DOI QR코드

DOI QR Code

Seismic design of irregular space steel frames using advanced methods of analysis

  • Vasilopoulos, A.A. (Department of Civil Engineering, University of Patras) ;
  • Bazeos, N. (Department of Civil Engineering, University of Patras) ;
  • Beskos, D.E. (Department of Civil Engineering, University of Patras)
  • 발행 : 2008.02.25

초록

A rational and efficient seismic design methodology for irregular space steel frames using advanced methods of analysis in the framework of Eurocodes 8 and 3 is presented. This design methodology employs an advanced static or dynamic finite element method of analysis that takes into account geometrical and material non-linearities and member and frame imperfections. The inelastic static analysis (pushover) is employed with multimodal load along the height of the building combining the first few modes. The inelastic dynamic method in the time domain is employed with accelerograms taken from real earthquakes scaled so as to be compatible with the elastic design spectrum of Eurocode 8. The design procedure starts with assumed member sections, continues with the checking of the damage and ultimate limit states requirements, the serviceability requirements and ends with the adjustment of member sizes. Thus it can sufficiently capture the limit states of displacements, rotations, strength, stability and damage of the structure and its individual members so that separate member capacity checks through the interaction equations of Eurocode 3 or the usage of the conservative and crude q-factor suggested in Eurocode 8 are not required. Two numerical examples dealing with the seismic design of irregular space steel moment resisting frames are presented to illustrate the proposed method and demonstrate its advantages. The first considers a seven storey geometrically regular frame with in-plan eccentricities, while the second a six storey frame with a setback.

