Transactions of Materials Processing (소성∙가공)

The Korean Society for Technology of Plasticity and materials processing (한국소성∙가공학회)
권호 표지
DOI QR코드

DOI QR Code

The Effects of Die Design and Die Series on the Surface Residual Stress of Cold Drawn Eutectoid Steel Wire

고탄소강 와이어의 냉간 인발 시 다이 디자인과 다이 시리즈가 표면 잔류 응력에 미치는 영향

  • 배종구 (포항공과대학교 신소재공학과) ;
  • 양요셉 (포항공과대학교 신소재공학과) ;
  • 반덕영 (고려강선(주) 기술 연구소) ;
  • 박찬경 (포항공과대학교 신소재공학과)
  • Published : 2006.03.01
Download PDF
⟨ Previous Next ⟩

Abstract

In this study, the die design and die series on the surface residual stress of cold drawn eutectoid steel wire have been investigated. Test pieces were fabricated using die series with different mean and final reduction ratios. Surface residual stresses in the axial direction were measured by X-ray diffraction, Bruker's 2-dimensional GADDS system. The results were compared with stress profiles that were calculated by 3D and 2D finite element simulations, ABAQUS 6.4 program in finite element analysis(FEA). By means of the FEA method, optimal die shape considering delta-parameter were induced and applied in order to determine die sequence designs. Balance of the drawing stresses was also introduced to optimize die sequence.

Keywords

References

  1. M. Dollar, I. M. Bernstein, A. W. Thompson, M.Shemenski, 1988, Influence of Deformation Substructure on Flow and Fracture of Fully Pearlitic Steel, Acta Metall., Vol. 36, pp. 311-320 https://doi.org/10.1016/0001-6160(88)90008-9
  2. M. Shemenski, 1999, Wire Drawing by Computer Simulation, Wire J. Int., Vol. 45, pp. 24-33
  3. L. Lazarptto, 1997, Identification of Coulom's Friction Coefficient in Real Contact Conditions Applied to a Wire Drawing Process, Wear, Vol. 221, pp. 54-63
  4. N. Vemlata, P. M. Dixit, G. K .Lal, 1995, Die Design for Asymmetric Extrusion, J. Mater. Proc. Technology, Vol. 55, pp. 331-339 https://doi.org/10.1016/0924-0136(95)02027-6
  5. G. Celano, 2001, The Application of Al Techniques in the Optimal Design of Multi-Pass Cold Drawing Process, J. Mater. Proc. Technology, Vol. 113, pp. 680-685 https://doi.org/10.1016/S0924-0136(01)00686-0
  6. K. Katagri, 1999, Effects of Post-Drawing Treatments on the Fatigue Strength of Eutectoid Steel Wire, Fatigue Fracture Engng. Mater. Struct., Vol. 22, pp. 753-760 https://doi.org/10.1046/j.1460-2695.1999.00212.x
  7. R. N. Wright, 1979, Mechanical Analysis and Die Desing, Wire J. Int., Vol. 25, pp. 47-59

Cited by

  1. Effect of Back Tension in Multi-pass Drawing on the Central Bursting Defect vol.21, pp.5, 2012, https://doi.org/10.5228/KSTP.2012.21.5.291