Analysis of the Propagation Characteristics of Ultrasonic Guided Waves Excited by Single Frequency and Broadband Sources

  • Kang, To (School of Mechanical Engineering, Sungkyunkwan University) ;
  • Song, Sung-Jin (School of Mechanical Engineering, Sungkyunkwan University) ;
  • Kim, Hak-Joon (School of Mechanical Engineering, Sungkyunkwan University) ;
  • Cho, Young-Do (System Research Team, Institute of Gas Safety R&D, Korea Gas Safety Corporation) ;
  • Lee, Dong-Hoon (System Research Team, Institute of Gas Safety R&D, Korea Gas Safety Corporation) ;
  • Cho, Hyun-Joon (Advanced Institute of Quality and Safety)
  • Published : 2009.12.30

Abstract

Excitation and propagation of guided waves are very complex problems in pipes due to their dispersive nature. Pipes are commonly used in the oil, chemical or nuclear industry and hence must be inspected regularly to ensure continued safe operation. The normal mode expansion(NME) method is given for the amplitude with which any propagating waveguide mode is generated in the pipes by applied surface tractions. Numerical results are calculated based on the NME method using different sources, i.e., non-axisymmetric partial loading and quasi-axisymmetric loading sources. The sum of amplitude coefficients for 0~nineth order of the harmonic modes are calculated based on the NME method and the dispersion curves in pipes. The superimposed total field which is namely the angular profile, varies with propagating distance and circumferential angle. This angular profile of guided waves provides information for setting the transducer position to find defects in pipes.

Keywords

References

  1. Alleyen, D. N. and Cawley, P. (1997) Long Range Propagation of Lamb Waves in Chemical Plant Pipework, Materials Evaluation, Vol. 55, No. 4, pp. 504-508
  2. Alleyne, D. N., Pavlakovic, B., Lowe, M. J. S. and Cawley, P. (2002) The Use of Guided Wave for Rapid Screening of Chemical Plant Pipework, Journal of the Korean Society for Nondestructive Testing, Vol. 22, No. 6, pp. 589-598
  3. Ditri, J. J. and Rose, J. L. (1992) Excitation of Guided Wave Modes in Hollow Cylinders by Applied Tractions, Journal of Applied Physics, Vol. 72, No. 1, pp. 2589- 2597 https://doi.org/10.1063/1.351558
  4. Gazis, D. C. (1959) Three-Dimensional Investigation of the Propagation of Waves in Hollow Circular Cylinders. I. Analytical Foundation, Journal of Acoustical Society of America, Vol. 31, No. 5, pp. 568-573 https://doi.org/10.1121/1.1907753
  5. Kang, T., Kim, H. -J., Song, S. -J., Cho, Y. -D., Lee, D. H. and Cho, H. -J. (2009) A Study on Techniques for Focusing Circumferential Array Guided Waves for Long Range Inspection of Pipes, Journal of the Korean Society for Nondestructive Testing, Vol. 29, No. 2, pp. 114-121
  6. Kwun, H., Kim, S.-Y. and Light, G. M. (2001) Long-Range Guided Wave Inspection of Structures Using the Magnetostrictive Sensor, Journal of the Korean Society for Nondestructive Testing, Vol. 21, No. 4, pp. 383-390
  7. Li, J. and Rose, J. L. (2001) Excitation and Propagation of Non-Axisymmetric Guided Waves in a Hollow Cylinder, Journal of Acoustical Society of America, Vol. 109, No. 2, pp. 457-464 https://doi.org/10.1121/1.1315290
  8. Li, J. and Rose, J. L. (2002) Angular-Profile Tuning of Guided Waves in Hollow Cylinders Using a Circumferential Phased Array, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control, Vol. 49, No. 12, pp. 1720-1729 https://doi.org/10.1109/TUFFC.2002.1159849
  9. Rose, J. L., Ditri, J. J., Pilarski, A., Rajana, K. and Carr, F. (1994) A Guided Wave Inspection Technique for Nuclear Steam Generator Tubing, NDT & E International, Vol. 27, No. 6, pp. 307-310 https://doi.org/10.1016/0963-8695(94)90211-9
  10. Shin, H. J. (1997) Non-Axisymmetric Ultrasonic Guided Waves for Tubing Inspection, Ph. D. Thesis in Engineering Science and Mechanics, The Pennsylvania State University
  11. Shin,, H. J., Rose, J. L. and Song, S.-J. (2000) Inspection of Heat Exchanger Tubing Defects with Ultrasonic Guided Waves, Journal of the Korean Society for Nondestructive Testing, Vol. 20, No. 1, pp. 1-9
  12. Shivaraj, K., Balasubramaniam, K., Krishnamurthy, C. V. and Wadhwan, R. (2008) Ultrasonic Circumferential Guided Wave for Pitting-Type Corrosion Imaging at Inaccessible Pipe-Support Locations, Journal of Pressure Vessel Technology, Transactions of the ASME, Vol. 130, No. 2, pp. 0215021-12150211
  13. Song, S.-J., Kim, Y. H., Lee, D.-H., Lee, H.-D., Bae, C.-H and Park, J.-H (2003) A Study of the Guided Wave Propagation in the Wear Supplying Pipes with Scale, Journal of the Korean Society for Nondestructive Testing, Vol. 23, No. 1, pp. 1-6