키워드

참고문헌

  1. Al-Ali, A. and Krawinkler, H. (1998), "Effects of vertical irregularities on seismic behavior of building structures", Rept No 130, John A Blume Earthquake Engineering Center, Stanford University, Stanford.
  2. Chambers, J. and Kelly, T. (2004), "Nonlinear dynamic analysis-the only option for irregular structures", In Proc. 13th World Conference on Earthquake Engineering, Vancouver, B.C., Canada, August 1-6, Paper No 1389.
  3. Chandler, A. M., Duan, X. N. and Rutenberg, A. (1996), "Seismic torsional response: assumptions, controversies and research progress", Europ. Earthq. Eng., 10, 37-51.
  4. Chen, W. F. and Kim, S. E. (1997), LRFD Steel Design Using Advanced Analysis, CRC Press, Boca Raton, FL.
  5. Chintanapakdee, C. and Chopra, A. K. (2004), "Seismic response of vertically irregular frames: response history and modal pushover analyses", J. Struct. Eng., ASCE, 130, 1177-1185. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:8(1177)
  6. Chopra, A. K. and Goel, R. K. (2004), "A modal pushover analysis procedure to estimate seismic demands for unsymmetric-plan buildings", Earthq. Eng. Struct. Dyn., 33, 903-927. https://doi.org/10.1002/eqe.380
  7. De La Liera, J. and Chopra, A. K. (1995), "Understanding the inelastic seismic behavior of asymmetric plan buildings", Earthq. Eng. Struct. Dyn., 24, 549-572. https://doi.org/10.1002/eqe.4290240407
  8. EC 3 (Eurocode 3) (1992), Design of Steel Structures, Part 1.1; General Rules for Buildings, European Prestandard ENV 1993-1-1/1992, European Committee for Standardization, Brussels.
  9. EC 8 (Eurocode 8) (2004), Design of Structures for Earthquake Resistance-Part 1: General Rules, Seismic Actions and Rules for Buildings, EN 1998-1:2004, European Committee of Standardization (CEN), Brussels.
  10. Ghobarah, A. (2001), "Performance-based design in earthquake engineering: state of development", Eng. Struct., 23, 878-884. https://doi.org/10.1016/S0141-0296(01)00036-0
  11. Gioncu, V. and Mazzolani F. M. (2002), Ductility of Seismic Resistant Steel Structures, Spon Press, London,
  12. Humar, J. L. and Wright, E. W. (1977), "Earthquake response of steel framed multistorey buildings with setbacks", Earthq. Eng. Struct. Dyn., 6, 15-39.
  13. Kappos, A. J. (2005), (ed.), Proceedings of 4th European Workshop on the Seismic Behaviour of Irregular and Complex Structures, 26-27 August, Thessaloniki, Greece (in CD-ROM format).
  14. Kappos, A. J. and Manafpour A. (2001), "Seismic design of R/C buildings with the aid of advanced analytical techniques", Eng. Struct., 23, 319-332. https://doi.org/10.1016/S0141-0296(00)00052-3
  15. Kappos, A. J. and Panagopoulos G. (2004), "Performance-based seismic design of 3D R/C buildings using inelastic static and dynamic analysis procedures", ISET J. Earthquake Techn., 41, 141-158.
  16. Karabalis, D. L., Cokkinides, G. J., Rizos, D. C., Mulliken, J. S. and Chen, R. (1994), "An interactive computer code for generation of artificial earthquake records", Comput. Civ. Eng. (ASCE), Khozeimech K (ed.), New York, 1122-1155.
  17. Kilar, V. and Fajfar, P. (2001), "On the applicability of pushover analysis to the seismic performance evaluation of asymmetric buildings", Europ. Earthq. Eng., 15, 20-31.
  18. Kim, S. E. and Lee, J. (2002) "Improved refined plastic-hinge analysis accounting for lateral torsional buckling", J. Constr. Steel Res., 58, 1431-1453. https://doi.org/10.1016/S0143-974X(01)00068-2
  19. Marusic, D. and Fajfar, P. (2005), "On the inelastic seismic response of asymmetric buildings under bi-axial excitation", Earthq. Eng. Struct. Dyn., 34, 943-963. https://doi.org/10.1002/eqe.463
  20. Mazzolani, F. M. and Piluso, V. (1996), Theory and Design of Seismic Resistant Steel Frames, First edition, E&FN Spon, London.
  21. NEHRP (1997), Guidelines for the Seismic Rehabilitation of Buildings, FEMA-273, Washington, D.C.
  22. Orbison, J. K. (1982), "Nonlinear static analysis of three-dimensional steel frames", Report No 82-6, Department of Structural Engineering, Cornell University, Ithaca, New York.
  23. Pavlidis, G., Bazeos, N. and Beskos, D. E. (2003), "Effects of higher modes and seismic frequency content on accuracy of pushover analysis of steel frames", In Mazzolani (ed.), Behavior of Steel Structures in Seismic Areas, Proc. 4th Int. Conf. STESSA 2003, Naples, Italy 2003; 547-550, Lisse, Holland: Swets & Zeitlinger.
  24. Perus, I. and Fajfar, P. (2005), "On the inelastic torsional response of single-storey structures under bi-axial excitation", Earthq. Eng. Struct. Dyn., 34, 931-941. https://doi.org/10.1002/eqe.462
  25. Powell, G. H. and Allahabadi, R. (1988), "Seismic damage prediction by deterministic methods: concepts and procedures", Earthq. Eng. Struct. Dyn., 16, 719-734. https://doi.org/10.1002/eqe.4290160507
  26. Prakash, V., Powell, G. H. and Campell, S. (1994), DRAIN-3DX, Base Program Description and User Guide, Version 1.10, Report No UCB/SEMM-94/08, University of California at Berkeley, August.
  27. SAP 2000 (1997), Structural Analysis Program-Inelastic Version 7.44 Computers and Structures Inc., Berkeley, California.
  28. Stathopoulos, K. G. and Anagnostopoulos, S. A. (2003), "Inelastic earthquake response of single-storey asymmetric buildings: an assessment of simplified shear-beam models", Earthq. Eng. Struct. Dyn., 32, 1813-1831. https://doi.org/10.1002/eqe.302
  29. Stathopoulos, K. G. and Anagnostopoulos, S. A. (2005), "Inelastic torsion of multistorey buildings under earthquake excitations", Earthq. Eng. Struct. Dyn., 34, 1449-1465. https://doi.org/10.1002/eqe.486
  30. Tremblay, R. and Poncet, L. (2005), "Seismic performance of concentrically braced steel frames in multistory buildings with mass irregularity", J. Struct. Eng., ASCE 131, 1363-1375. https://doi.org/10.1061/(ASCE)0733-9445(2005)131:9(1363)
  31. Tso, W. K. and Smith, R. S. (1999), "Re-evaluation of seismic torsional provisions", Earthq. Eng. Struct. Dyn., 28, 899-917. https://doi.org/10.1002/(SICI)1096-9845(199908)28:8<899::AID-EQE846>3.0.CO;2-Q
  32. UBC (Uniform Building Code) (1997), International Conference of Building Officials, Whittier, California.
  33. Vasilopoulos, A. A. and Beskos, D. E. (2005), "seismic design of irregular space steel structures using advanced methods of analysis", Report No 7, Group of Analysis and Design of Steel Structures, Department of Civil Engineering, University of Patras, Patras, Greece, November.
  34. Vasilopoulos, A. A. and Beskos, D. E. (2006 & 2007), "Seismic design of plane steel frames using advanced methods of analysis", Soil Dyn. Earthq. Eng., 2006; 26: 1077-1100 & Corrigendum, 2007; 27: 189.
  35. Vasilopoulos, A. A. and Beskos. D. E. (2008), "Seismic design of space steel frames using advanced methods of analysis", Soil Dyn. Earthq. Eng., in press.

피인용 문헌

  1. Role of accidental torsion in seismic reliability assessment for steel buildings vol.9, pp.5, 2009, https://doi.org/10.12989/scs.2009.9.5.457
  2. Seismic analysis of high-rise steel frame building considering irregularities in plan and elevation vol.39, pp.1, 2008, https://doi.org/10.12989/scs.2021.39.1.065