Journal of the Korean Ceramic Society (한국세라믹학회지)

The Korean Ceramic Society (한국세라믹학회)
권호 표지
DOI QR코드

DOI QR Code

Fabrication of Alumina Suspension for Coating of BLU(Back Light Units) and Fluorescent Substances

BLU 및 형광체 코딩용 알루미나 분산액의 제조 및 평가

  • Yu, Jeong-Hwan (Department of Materials Science and Engineering of Kyungnam University) ;
  • Jung, Seung-Hwa (Component Materials Research Institute, Cenotec Co. Ltd.) ;
  • Hong, Gyung-Pyo (Component Materials Research Institute, Cenotec Co. Ltd.) ;
  • Mun, Jong-Soo (Department of Materials Science and Engineering of Kyungnam University) ;
  • Kang, Jong-Bong (Department of Materials Science and Engineering of Kyungnam University)
  • 유정환 (경남대학교 대학원 재료공학과) ;
  • 정승화 ((주) 쎄노텍 부설 부품소재개발 연구소) ;
  • 홍경표 ((주) 쎄노텍 부설 부품소재개발 연구소) ;
  • 문종수 (경남대학교 대학원 재료공학과) ;
  • 강종봉 (경남대학교 대학원 재료공학과)
  • Published : 2009.01.31
Download PDF
⟨ Previous Next ⟩

Abstract

The suspension of $Al_2O_3$ which has long-term stability was made by mechanical milling. Thin films were evaluated and made to use as coating materials. A particle size of the suspension manufactured was 98 nm when 2 mt% nitric acid was added. It indicated that viscosity of the suspension is 12 cps and that it had the long-term stability. Thickness which was from 200 nm to 600 nm of the thin films was able to be made by adjusting draw rate and organic additive. Cracks of thin films at room temperature were prevented by adding Ethyl cellulose from 0.5 wt% to 2 wt%. The thin film heated at $500^{\circ}C$ indicated a hydrophilic property against water and an excellent permeability against a visible ray.

Keywords

References

  1. J. K. Lee, J. O. Kim, Y. H. Beak, J. S. Lee, B. H. Lee, and D. W. Sin, “Ceramics Raw Materials(in Korean),” p. 82, Pearson Education Korea, Seoul, 2000.
  2. S. Sakka, “Preventive Glass Against Reflection, in New Glass,” p. 98, DAILY ISSUE INDUSTRY SINGESA, Seoul, 1990.
  3. C. J. Brinker, “Sol-Gel Derived AR Coatings for Silicon,” Sol. Ener. Mat., 5 159 1981). https://doi.org/10.1016/0165-1633(81)90027-7
  4. Y. Asahara and T. Izumitani, “The Properties of Gradient Index Antireflection Layer on the Phase Separable Glass,” J. Non-Crystalline Solids, 42 269 (1982). https://doi.org/10.1016/0022-3093(80)90028-9
  5. J. T. Cox and G. Hass, “Antireflection Coating for Optical and Infrared Optical Materials,” p. 239 in Physics of thin films, Vol. 2 Academic Press, London, 1964.
  6. B. S. Yu and O. S. Kim, “Development of AR coating glass by Sputtering methods(in Korean),” Glass symposium, 7 81 (1992).
  7. J. H. Lee and S. Y. Choi, “Preparation and Characterization of Alumina Thin Film by Sol-Gel method (II); Synthesis of Alumina Sol for Coating and Preparation of Coating Films(in Korean),” J. Kor. Ceram. Soc., 31 [8] 911-19 (1994).
  8. K. W. Kang, Y. S. Chung, B. S. Hyun, and K. H. Auh, “A Study on the Preparation of ${\alpha}-Fe_2O_3$ Films by Dip-coating Method(in Korean),” J. Crystal, Growth, 8 [2] 292-98 (1998).
  9. B. H. Kim, K. H. Cho, and H. Y. Cho, “Preparation of Ferroelectric PZT Thin Film by Sol-Gel Processing ;(I) Synthesis of Stable PZT Sol Using Cheating Agent and Preparation of Its Thin Film(in Korean),” J. Kor. Ceram. Soc., 31 [7] 804-12 (1994).

Cited by

  1. Correlation Research of Dispersion Factors on the Silica Sol Prepared from Fumed Silica vol.26, pp.3, 2016, https://doi.org/10.3740/MRSK.2016.26.3.136