Elastomers and Composites

The Rubber Society of Korea (한국고무학회)
권호 표지

Service Lifetime Prediction of Rubber Vulcanizate Using Circular Deformation Test

원형 변형 시험을 이용한 고무 가황물의 수명 예측

  • Published : 2009.06.30
Download PDF
⟨ Previous Next ⟩

Abstract

Keywords

References

  1. 이종철, 김태근, 황기섭, 하기룡,'EPDM 함량 변화에 따른 SBR/EPDM 블렌드 혼합물의 내오존성과 물리적 성질에 관한 연구', Elastomer, 43, 8 (2008)
  2. 김완두, 김완수, 우창수, 최성신,'저온환경에서 NR/BR 블렌드 조성비 및 오일함량이 방진고무재료의 기계적 특성에 미치는 영향', Elastomer, 39, 95 (2004)
  3. 허병기, 강동국, 김혜영, 서관호, 박이순,'연료전지 스택 가스켓용 고무재료의 제조와 평가', Elastomer, 42, 232 (2007)
  4. 유명호, 이택성, 도제성, 권종호,'Nitrile butadiene rubber의 비선형성에 대한 실험적 연구', Elastomer, 42, 159 (2007)
  5. 김도현, 김현묵, 이창섭, 안원술, 김준형,'NR 발포를 사용한 자기 밀폐형 고무 재료의 연구', Elastomer, 41, 88 (2006)
  6. S.-S. Choi,'Influence of thermal aging on change of crosslink density and deformation of natural rubber vulcanizates', Bull. Kor. Chem. Soc., 21, 628 (2000)
  7. S.-S. Choi,'Change of crosslink density of sulfur-cured NR vulcanizates by thermal aging', Kor. Polym. J., 7, 108(1999) https://doi.org/10.1295/polymj.7.108
  8. S.-S. Choi,'Influence of rubber composition on change of crosslink density of rubber vulcanizates with EV cure system by thermal aging', J. Appl. Polym. Sci., 75, 1378 (2000) https://doi.org/10.1002/(SICI)1097-4628(20000314)75:11<1378::AID-APP9>3.0.CO;2-I
  9. S.-S. Choi,'Influence of internal strain on change of crosslink density in rubber vulcanizates', Polym. Int., 50, 107 (2001) https://doi.org/10.1002/1097-0126(200101)50:1<107::AID-PI593>3.0.CO;2-Z
  10. S.-S. Choi, D.-H. Han, S.-W. Ko, and H. S. Lee,'Thermal aging behaviors of elemental sulfur-free polyisoprene vulcanizates', Bull. Kor. Chem. Soc., 26, 1853 (2005) https://doi.org/10.5012/bkcs.2005.26.11.1853
  11. S.-S. Choi, S.-H. Ha, and C.-S. Woo,'Thermal aging behaviors of rubber vulcanizates cured with single and binary cure systems', Bull. Kor. Chem. Soc., 27, 429 (2006) https://doi.org/10.5012/bkcs.2006.27.3.429
  12. N. J. Morrison and M. Porter,'Temperature effects on the stability of intermediates and crosslinks in sulfur vulcanization', Rubber Chem. Technol., 57, 63 (1984) https://doi.org/10.5254/1.3536002
  13. R. W. Layer,'Recuring vulcanizates. I. A novel way to study the mechanism of vulcanization', Rubber Chem. Technol., 65, 211 (1992) https://doi.org/10.5254/1.3538601
  14. M. R. Krejsa and J. L. Koenig,'Review of sulfur crosslinking fundamentals for accelerated and unaccelerated vulcanization', Rubber Chem. Technol., 66, 376 (1993) https://doi.org/10.5254/1.3538317
  15. S. K. Chakraborty, A. K. Bhowmick, and S. K. De,'Mixed crosslink systems in elastomers', J. Macromol. Sci.-Rev. Macromol. Chem., C21, 313 (1981-82) https://doi.org/10.1080/00222358108080020
  16. M. van Duin and A. Souphanthong,'The chemistry of phenol formaldehyde resin vulcanization of EPDM: Part I. Evidence for methylene crosslinks', Rubber Chem. Technol., 68, 717 (1995) https://doi.org/10.5254/1.3538768
  17. C. J. Hann, A. B. Sullivan, B. C. Host, and G. H. Kuhls, Jr., 'Vulcanization chemistry, comparison of the new accelerator N-t-butyl-2-benzothiazole sulfenimide (TBSI) with N-t-butyl-2-benzothiazole sulfenamide (TBBS)', Rubber Chem. Technol., 67, 76 (1994) https://doi.org/10.5254/1.3538668
  18. R. N. Datta,'Dual function curative for NR', J. Appl. Polym. Sci., 37, 443 (1989) https://doi.org/10.1002/app.1989.070370211
  19. E. Morita,'Correlation analysis of curing agents', Rubber Chem. Technol., 57, 744 (1984) https://doi.org/10.5254/1.3536030
  20. D. S. Campbell,'Structural characterization of vulcanizates 12. Efficient vulcanization using a sulfenamide-thiuram disulfide accelerator system', Rubber Chem. Technol., 45, 1366 (1972) https://doi.org/10.5254/1.3544744
  21. M. S. Feldshtein, I. G. Chernomorskaya, E. N. Guryanova, and I. I. Eitingon,'Accelerator activity of 2-benzothiazole sulfenamide datives and the exchange of benzyl thiyl radicals with radioactive 2-benzthiazyl disulfide', Rubber Chem. Technol., 35, 562 (1962)
  22. S.-S. Choi,'Cure characteristics of carbon black-filled rubber compounds composed of NR, SBR, and BR', Elastomer, 35, 215 (2000)
  23. S.-H. Chough and D.-H. Chang,'Kinetics of sulfur vulcanization of NR, BR, SBR, and their blends using a rheometer and DSC', J. Appl. Polym. Sci., 61, 449 (1996) https://doi.org/10.1002/(SICI)1097-4628(19960718)61:3<449::AID-APP7>3.0.CO;2-I
  24. S.-S. Choi,'Bond dissociation of sulfur crosslinks in IR and BR vulcanizates using semi-empirical calculations', Kor. Polym. J., 5, 39 (1997)
  25. K. T. Gillen, R. Bernstein, and M. H. Wilson,'Predicting and confirming the lifetime of o-rings', Polym. Deg. Stab., 87, 257 (2005) https://doi.org/10.1016/j.polymdegradstab.2004.07.019
  26. S.-S. Choi, Hye-Min Lee, Ji-Eun Ko, and Min-Chul Kim, 'Recovery behaviors of silica-reinforced SBR vulcanizates using circular deformation test', J. Ind. Eng. Chem., 13, 1169 (2007)
  27. S.-S. Choi and D.-H. Han,'Recovery prediction of thermally aged CR composite using deformation test', J. Appl. Polym. Sci., 110, 3560 (2008) https://doi.org/10.1002/app.28866
  28. S. -S. Choi and D.-H. Han,'Comparison of recovery behaviors of thermally aged SBR composite from compressed and circular deformations', Thermochimica Acta, in press https://doi.org/10.1016/j.tca.2009.01.030