DOI QR코드

DOI QR Code

Single Cell Stacked Planar Type SOFC Assembled Using a Ag-Current Collector

Ag 집전체를 적용한 평판형 SOFC 단전지

  • Cho, Nam-Ung (Fuel Cell Projet, Research Institute of Industrial Science and Technology(RIST)) ;
  • Hwang, Soon-Cheol (Fuel Cell Projet, Research Institute of Industrial Science and Technology(RIST)) ;
  • Lee, In-Sung (Fuel Cell Projet, Research Institute of Industrial Science and Technology(RIST))
  • 조남웅 (포항산업과학연구원 연료전지연구단) ;
  • 황순철 (포항산업과학연구원 연료전지연구단) ;
  • 이인성 (포항산업과학연구원 연료전지연구단)
  • Published : 2007.12.31

Abstract

Current collectors of SOFC play a significant role on the performance of power generation. In this study a single cell stacked SOFC was assembled using Ag-mesh as a cathode current collector, and evaluated its performance. No gas leakages of the single cell stack occurred in the tests of gas detection and OCV measurement. The OCV and initial power of the stack were 1.09V and $0.45W/cm^2$, respectively, under the flow rates of air at 2,500 cc/min and $H_2$ at 1,000 cc/min at the test temperature of $750^{\circ}C$. A degradation rate of 44.0% was measured during the prolonged time of 307 h. The relatively low durability of the tested single cell stack was found to be the evaporation of Ag-mesh at the current corrector.

