한국강구조학회 논문집 (Journal of Korean Society of Steel Construction)

  • 제21권6호
  • /
  • Pages.627-636
  • /
  • 2009
  • /
  • 1226-363X(pISSN)
  • /
  • 2287-4054(eISSN)
한국강구조학회 (Korean Society of Steel Construction)
권호 표지

하중증폭계수를 적용한 비가새 골조 2차 해석 평가

Evaluation of the Second Order Analysis of Unbraced Frame by using load amplification factor

  • 투고 : 2009.09.07
  • 심사 : 2009.10.14
  • 발행 : 2009.12.27
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

본 연구는 강구조 설계기준에서 제시하고 있는 하중증폭계수를 적용한 2차 해석법의 타당성을 해석적 방법을 통해 평가하는데 그 목적이 있다. 이를 위해 KBC 2005에서 제안하고 있는 B1 및 B2 계수를 적용한 2차 해석과 KBC 2009(안)에서 제안하고 있는 하중증폭계수를 적용한 직접해석을 3층 1스팬 및 5층 3스팬 비가새 강구조 골조에 대해 실시하고, 그 해석 결과를 2차 비선형 해석 결과와 비교하여 기준에서 제안된 2차 해석법들을 평가하였다. 해석의 주요 변수로는 골조의 규모, 기둥의 축력비, 해석방법 등이 적용되었다. 연구 결과 고축력 조건시 KBC 2005에서 제안된 하중증폭계수를 적용한 2차 해석은 2차 효과의 영향을 적절하게 고려하지 못하나 KBC 2009(안)에서 제안된 직접해석법의 경우 적절한 수준에서 2차 효과를 고려하고 있는 것으로 나타났다.

The purpose of this study was to evaluate the validity of the second-order analysis using the load amplification factor suggested by design codes. For this purpose, the first-order analysis with the B1 and B2 factors suggested by KBC 2005 and the direct analysis with the load amplification factor suggested by KBC 2009 (draft) were performed for three-story -one-bay and five-story-three-bay unbraced steel frames. The results of the analyses were compared with the results of the second-order inelastic analysis to evaluate the validity of the suggested methods. The main parameters of the analysis were the scale of the frame, the axial load ratio of the column, and the methods of analysis. The research results showedthat the method suggested by KBC 2005 does not properly consider the second-order effect under the high axial load ratio, but the direct analysis method suggested by KBC 2009 (draft) properly estimates the second-order effect without any serious problem.

키워드

참고문헌

  1. 대한건축학회 (2005) 건설교통부고시 건축구조설계기준, 대한건축학회
  2. 대한건축학회 (2009) 건축구조설계기준(안), 대한건축학회
  3. Carter, C. J. and Geschwindner, L. F. (2006) A comparisonof frame stability analysis methods in ANSI/AISC360-05, ASCE
  4. Chen, W. F. and Sohal, I. (1995), Plastic Design and Second-order Analysis of Steel Frames, Springer-Verlag, USA
  5. Galambos, T. V. (1968), Structural Members and Frames, Prentice Hall, USA
  6. Galambos, T. V. (1998), Guide to the Stability Design Criteria for Metal Structures, 5th Edition, John Wiley & Sons, Inc., USA
  7. Kim, H. D. and Lee, M. J. (2002), The Influence of the P-$\Delta$ Effects on the Behavior of Unbraced Frames, Proc. International Symposium on of Steel Structures, KSSC, Korea, pp.333-344
  8. Kim, H. D. and Lee, M. J. (2009). Experimental Investigation of the P-$\Delta$ Effect and Factor B2 of Low-rise Unbraced Steel Frames, International Journal of Steel Structures,Vol. 9, No. 2, pp.131-141 https://doi.org/10.1007/BF03249488
  9. Kim, S. E. and Chen, W. F. (1998). LRFD Steel Design Using Advanced Analysis, CRC Press, USA
  10. LeMessurier, W. J. (1972). A Practical Method of Second order Analysis (Part 2: Rigid Frames). Engineering Journal, AISC, Vol. 14, No. 2, pp.89-96
  11. Surovek-Maleck, A. E. and White, D. W. (2004) Alternative approaches for elastic analysis and design of steel frames. I:Overview, Journal of structural engineering, ASCE, pp.1186-1196 https://doi.org/10.1061/(ASCE)0733-9445(2004)130:8(1186)
  12. Surovek-Maleck, A. E. and White, D. W., (2004) Alternative approaches for elastic analysis anddesign of steel frames. II: Verification studies, Journal of structural engineering, ASCE, pp.1197-1205 https://doi.org/10.1061/(ASCE)0733-9445(2004)130:8(1197)
  13. Surovek-Maleck, A. E. and Ziemian, R. D. (2005) The direct analysis method : Bridging the gap from linear elastic analysis to advanced analysis in steel frame design, ASCE https://doi.org/10.1061/40753(171)117
  14. White, D. W., Surovek-Maleck, A. E., Alemdar, B. N., Chang, C. J., Kim, Y. D. and Kuchenbecker, G. H.(2006) Stability analysis and design of steel building frames using the 2005 AISC specification, International Journal of Steel Structures, Vol. 5,No. 2, pp.71-91 https://doi.org/10.12989/scs.2005.5.1.071
  15. Yura, J. A. (1971). The Effective Length of Columns in Unbraced Frames. Engineering Journal, AISC, Vol.8, No. 2, pp.37-42