Study on the Dynamic Fracture of Rod Impacting on Plate at High Speed

판에 고속 충돌하는 봉의 동적 파괴에 관한 연구

  • 조재웅 (공주대학교 기계.자동차공학부) ;
  • 한문식 (계명대학교 기계.자동차공학부)
  • Published : 2007.08.15

Abstract

This study analyzes the dynamic fracture phenomenon that aluminum rod impacts aluminum plate or rigid plate and deforms. The value of von-Mises stress in the instance that aluminum rod deforms on rigid plate after contact becomes 1.3 times as large as that in the instance of contact. On the contrary, the value of von-Mises stress in the instance that aluminum rod goes through aluminum plate after contact becomes 0.7 times as small as that in the instance of contact. The value of internal energy in the instance that aluminum rod contacts aluminum plate becomes 2.3 times as large as that in the instance that aluminum rod contacts rigid plate. But the value of kinetic energy in the instance that aluminum rod contacts aluminum plate becomes 0.9 times as small as that in the instance that aluminum rod contacts rigid plate. The value of internal energy in the instance that aluminum rod goes through aluminum plate after contact becomes 0.7 times as small as that in the instance that aluminum rod impacts rigid plate and deforms. And the value of sliding energy in the instance that aluminum rod contacts aluminum plate becomes 0.2 times as small as that in the instance that aluminum rod contacts rigid plate. The value of total energy in case that aluminum rod impacts aluminum plate becomes 0.9 times as small as that in the case that aluminum rod impacts rigid plate.

Keywords

References

  1. Jang, I. S. and Chae, D. B., 2000, 'The Derivation of Simplified Vehicle Body Stiffness Equation Using Collision Analysis,' Trans. KSAE, Vol. 8, No. 4, pp. 177-185
  2. Song, J. H., Park, J. M., Chae, H. C., Kang, Y. H. and Yang, S. M., 2002, 'The Estimation of Dynamic Strength Characteristics of High Tensile Steel by Dynamic Lethargy Coefficient,' Trans. KSAE, Vol. 10, No. 2, pp. 96-100
  3. Bergmark, A. and Kao, H. R., 1991, 'Dynamic Crack Initiation in 3PB Ductile Steel Specimens,' Technical Report, LUTFD2 TFHF-3041, Lund Institute of Technology, Sweden, pp. 1-23
  4. LS-DYNA Theoretical Manual, ANSYS Version 10.0, 2005
  5. Barlat, F. and Lian, J., 1989, 'Plastic Behavior and Stretchability of Sheet Metals. Part I: A Yield Function for Orthotropic Sheets Under Plane Stress Conditions,' Int. Journal of Plasticity, Vol. 5, pp. 51-66 https://doi.org/10.1016/0749-6419(89)90019-3
  6. Barlat, F., Lege, D. J. and Brem, J. C., 1991, 'A Six-Component Yield Function for Anistropic Materials,' Int. Journal of Plasticity, Vol. 7, pp. 693-712 https://doi.org/10.1016/0749-6419(91)90052-Z
  7. Hill, R., 1948, 'A Theory of the Yielding and Plastic Flow of Anisotropic Metals,' Proceedings of the Royal Society of London, Series A., Vol. 193, pp. 197-281