Journal of the Korea Academia-Industrial cooperation Society (한국산학기술학회논문지)

The Korea Academia-Industrial cooperation Society (한국산학기술학회)
권호 표지
DOI QR코드

DOI QR Code

The Expectation for Material Properties of Microstructure by Application of Dynamic Response Characteristics

동적 응답 특성을 활용한 미세구조의 물성 분포에 대한 예측

  • Lee, Jeong-Ick (Dept. of Mechanical Design., Inha Techinical College) ;
  • Yeo, Moon-Su (Dept. of Automotive Eng., Inha Technical College)
  • Published : 2008.06.30
Download PDF
⟨ Previous Next ⟩

Abstract

This paper addresses the prediction of the material property continuities of a microstructure. Prediction was made by measuring the dynamic responses distribution of the fabricated materials used in the microstructures. When these distributional material properties were used in estimating the mechanical performances of microstructures, the differences between the computer simulation and the experimental result of microstructures could be reduced and their reliability design could be made.

본 연구는 재료 특성에 있어 미세구조의 연속성을 예측한 것이다. 예측은 미세구조에서 사용되는 제작 재료의 동적 응답 분포를 측정해서 만들어졌다. 분포되는 재료 특성들이 미세구조의 기계적 성능을 평가하는데 사용될 때, 미세구조에 대한 컴퓨터 시뮬레이션과 실험결과의 차이를 줄일 수 있고 신뢰성 설계가 이루어질 수 있다.

Keywords

References

  1. Lee, D. C. (2005), "A compensation of Young's modulus in polysilicon structure with discontinuous material distribution", Material Letters, Vol. 59, No. 29, pp. 3900-3903. https://doi.org/10.1016/j.matlet.2005.07.040
  2. Sharpe, W. N. Jr. Yuan, B. Jr. and Edwards R. L.(1997), "A new technique for measuring the mechanical properties of thin films", Journal of Microelectromechanical systems, Vol. 6, No. 3, pp. 193-198. https://doi.org/10.1109/84.623107
  3. Osterberg, P. M. and Senturia, S. D.(1997), "M-test; A test chip for MEMS material property measurement using electrostatically actuated test structures", Journal of Microelectromechanical systems, Vol. 6, No. 2, pp.107-118. https://doi.org/10.1109/84.585788
  4. Bendsoe, M. P. and Kikuchi, N.(1988), "Generating optimal topologies in structural design using a homogenization method", Computer Methods in Applied Mechanics & Engineering, Vol. 71, pp. 197-244. https://doi.org/10.1016/0045-7825(88)90086-2
  5. Bendsoe, M. P.(1989), "Optimal shape design as a material distribution problem", Structural Optimization, Vol. 1, pp.193-202. https://doi.org/10.1007/BF01650949
  6. Ansel, C. U. and Saul, K. F.(1995), "Advanced strength and applied elasticity" (Prentice-Hall, New Jersey,) 3rd ed.
  7. Rice, R. W.(1998), Porosity of Ceramics Marcel Dekker(New York).
  8. Haglund, J. A. and Hunter, O. Jr.(1973), "Elastic properties of polycrystalline monoclinic Gd2O3", Journal of the American Ceramic Society, Vol.56, No. 6, pp.327-330. https://doi.org/10.1111/j.1151-2916.1973.tb12506.x
  9. Hasselman, D. P. H.(1962), "On the porosity dependence of the elastic moduli of polycrystalline refractory materials", Journal of the American Ceramic Society, Vol. 45, pp.452-453. https://doi.org/10.1111/j.1151-2916.1962.tb11191.x
  10. Roy, G. C. Jr.(1981), "Structural dynamics : An introduction to computer methods", John Wiley & Sons(New York).
  11. Shabana, A. A.(1991), "Theory of vibration Volume II : Discrete and continuous systems", Springer-Verlag(New York ).
  12. Rao, S. S.(1990), "Mechanical vibrations", 2nd edition, Addison-Wesley(New York).