floor height and flexibility in plan design. Recently, to increase lateral seismic resistance of flat-plate building systems, wall-columns are used frequently. Therefore, to estimate strength of flat-plate column connection accurately, the effect of column section shape on the behavior of flat-plate column connection should be considered properly, In the present study, a numerical analysis was performed for interior connections of continuous flat-plate to analyze the effect of column section shape. For the purpose, a computer program for nonlinear FE analysis was developed, and the validity was verified. Through the parametric study, the variations of shear stress distribution around the connection were investigated. According to the result of numerical analysis, as the length of the cross section of column in the direction of lateral load increases, the effective area and the maximum shear strength providing the torsional resistance decrease considerably. Therefore, these effects should be considered properly to estimate the strength of flat-plate connection accurately.

최근 공기단축, 낮은 층고, 자유로운 평면계획 등의 많은 장점을 가지는 플랫플레이트 구조형식이 고층주거건물의 구조형식으로 많이 사용되고 있다. 특히 국내에서 건설되고 있는 플랫플레이트 구조시스템은 횡력에 대한 저항성을 크게 하기 위하여 기둥의 단면이 매우 크며 직사각형 형태를 가지는 벽기둥(wall-column)을 사용하는 경우가 많으므로 접합부 강도산정모형에서는 이러한 기둥의 형태적 요소를 적절히 반영해야 한다. 기둥단면형상에 따른 플랫플레이트-기둥 접합부의 거동특성을 분석하기 위하여 기존의 강도모델을 검토하고 비선형 유한요소해석을 실시하였다. 기존 강도모델은 위험단면에서의 전단응력분포를 가정함에 있어서 기둥단면형상의 영향을 고려하지 못하여 플랫플레이트-기둥 접합부의 강도를 정확하게 예측하지 못하였다. 비선형 유한요소해석 결과, 하중가력방향과 평행한 기둥폭이 길어질수록 위험단면 측면에서 비틀림 전단을 받는 유효영역과 측면 최대전단강도가 줄어들어 접합부의 강도가 큰 폭으로 감소한다. 따라서 플랫플레이트-기둥 접합부의 강도를 정확히 산정하기 위해서는 하중가력방향과 평행한 기둥폭의 길이($c_1$)이 접합부 거동에 미치는 영향을 적절히 반영해야 할 것이다.

Keywords

References

  1. Hwang, S. J. and Moehle J. P., 'Models for Laterally Loaded Slab-Column Frames', ACI Structural Journal, Vol.97, No.2, Mar.-Apr. 2000, pp.345-353
  2. 최정욱, 송진규, 이수곤, 김진상, '횡하중을 받는 RC 무량판 구조의 슬래브 모델링 기법', 콘크리트학회 논문집, 14권, 4호, 2002, pp.615-622 https://doi.org/10.4334/JKCI.2002.14.4.615
  3. 최경규, '플랫플레이트 기둥 접합부에 대한 파괴기준과 성능기초설계법', 서울대학교 박사학위 논문, 2004
  4. 최경규, 박홍근, '불균등 휨모멘트를 받는 무량판-기둥 접합부의 강도산정모델', 콘크리트학회논문집, 14권, 6호, 2002, pp.961-972
  5. Durrani, A. J., and Du, Y. 'Seismic Response of Slab-Column Connections in Existing Non-Ductile Flat-Plate building', Technical Report. NCEER-92-0010, National Center for Earthquake Engineering Research, SUNY, 1992
  6. Farhey, D. N., Yankelevsky, D. Z., and Adin, Moshe A., 'Resistance Mechanism Model for Reinforced Concrete Flat Slab-Column Frame Connections', ACI Structural Journal, 1997, Vol.94, No.6, pp.653-662
  7. Farhey, D. N., Adin, M. A., and Yankelevsky, D. Z. 'Flat Slab-Column Subassemblages under Lateral Loading', Journal of Structural Engineering, ASCE, 1993, Vol.119, No.6, pp.1903-1916 https://doi.org/10.1061/(ASCE)0733-9445(1993)119:6(1903)
  8. 대한건축학회, '건축물 하중기준 및 해설', 2000
  9. 한국콘크리트학회, 대한건축학회, '콘크리트구조 설계 기준', 1999
  10. ACI, Building Code Requirements for Structural Concrete and Commentary ACI 318-02/318R-02, American Concrete Institute, Detroit, Mich., 2002
  11. CEB-FIP Model Code 1990, Structural Concrete Textbook on Behaviour, Design and Performance Updated Knowledge of the CEB-FIP Model Code 1990, 1993, Lausanne
  12. Luo, Y. H. and Durrani, A. J., 'Equivalent Beam Model for Flat-Slab Buildings-Part1: Interior Connections', ACI Structural Journal, 1995, Vol.92, No.1, pp.115-124
  13. Elstner, R. C. and Hognestad, E., An Investigation of Reinforced Concrete slab Failing in Shear, Mineographed Report, University of Illinois, Department of Theoretical and Applied Mechanics, Mar. 1953
  14. Islam, S. and Park, R. 'Tests on Slab-Column Connections with Shear and Unbalanced Flexure', Journal of Structural Engineering, ASCE, 1976, Vol.102, No.ST3, pp.549-568
  15. Robertson, I. N. and Durrani, A. J., Seismic Response of Connections in Indeterminate Flat-Plate Subassemblies, Structural Research at Rice, Report. No.41, Department of Civil Engineering, Rice University, Houston, 1990
  16. Hanson, N. M. and Hanson, J. M., 'Shear and Moment Transfer Between Concrete Slab and Column', Journal of Portland Cement Association, Research and Development Laboratories, 1968, Vol.10, No.1, pp.2-16
  17. Hawkins, N. M., Mitchell, D., and Sheu, M.S., 'Cycle Behavior of Six Reinforced Concrete Slab-Column Specimens Transferring Moment and Shear', Progress Report 1973-74 on NSF Project GI-3S717, Department of Civil Engineering, University of Washington, Seattle, 1976
  18. Pan, A. D. and Moehle, J. P., 'An Experimental Study of Slab-Column Connections', ACI Structural Journal, 1992, Vol.89, No.6, pp.626-638
  19. Morrison, D. G. and Sozen, M. A., Response of Reinforced Concrete Plate-Column Connections to Dynamic and Static Horizontal Leads, Civil Engineering Studies, Structural Research Series, No. 490, University of illinois, Urbana, 1981
  20. Ghali, A., Elmasri, M. Z., and Diler, W. 'Punching of Flat Plates under Static and Dynamic Horizontal Force', ACI Journal Proceedings, Vol.73, Issue 10. October, 1976, pp.566-572
  21. 이현호, 천영수, 김진수, 이도범, 김욱종, '철근형전단 보강근을 사용한 플랫플레이트 시스템의 이력거동', 한국콘크리트학회 봄 학술발표회논문집, 17권 1호, 2005. 5, pp.56-58
  22. Park, H. and Klingner, R. E., 'Nonlinear Analysis of RC Members Using Plasticity with Multiple Failure Criteria', Journal of Structural Engineering, ASCE, 1997, Vol.123, No.5, pp.643-651 https://doi.org/10.1061/(ASCE)0733-9445(1997)123:5(643)
  23. ACI-ASCE Committee 426, 'The Shear Strength of Reinforced Concrete Members,' Proceedings, ASCE, Vol.100, No.ST8, Aug. 1974, pp.1543-1591