A Study on the Precipitation Behavior of $Al_2Ti$ Phase in $L1_0$-TiAl and $L1_2-(Al,Cr)_3Ti$

$L1_0$-TiAl 및 $L1_2-(Al,Cr)_3Ti$ 중에 $Al_2Ti$상의 석출거동에 관한 연구

  • Han, Chang-Suk (Dept. of Defense Science & Technology, Hoseo University)
  • 한창석 (호서대학교 국방과학기술학과)
  • Received : 2007.12.03
  • Accepted : 2008.01.14
  • Published : 2008.01.31

Abstract

Structural studies have been performed on precipitation hardening and microstructural variations found in Ti-Al-Cr ternary $L1_0$- and $L1_2$-phase alloys using transmission electron microscopy. Both the $L1_0$ and $L1_2$ phase alloys harden by aging at 973 K after solution annealing at higher temperatures. The amount of age hardening of the $L1_2$ phase alloy is larger than that of the $L1_0$ phase alloy. The phase separation between $L1_0$ and $L1_2$ phase have not been observed by aging at 973 K. But $Al_2Ti$ was formed in each matrix alloy during aging. The crystal structure of the $Al_2Ti$ phase is a $Ga_2Zr$ type in the $L1_0$ and a $Ga_2Hf$ type in the $L1_2$ phase, respectively. At the beginning of aging the fine coherent cuboidal $Al_2Ti$-phase are formed in the $L1_0$ phase. By further aging, two variants of $Al_2Ti$ precipitates grow along the two {110} habit planes. On the other hand, in the $L1_2$ phase, the $Al_2Ti$ phase forms on the {100} planes of the $L1_2$ matrix lattice. After prolonged aging the precipitates are rearranged along a preferential direction of the matrix lattice and form a domain consisting of only one variant. It is suggested that the precipitation of $Al_2Ti$ in each matrix alloy occurs to form a morphology which efficiently relaxes the elastic strain between precipitate and matrix lattices.

Keywords

References

  1. M. Yamaguchi and H. Inui : Structural Intermetallics, Metals & Materials Society, (1993) 127
  2. D. M. Dimiduk, P. M. Hazzledine, T. A. Parthasarathy, S. Seshagiri and M. G. Mendiratta : Metall. Mater. Trans. A, 29A (1998) 37
  3. P. J. Maziasz and C. T. Liu : Metall. Mater. Trans. A, 29A (1998) 105
  4. K. S. Kumar : Structural Intermetallics, Metals & Materials Society, (1993) 87
  5. M. Palm and G. Inden : Structural Intermetallics 1997, Metals & Materials Society, (1997) 859
  6. T. J. Jewett, B. Ahrens and M. Dahms : Intermetallics, 4 (1996) 543 https://doi.org/10.1016/0966-9795(96)00044-1
  7. F. Stein, L. C. Zhang, G. Sauthoff and M. Palm : Acta Materialia, 49 (2001) 2919 https://doi.org/10.1016/S1359-6454(01)00208-7
  8. T. Nakano, A. Negishi, K. Hayashi and Y. Umakoshi : Acta Materialia, 47 (1999) 1091 https://doi.org/10.1016/S1359-6454(99)00009-9
  9. L. Potez, A. Loiseau, S. Naka and G. Lapasset : J. Mater. Res., 7 (1992) 876 https://doi.org/10.1557/JMR.1992.0876
  10. K. Rzyman, Z. Moser and J. C. Gachon : Archives of Metallurgy, 49 (2004) 545
  11. Z. L. Wu and D. P. Pope : Acta Metall. Mater., 42 (1994) 509 https://doi.org/10.1016/0956-7151(94)90505-3