The Study of Color and Hardness of TiN Thin Film by UBM Sputtering System

UBM Sputtering System에 의한 TiN막의 색상과 경도에 관한 연구

  • Park, Moon Chan (Department of Ophthalmic Optics, Shinheung College) ;
  • Lee, Jong Geun (Department of Digital Information Electronics, Bucheon College) ;
  • Joo, Kyung Bok (Department of Ophthalmic Optics, Chodang University)
  • 박문찬 (신흥대학 안경광학과) ;
  • 이종근 (부천대학 디지털정보전자과) ;
  • 주경복 (초당대학교 안경광학과)
  • Received : 2009.01.25
  • Accepted : 2009.03.06
  • Published : 2009.03.31

Abstract

Purpose: TiN films were deposited on sus304 by unbalanced magnetron sputtering system which was designed and developed as unbalancing the strength of the magnets in the magnetron electrode. The color and hardness of deposited TiN films was investigated. Methods: The cross sections of deposited films on silicon wafer were observed by SEM to measure the thickness of the films, the components of the surface of the films were identified by XPS, the components of the inner parts of the films were observed by XPS depth profiling. XPS high resolution scans and curve fittings of deposited films were performed for quantitative chemical analysis, Vickers micro hardness measurements of deposited films were performed with a nano indenter equipment. Results: The colors of deposited films gradually changed from light gold to dark gold, light violet, and indigo color with increasing of the thickness. It could be seen that the color change come from the composite change of three compound,$TiO_{x}N_{y}$, $TiO_2$, TiN. Especially, the composite change of$TiO_{x}N_{y}$ compound was thought to affect the color change with respect to thickness. Conclusions: Deposited films had lower than the value of general TiN film in Vickers hardness, which was caused by mixing three TiN, $TiO_2$,$TiO_{x}N_{y}$ compound in the deposited films. The increasing and decreasing of micro hardness with respect to thickness was thought to have something to do with the composite of TiN in the films.

목적: Magnetron의 세기를 비대칭으로 한 unbalanced magnetron sputtering 장치를 설계 제작하고 sus304시편 위에 TiN박막을 증착하여 색상과 경도에 관한 연구를 하고자 한다. 방법: 증착된 박막표면의 화학조성을 양적으로 분석하기 위하여 XPS high resolution scan과 curve fitting을 수행하였으며, 박막 표면의 경도를 측정하기 위해 nano indentation 장비를 이용하였다. 결과: 박막 두께가 두꺼워지면 박막의 색상은 처음에는 연한 금색, 시간이 지남에 따라 어두운 금색, 연보라, 남색으로 바뀌었다. 두께에 따른 박막의 색상변화는 박막에$TiO_{x}N_{y}$, $TiO_2$, TiN과 같은 세가지 화합물의 조성변화에 기인함을 알 수 있었으며,$ TiO_{x}N_{y}$의 조성변화가 두께에 따른 색상변화에 가장 큰 영향을 미치는 것을 여겨졌다. 결론: TiN박막의 비커스 경도가 TiN의 일반적인 경도보다 수치가 작은 것은 박막이 TiN, $TiO_2$,$TiO_{x}N_{y}$ 세가지 물질 섞여 있기 때문이라고 여겨지며, 두께에 따른 박막의 경도가 점점 커지다가 줄어드는 것은 두께에 따른 TiN 양과 밀접한 관계가 있음을 알 수 있었다.

Keywords

References

  1. 강현식, "안경재료학", 신광출판사, 서울, pp. 231-244(2005).
  2. 김선규, "표면공학", 두양사, pp. 295-332(2003).
  3. Mattox D. M., "Design consideration for ion plating" Sendia. Corp. Report. No. SC-R-65-997, (1966).
  4. Kim N. Y., Son Y. B., Oh J. H., Hwangbo C. K., and Park M. C., "TiNx layer as an antireflection and antistatic coating for display" Surface and Coatings Technology, 128-129: 156-160(2000). https://doi.org/10.1016/S0257-8972(00)00574-0
  5. Sharma P., Sreenivas K., and Rao K. V., "Analysis of ultraviolet photoconductivity in ZnO films prepared by unbalanced magnetron sputtering" J. Appl, Phys., 93(7):3963-3970(2003). https://doi.org/10.1063/1.1558994
  6. Ding X. Z., Zeng X. T., Liu Y. C., and Zhao L. R., "Effect of oxygen incorporation on structural and properties of Ti-Si-N nanocoposite coatings deposited by reactive unbalanced magnetron sputtering", J. Vac. Sci. Technol. A24(4): 974-977(2006).
  7. 이재철, 안성훈, "초음속 저온분사법에 의해 적층된 알루미늄 층의 재료 물성", 한국정밀공학회지, 23(10): 88-95(2006).
  8. 박문찬, 이종근, 주경복, 이화자, 김응순, 최광호, "UBM sputtenng system에 의한 안경테용 TiN 막 제작에 있어 Oxygen 영향 연구", 한국안광학회지, 14(1):발간예정(2009).