Transactions of the Korean Society of Mechanical Engineers A (대한기계학회논문집A)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

Free Vibration Analysis of a Rotating Cantilever Beam by Using Differential Transformation Method

미분변환법을 이용한 회전외팔보의 자유진동해석

  • Published : 2007.03.01
Download PDF
⟨ Previous Next ⟩

Abstract

Rotating cantilever beams can be found in several practical engineering applications such as turbine blades and helicopter rotor blades. For reliable and economic design, it is necessary to estimate the dynamic characteristics of those structures accurately and efficiently since significant variation of dynamic characteristics resulted from rotational motion of the structures. Recently, Differential Transformation Method(DTM) was proposed by Zhou. This method has been applied to fluid dynamics and vibration problems, and has shown accuracy, efficiency and convenience in solving differential equations. The purpose of this study, the free vibration analysis of a rotating cantilever beam, is to seek for the reliable property of DTM and confidence in the results obtained by this method by comparing the results with that of finite element method applied to linear partial differential equations. In particular, this study is worked by supposing optional T-function values because the equations governing chordwise motion are based on two differential equations coupled with each other. This study also shows mode shapes of rotating cantilever beams for various rotating speeds.

Keywords

References

  1. Southwell, R. and Gough, F., 1921, 'The Free Transverse Vibration of Airscrew Blades,' British A.R.C Reports and Memoranda, No. 766
  2. Schilhansl, M., 1958, 'Bending Frequency of a Rotating Cantilever Beam,' ASME Journal of Applied Mechanics, 25, 28-30
  3. Putter, S. and Manor, H., 1980, 'Natural Frequencies of Radial Rotating Beams,' Journal of Sound and Vibration, 56, 175-185 https://doi.org/10.1016/S0022-460X(78)80013-3
  4. Bauer, H., 1980, 'Vibration of a Rotating Uniform Beam,' Journal of Sound and Vibration, 72, 177-189 https://doi.org/10.1016/0022-460X(80)90651-3
  5. Hoa, S., 1979, 'Vibration of a Rotating Beam with Tip Mass,' Journal of Sound and Vibration, 67, 369-381 https://doi.org/10.1016/0022-460X(79)90542-X
  6. Wright, A., Smith, C., Thresher, R. and Wang, J., 1982, 'Vibration Modes of Centrifugally Stiffened Beams,' ASME Journal of Applied Mechanics, 49, 197-202 https://doi.org/10.1115/1.3161966
  7. Bhat, R., 1986, 'Transverse Vibrations of a Rotating Uniform Cantilever Beam Characteristic Orthogonal Polynomials in the Rayleigh-Ritz Method,' Journal Sound and Vibration, 105(2), 199-210 https://doi.org/10.1016/0022-460X(86)90149-5
  8. Chung, J. and Yoo, H. H., 2002, 'Dynamic Analysis of a Rotating Cantilever Beam by Using the Finite Element Method,' Journal of Sound and Vibration, 249(1), 147-164 https://doi.org/10.1006/jsvi.2001.3856
  9. Zhou, J. K., 1986, 'Differential Transformation and Its Applications for Electrical Circuits,' Wuhan China:Huazhong University Press
  10. Chen, C. K. and Ho, S. H., 1996, 'Application of Differential Transformation to Eigenvalue Problem,' Journal Applied Mathematics and Computation, 79, 173-188 https://doi.org/10.1016/0096-3003(95)00253-7
  11. Moinuddin Malik and Dang, H. 1998, 'Vibration analysis of continuous systems by differential transformation,' Applied Mathematics and Computation, 96, 17-26 https://doi.org/10.1016/S0096-3003(97)10076-5
  12. Shin, Y. J. and Yun, J. H., 2006, 'Transverse Vibration of a Uniform Euler-Bernoulli Beam Under Varying Axial Force Using Differential Transformation Method,' Journal of Mechanical Science and Technology (KSME Int. J.), 20(2), pp. 191-196 https://doi.org/10.1007/BF02915820
  13. Shin, Y. J., Jaun, S. J., Yun, J. H., Dioyan, N. M., Hwang, K. S. and Jy, Y. C., 2004, 'Vibration Analysis for the Circular Plates by Using the Differential Transformation Method,' Eleventh International Congress on Sound and Vibration, pp. 3723-3732