대한기계학회논문집A (Transactions of the Korean Society of Mechanical Engineers A)

  • 제31권12호
  • /
  • Pages.1188-1193
  • /
  • 2007
  • /
  • 1226-4873(pISSN)
  • /
  • 2288-5226(eISSN)
대한기계학회 (The Korean Society of Mechanical Engineers)
권호 표지
DOI QR코드

DOI QR Code

PEMFC 냉각 시스템의 물부식 방지에 관한 연구

Study on Corrosion Problems in PEMFC Cooling System

  • 박광진 (한국과학기술원 기계공학과) ;
  • 정재화 (한국과학기술원 자동차기술대학원) ;
  • 김정현 (한국과학기술원 기계공학과) ;
  • 배중면 (한국과학기술원 기계공학과)
  • 발행 : 2007.12.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This study focuses on the corrosion problems of STS316(stainless steel 316) tube for the cooling system of PEMFC (Proton Exchange Membrane Fuel Cell) operation. Deionized water which is highly corrosive is used especially for cooling agent of PEMFC to eliminate electrical conductivity, The tensile stress analysis was performed to check the change of mechanical strength of cooling line and pH of the water was monitored for the observation of extent of corrosion at simulated PEMFC operating condition. When STS316 tube was exposed to deionized water for 500 hours, substantial cracks were found on the surface and the pH of water was decreased from 6.8 to 5.8. For prevention of corrosion problems, the STS316 was coated by three kinds of fluororesin such as PTFE, FEP and ETFE. Among the coating materials, PTFE was the most protective in corrosive environment and was maintained the mechanical strength. To lower the cost, the same experimental analyses were carried out for iron tubes and the result will be discussed in detail.

키워드

참고문헌

  1. Gottesfeld. S. and Zawodzinki T., 1997, 'Polymer Electrolyte Fuel Cells,' Adv. Electrochem. Sci. Eng., 5, pp. 195-301 https://doi.org/10.1002/9783527616794.ch4
  2. Park, K., Ji, H. and Bae, J., 2006, 'Study of Operation Strategy for Hybrid PEM Fuel Cell and Supercapacitor,' Trans. of the KSME (B), Vol. 30, No. 8, pp. 756- 763 https://doi.org/10.3795/KSME-B.2006.30.8.756
  3. Gamburzev, S., A.J, A., 2001, 'Recent Progress in Performance Improvement of PEM Fuel Cell,' J. power Sources, 102, pp. 253-629 https://doi.org/10.1016/S0378-7753(01)00808-4
  4. Arita, M., 2002, 'Technical Issues of Fuel Cell Systems for Automative Applications,' Yokosuka, Japan: Nissan Motor Co. Ltd
  5. Chongdar, S., Gunasekaran, G. and Kumar, P., 2005, 'Corrosion Inhibition of Mild Steel by Aerobic Biofilm,' Electrochim. Acta, 50, pp. 4655-4665 https://doi.org/10.1016/j.electacta.2005.02.017
  6. Mohanan, S., Maruthamuthu, S., Venkatachari, G, Palaniswamy, N. and Raghavan, M., 2004, 'Corrosion Inhibition by Freshwater Biofilm on 316 Stainless Steel,' Bull. Electrochem, 20, pp. 129-132
  7. Hakkarainen, T., 2003, 'Microbiologically Influenced Corrosion of Stainless Steels - What is Required for Pitting?' Mater. Corros. 54, pp. 503-509 https://doi.org/10.1002/maco.200390112
  8. Cristobal, A., Arenas, M., Conde, A. and Damborenea, J., 2006, 'Corrosion of Stainless Steels Covered by Exopolymers,' Electrochimica Acta, 52, 2, pp. 546-551 https://doi.org/10.1016/j.electacta.2006.05.045