한국정밀공학회지 (Journal of the Korean Society for Precision Engineering)

  • 제26권3호
  • /
  • Pages.113-121
  • /
  • 2009
  • /
  • 1225-9071(pISSN)
  • /
  • 2287-8769(eISSN)
한국정밀공학회 (Korean Society for Precision Engineering)
권호 표지

전자레인지 포장품의 클램핑 해석 및 설계

Clamping Analysis and Design of a Package of a Microwave Oven

  • 이부윤 (계명대학교 기계자동차공학부) ;
  • 손병삼 (계명대학교 대학원 기계공학과)
  • Lee, Boo-Youn (School of Mechanical & Automotive Engineering, Keimyung Univ.) ;
  • Son, Byung-Sam (Department of Mechanical Engineering, Graduate School, Keimyung Univ.)
  • 발행 : 2009.03.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Behavior of a package of a microwave oven under the clamping condition is evaluated by tests and the finite element analyses. PAM-CRASH software is used for the finite element analyses. Results of the analyses are compared with those of the tests and accuracy is shown to be favorable. Under the clamping condition of the original design, severe deformation occurs and an improved design of the outer case and upper EPS(Expandable Poly Styrene) is proposed to reduce it. Face beads of the outer case are introduced and shape of the upper EPS is modified to reduce the deformation resulting from the clamping load. The improved design model is analyzed and its deformation is shown to be satisfactory. A prototype is produced according to the improved design and tests are performed. Results of the clamping test of the prototype show that the plastic deformation is removed totally.

키워드

참고문헌

  1. ASTM D642, 'Standard Test method for determining compressive resistance of shipping containers, components, and unit loads,' American Society for Testing and Materials
  2. ISTA Procedure 2A, 'Packaged-Products Weighing 150 lb(68kg) or Less,' International Safe Transit Association
  3. Kim, C. S., Na, J. M., Kim, J. H. and Chung, H. S., "Drop Analysis of Micro Wave Machine with IDEAS and LS-DYNA," Technical Paper, Samsung Electronics, 2001
  4. LS-DYNA3D, "Keyword User's Manual," LSTC 1999
  5. Cho, W. J., Kim, H., Lee, C. S. and Lee, D. R., "Drop-Impact Simulation of Micro Wave Oven," HANPAM 2000 Users Conference in Korea, pp. 61- 67, 2000
  6. Noh, K. C., "A Study on the Door Interlock and the Door Opening Force of a Microwave Oven," Dept. of Intelligent Machinery System, M. S. Thesis, Busan University, 1999
  7. Lee, B. Y. and Koo, J. Y., "Evaluation of Twisting Deformation of the Door Frame of a Microwave Oven by Transient Response Analysis," Trans. of the KSME (A), Vol. 29, No. 9, pp. 1282-1288, 2005 https://doi.org/10.3795/KSME-A.2005.29.9.1282
  8. Lee, B. Y. and Koo, J. Y., "Analysis of Twisting Deformation and Structural Design of the Door Frame of a Microwave Oven to Decrease Leakage of Microwave," J. of KSPE, Vol. 22, No. 12, pp. 141- 148, 2005
  9. Lee, B. Y., Koo, J. Y. and Kim, W. J., "Structural Design of the Door Frame of a Microwave Oven to Decrease Its Twisting Deformation Using Dynamic Analysis," J. of KSPE, Vol. 23, No. 8, pp. 145-153, 2006
  10. Lee, B. Y. and Koo, J. Y., "Shape Optimal Design of the Door Frame of a Microwave Oven to Minimize Its Twisting Deformation," Trans. of the KSME (A),Vol. 30, No. 8, pp. 1016-1023, 2006 https://doi.org/10.3795/KSME-A.2006.30.8.1016
  11. Lee, B. Y., Koo, J. Y. and Kim, W. J., "Shape Optimal Design to Minimize Dynamic Twisting Deformation of the Door Frame of a Microwave Oven," Trans. of the KSME (A), Vol. 30, No. 11, pp. 1479-1485, 2006 https://doi.org/10.3795/KSME-A.2006.30.11.1479
  12. KS A 1513, Korean Standards Association, 1996
  13. PAM-SYSTEM, "Reference Manual," PAM System International, 2002
  14. CATIA V5, "Online Help Manual," Dassault Systems, 2003
  15. MSC PATRAN, "Reference Manual," MSC Software, 2003