Characterization of Porous Asphalt Concrete Coated with MMA Resin

아크릴 수지로 코팅한 배수성 아스팔트 콘크리트의 특성 평가

  • 최태준 (세종대학교 토목환경공학과) ;
  • 이현종 (세종대학교 토목환경공학과) ;
  • 김태우 (세종대학교 토목환경공학과) ;
  • 송재혁 (세종대학교 토목환경공학과)
  • Published : 2009.06.15

Abstract

This paper presents a fundamental findings of the functional and structural performance of the porous asphalt concrete coated with MMA resin. To evaluate the structural performance, cantabro, wheel tracking, moisture sensitivity and indirect tensile fatigue tests are performed. The tests results show that the cantabro loss is reduced three times and fatigue resistance is significantly increased after the specimens are coated with MMA resin. However there are little changes in the rutting and moisture damage resistances before and after the coating. Air voids, permeability and BPT(British Pendulum Test) tests are conducted to study the functional performance. It is observed form the tests that the air voids and permeability are slightly decreased after the coating. However, the changes in the air voids and permeability are negligible. The skid resistance of the coated specimens is lower than reference specimens. However, the skid resistance is maintained beyond the level of the reference specimens when silica sands are chipped on top of the coated surface.

본 연구는 배수성 아스팔트 포장의 표면을 아크릴 수지로 코팅 처리할 경우 내구성 측면 및 기능적 측면에서 어떠한 효과가 있는가를 실내시험을 통해 평가하는 기초적인 연구이다. 포장의 내구성 측면에서는 칸타브로 및 휠트래킹, 수분손상 간접 인장 피로 시험 등을 실시하였다. 시험결과 시편을 수지로 코팅을 한 경우 칸타브로 손실률이 3배 정도 감소되었고 균열에 대한 저항성도 대폭 향상되었으나 수분손상 및 소성변형의 저항성은 큰 차이가 없는 것으로 나타났다. 기능적인 측면에서는 코팅 전 후의 투수계수 및 공극률 BPT(British Pendulum Tester)를 사용한 미끄럼 저항성의 변화를 측정하였다. 시험결과 공극률 및 투수계수는 약간 저하되나 기능상의 문제는 없을 것으로 판단되며, 미끄럼 저항성은 규사를 살포하지 않을 경우 미끄럼 저항성이 감소되나 규사를 살포할 경우 코팅 전 수준 이상의 미끄럼 저항성을 확보하는 것으로 나타났다.

Keywords

References

  1. 건설교통부 (2002) "한국형 포장설계법 개발과 포장성능 개선방안 연구", 1단계 2차년도.
  2. 서재운 (2007)" 교면포장의 방수 및 보수용 아크릴 관련 연구", 석사학위 논문, 세종대학교.
  3. 이와이 시게오, 미우라 유우지 (2002)" 투수성 포장으로 amenity 향상 (투수성 포장에 의한 타이어 소음의 감쇠특성과 흡음률의 추정)", 전국건설연수센터, pp 24-32.
  4. 이현종 등(2007) "STE-620을 적용한 배수성 아스팔트 혼합물의 성능검증 및 현장 적용성 평가 연구", 연구 용역보고서, 한국도로학회.
  5. 일본도로협회 (1999) "배수성 포장 기술 지침 (안)", 한국건설기술연구원 번역, pp 1-7, 23-31
  6. 최태준 (2008) "아크릴 수지로 코팅한 배수성 아스팔트 콘크리트의 실내 공용성 평가", 석사학위 논문, 세종 대학교.
  7. ASTM D4867-88 (1988) "Standard Test Method for Effect of Moisture on Asphalt Concrete Paving Mixtures", ASTM Designation : D4867-88
  8. ASTM E 303 (1983) "Standard Test Method for Measuring Surface Friction Properties Using the British Pendulum Tester", ASTM Designation : D4867-88
  9. Prithvi S. Kandhal (1999) "Design of New- Generation Open-Graded Friction Courses", NCAT Report.