한국정밀공학회지 (Journal of the Korean Society for Precision Engineering)

  • 제25권3호
  • /
  • Pages.73-82
  • /
  • 2008
  • /
  • 1225-9071(pISSN)
  • /
  • 2287-8769(eISSN)
한국정밀공학회 (Korean Society for Precision Engineering)
권호 표지

MR 유체를 이용한 연속 감쇠력 가변형 댐퍼를 위한 감쇠유동의 현상학적 모델링과 성능평가

Phenomenological Damping Flow Modeling and Performance Evaluation for a Continuous Damping Control Damper Using MR Fluid

  • 박재우 (경남정보대학 기계자동차산업계열) ;
  • 정영대 (영남대학교 기계공학부)
  • 발행 : 2008.03.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Recently MR CDC damper has been applied to semi-active suspension control system gradually. Compared to former hydraulic CDC damper, it has rapid time response performance as well as simple internal structure and wide range of damping force. In order to develop control logic algorithm which enables to take maximum advantage of unique characteristics of MR CDC damper, it is inevitable to perform a thorough investigation into its nonlinear performance. In many previous researches, MR fluid model was either simply assumed as Bingham Plastic, or a phenomenological model based on experiment was established instead to predict damping performance of MR CDC damper. These experimental flow model which is not based on flow analysis but intentionally built to fit damping characteristics, may lead to totally different results in case of different configuration or structure of MR CDC damper. In this study, a generalized flow formula from mathematical flow model of MR fluid for annular orifice is derived to analyze and predict damping characteristics when current is excited at piston valve.

키워드

참고문헌

  1. Spencer Jr., F., Dyke, J., Sain, K. and Carlson, D., "Phenomenological Model for Magneto-rheological Dampers," Journal of Engineering Mechanics ASCE, Vol. 123, No. 3, pp. 230-238, 1997 https://doi.org/10.1061/(ASCE)0733-9399(1997)123:3(230)
  2. Wereley, N. M. and Pang, L., "Non-dimensional Analysis of Semi-Active Electrorheological and Magnetorheological Dampers using an Approximate Parallel Plate Model," Smart Materials and Structures, Vol. 7, No. 5, pp. 732-743, 1998 https://doi.org/10.1088/0964-1726/7/5/015
  3. Jolly, R., Bender, W. and Carlson, D., "Properties and Application of Commercial Magneto-rheological Fluids," In proceeding of the SPIE Int. Symposium on Smart Materials and Structures, Vol. 3327, pp. 262-275, 1998
  4. Goncalves, D., Koo, J. and Ahmadian, M., "A Review of the State of the Art in Magnetorhelolgical Fluid Technologies-Part I: MR fluid and MR Fluid models," The Shock and Vibration Digest, Vol. 38, No. 3, pp. 203-219, 2006 https://doi.org/10.1177/0583102406065099
  5. Choi, Y., Cho, J., Choi, S. and Wereley, M., "Constitutive Models of Electrorheological and Magnetorheological Fluids using Viscometers," Smart Materials and Structures, Vol. 14, No. 5, pp. 1025-1036, 2005 https://doi.org/10.1088/0964-1726/14/5/041
  6. Lord Materials Div., "Magnetic Circuit Design," Engineering Note, pp. 1-10, 1999
  7. Snyder, A. and Wereley, M., "Characterization of a Magnetorheological Fluid Damper Using a Quasi-Steady Model," Proceeding of the SPIE Conference on Smart Structures and Integrated Systems, Vol. 3668, pp. 507-519, 1999
  8. Gordaninejad, F. and Kelso, P., "Magnetorheological Fluid Shock Absorbers for HMMWV," Proceeding of the SPIE Conference on Smart Materials and Structures, Vol. 3989, pp. 266-275, 2000
  9. Ahmadian, M. and Poynor, C., "An Evaluation of Magnetorheological Dampers for Controling Gun Recoil Dynamics," Shock and Vibration, Vol. 8 No. 3-4, pp. 147-155, 2001 https://doi.org/10.1155/2001/674830
  10. Yang, G., Spencer Jr., F., Carlson, D. and Sain, K., "Large-scale MR Fluid Dampers: Modeling and Dynamic Performance Considerations," Engineering Structures, Vol. 24, No. 3, pp. 309-323, 2002 https://doi.org/10.1016/S0141-0296(01)00097-9
  11. Ellam, J., Bullough, A. and Atkin, J., "Modeling the flow of an Electrostructured Fluid in Transient Operation," Proceeding of the Institution of Mechanical Engineers Part A: Journal of Power and Energy, Vol. 219, No. 1, pp. 61-76, 2004
  12. Rosenfeld, C. and Wereley, M., "Volume -constrained Optimization of Magnetorheological and Electrorheological Valves and Dampers," Smart Materials and Structures, Vol. 13, No. 6, pp. 1303-1313, 2004 https://doi.org/10.1088/0964-1726/13/6/004
  13. Hong, S. and Choi, S., "Bingham Properties and Damping Force Control of an ER Fluid under Squeeze Mode," J. of KSPE, Vol. 19, No. 11, pp. 37-45, 2002
  14. Sung, K, Chung, D. and Choi, S., "Control of Automatic Cargo Handling System Using ER Valves(1) - Modeling of ER Valves -," J. of KSPE, Vol. 18, No. 9, pp. 45-52, 2001