Keywords

References

  1. M. Dokiya, 'SOFC System and Technology,' Solid State Ionics, 152-153 383-92 (2002) https://doi.org/10.1016/S0167-2738(02)00345-4
  2. O. Yamamoto, 'Solid Oxide Fuel Cells: Fundamental Aspects and Prospects,' Electrochim. Acta, 45 2423-35 (2000) https://doi.org/10.1016/S0013-4686(00)00330-3
  3. S. P. S. Badwal and K. Foger, 'Solid Oxide Electrolyte Fuel Cell Review,' Ceram. Int., 22 257-65 (1996) https://doi.org/10.1016/0272-8842(95)00101-8
  4. N. Q. Minh, 'Ceramic Fuel Cells,' J. Am. Ceram. Soc., 76 563-88 (1993) https://doi.org/10.1111/j.1151-2916.1993.tb03645.x
  5. K. Kendall, N. Q. Minh, and S. C. Singhal, 'High Temperature and Solid Oxide Fuel Cells: Cell and Stack Designs,' pp. 197-228, Elsevier, 2003
  6. H. Y. Jung, S. H. Choi, H. Kim, J. W. Son, J. Kim, H. W. Lee, and J.-H. Lee, 'Fabrication and Performance Evaluation of 3-cell SOFC Stack Based on Planar 10 cm ${\times}$ 10 cm Anode-supported Cells,' J. Power Sources, 159 [1] 478-83 (2006) https://doi.org/10.1016/j.jpowsour.2005.10.103
  7. H. Yoshida, H. Yakabe, K. Ogasawara, and T. Sakurai, 'Development of Envelope-type Solid Oxide Fuel Cell Stacks,' J. Power Sources, 157 [2] 775-81 (2006) https://doi.org/10.1016/j.jpowsour.2005.12.029
  8. S. Bedogni, S. Campanari, P. Iora, L. Montelatici, and P. Silva, 'Experimental Analysis and Modeling for A Circularplanar Type IT-SOFC,' J. Power Sources, 171 [2] 617-25 (2007) https://doi.org/10.1016/j.jpowsour.2007.07.014
  9. J. Staniforth and K. Kendall, 'Cannock Landfill Gas Powering A Small Tubular Solid Oxide Fuel Cell: A Case Study,' J. Power Sources, 86 [1-2] 401-03 (2000) https://doi.org/10.1016/S0378-7753(99)00417-6
  10. N. Q. Minh, 'Solid Oxide Fuel Cell Technology: Features and Applications,' Solid State Ionics, 174 [1-4] 271-77 (2004) https://doi.org/10.1016/j.ssi.2004.07.042
  11. Y. Yang, G. Wang, H. Zhang, and W. Xia, 'Computational Analysis of Thermo-fluid and Electrochemical Characteristics of MOLB-type SOFC stacks,' J. Power Sources, 173 [1] 233-39 (2007) https://doi.org/10.1016/j.jpowsour.2007.06.070
  12. J. J. Hwang, C. K. Chen, and D. Y. Lai, 'Detailed Characteristic Comparison between Planar and MOLB-type SOFCs,' J. Power Sources, 143 [1-2] 75-83 (2005) https://doi.org/10.1016/j.jpowsour.2004.11.049
  13. J. J. Hwang, C. K. Chen, and D. Y. Lai, 'Computational Analysis of Species Transport and Electrochemical Characteristics of A MOLB-type SOFC,' J. Power Sources, 140 [2] 235-42 (2005) https://doi.org/10.1016/j.jpowsour.2004.08.028
  14. D. E. Alman, C. D. Johnson, W. K. Collins, and P. D. Jablonski, 'The Effect of Cerium Surface Treated Ferritic Stainless Steel Current Collectors on the Performance of Solid Oxide Fuel Cells (SOFC),' J. Power Sources, 168 [2] 351-55 (2007) https://doi.org/10.1016/j.jpowsour.2007.03.035
  15. C. Chervin, R. S. Glass, and S. M. Kauzlarich, 'Chemical Degradation of $La_{1-x}Sr_xMnO_3/Y_2O_3-stabilized\;ZrO_2$ Composite Cathodes in The Presence of Current Collector Pastes,' Solid State Ionics, 176 [1-2] 17-23 (2005) https://doi.org/10.1016/j.ssi.2004.06.004
  16. D. P. Lim, D. S. Lim, J. S. Oh, and I. W. Lyo, 'Influence of Post-treatments on The Contact Resistance of Plasmasprayed $La_{0.8}Sr_{0.2}MnO_3$ Coating on SOFC Metallic Interconnector,' Surface and Coatings Technology, 200 [5-6] 1248-51 (2005) https://doi.org/10.1016/j.surfcoat.2005.08.131
  17. E. Konysheva, J. Laatsch, E. Wessel, F. Tietz, N. Christiansen, L. Singheiser, and K. Hilpert, 'Influence of Different Perovskite Interlayers on The Electrical Conductivity between $La_{0.65}Sr_{0.3}MnO_3$ and Fe/Cr-based Steels,' Solid State Ionics, 177 [9-10] 923-30 (2006) https://doi.org/10.1016/j.ssi.2006.01.046
  18. N. Pryds, B. Toftmann, J. Schou, P. V. Hendriksen, and S. Linderoth, 'Electrical and Structural Properties of $La_{0.8}Sr_{0.2}Mn_{0.5}Co_{0.5}O_{3{\pm}{\delta}}$ Films Produced by Pulsed Laser Deposition,' Applied Surface Science, 247 [1-4] 466-70 (2005) https://doi.org/10.1016/j.apsusc.2005.01.168
  19. Z. Yang, G. Xia, X. Li, and J. W. Stevenson, '$(Mn,Co)_3O_4$ Spinel Coatings on Ferritic Stainless Steels for SOFC Interconnect Applications,' International Journal of Hydrogen Energy, 32 [16] 3648-54 (2007) https://doi.org/10.1016/j.ijhydene.2006.08.048
  20. S. P. Simner, M. D. Anderson, L. R. Pederson, and J. W. Stevenson, 'Performance Variability of $La(Sr)FeO_3$ SOFC Cathode with Pt, Ag, and Au Current collectors,' J. Electrochemical Society, 152 [9] A1851-59 (2005) https://doi.org/10.1149/1.1995687
  21. S. P. Jiang, J. G. Love, and L. Apateanu, 'Effect of Contact between Electrode and Current Collector on The Performance of Solid Oxide Fuel Cells,' Solid State Ionics, 160 [1-2] 15-26 (2003) https://doi.org/10.1016/S0167-2738(03)00127-9
  22. S. P. Simner, M. D. Anderson, J. E. Coleman, and J. W. Stevenson, 'Performance of A Novel $La(Sr)Fe(Co)O_3$-Ag SOFC Cathode,' J. Power Sources, 161 [1] 115-22 (2006) https://doi.org/10.1016/j.jpowsour.2006.04.103
  23. Z. G. Lu and J. H. Zhu, 'Thermal Evaporation of Pure Ag in SOFC-Relevant Environments,' Electrochemical and Solid-State Letters, 10 [10] B179-82 (2007) https://doi.org/10.1149/1.2767433
  24. Q. A. Huang, R. Hui, B. Wang, and J. Zhang, 'A Review of AC Impedance Modeling and Validation in SOFC Diagnosis,' Electrochimica Acta, 52 [28] 8144-64 (2007) https://doi.org/10.1016/j.electacta.2007.05.071

Cited by

  1. Fabrication and Cell Properties of Flattened Tube Segmented-in-Series Solid Oxide Fuel Cell-Stack Using Decalcomania Paper vol.23, pp.3, 2013, https://doi.org/10.3740/MRSK.2013.23.3.206
  2. Membranes According to Yttrium Content vol.50, pp.6, 2013, https://doi.org/10.4191/kcers.2013.50.6.451