Journal of the Korean Society for Railway (한국철도학회논문집)

The Korean Society for Railway (한국철도학회)
권호 표지

A Guided Wave-Based Structural Damage Detection Method for Structural Health Monitoring

구조물의 건전성 모니터링을 위한 유도초음파 응용 구조손상 탐지기법

  • 고한석 (인하대학교 기계공학과) ;
  • 이우식 (인하대학교 기계공학과)
  • Published : 2009.06.30
Download PDF
⟨ Previous Next ⟩

Abstract

How to efficiently and accurately detect the damages generated in a structure has become an important issue for structural health monitoring (SHM). Most existing SHM techniques require the baseline data which should be measured before a structure get damaged. Thus, this paper presents a new pitch-catch method-based SHM technique which will not require the baseline data any more. In the proposed SHM technique, the imaging method is also utilized to visualize damage locations. The proposed SHM technique is then validated through the damage detection texts for damaged aluminum plates.

구조물 건전성 모니터 링에서 구조물에 발생한 손상을 어떠한 방법으로 가장 효율적이고 정확하게 탐지하느냐는 매우 중요한 연구과제이다. 기존의 대부분 SHM기술에서는 구조물에 손상이 발생하기 이전에 측정해 놓은 탄성파신호를 손상 검출을 위한 기준 데이터로서 활용하고 있다. 본 연구에서는 Lamb파를 이용하는 pitch-catch (PC)-기법을 기반으로 기준 데이터를 필요로 하지 않는 새로운 SHM기술을 제안하였다. 또한 손상 신호에 이미지화 기법을 적용하여 손상의 위치를 이미지화 함으로써 손쉽게 파악할 수 있도록 하였다. 제안된 SHM기술은 알루미늄 평판 시편에 대한 실험을 통해 응용 가능성을 고찰하였다.

Keywords

References

  1. Raghavan, A. and Cesnick, C.E.S.(2007), "Review of guided-wave structural health monitoring," The Shock and Vibration, Vol. 32, No. 2, pp. 91-114
  2. Montalvao, D., Maia, N.M.M., and Rabeiro, A.M.R.(2006),"A review of vibration-based structural health monitoring with special mephasis on composite materials," The Shock and Vibration, Vol. 38, No. 4, pp. 295-324 https://doi.org/10.1177/0583102406065898
  3. Giurgiutiu, V. and Cuc, A.(2005), "Embedded non-destructive evaluation for structural health monitoring, damage detection, and failure prevention," The Shock and Vibration Digest, Vol.37, No. 2, pp. 83-105 https://doi.org/10.1177/0583102405052561
  4. Anton, S.R.(2008), "baseline-free and self-poweed structural health monitoring," MS Thesis, Virginia Polytechnic Institute and State University, Virginia, USA
  5. Viktorov, I.A.(1967), "Rayleigh and Lamb waves - physical theory and applications," Plenum Press, New York
  6. Prasad, S.M., Balasubramaniam, K., and Krishnamurthy, C.(2004), "Structural health monitoring of composite structures using Lamb wave tomography," Smart Materials and Structures, Vol. 13, No. 5, pp. 873-879 https://doi.org/10.1088/0964-1726/13/4/025
  7. Tua, P., Quek, S., and Wang, Q.(2005), "Detection of cracks in cylindrical pipes and plates using piezo-actuated Lamb waves, Smart Materials and Structures," Vol. 14, No. 6, pp. 1325-1342 https://doi.org/10.1088/0964-1726/14/6/025
  8. Park, S., Yun, C.B., Roh, Y., and Lee, J.J.(2006), "PZT-bassed active damage detection techniques for steel bridge components," Smart Materials and Structures, Vol. 13, No. 5, pp. 873-879
  9. Cuc, A., Gougiutiu, V., Joshi, S., and Tidwell, Z.(2007), "Structural health monitoring with piezoelectric wafer active sensors for space applications," AIAA Journal, Vol. 45, No. 12, pp. 2838-2850 https://doi.org/10.2514/1.26141
  10. Ihn, J.B. and Chang, F.K.(2008), "Pitch-catch sesing methods in structural health monitoring for aircraft structures," Structural health Monitoring, Vol. 7, No. 1, pp. 5-15 https://doi.org/10.1177/1475921707081979
  11. Rose, J.L., Ditri, J.J., Pilarski, A., Rajana, K., and Carr, F.T.(1994), "A guided wave inspection technique for nuclear steam generator tuning," NDT&E International, Vol. 27, pp. 307-310 https://doi.org/10.1016/0963-8695(94)90211-9
  12. Alleyne, D.N., Pavlakovic, B., Lowe, M.J.S. and Cawley, P.(2001), "Rapid, long-range inspectionof chemical plant pipework using guided waves," Review of Progress in QNDE, Vol. 20, pp. 180-187
  13. Giurgiutiu, V., Zagrai, A., and Bao, J.(2004), "Damage identification in aging aircraft structures with piezoelectric wafer active sensors," Journal of Intelligent Material Systems and Structures, Vol. 15, No. 9-10, pp. 673-687 https://doi.org/10.1177/1045389X04038051
  14. Fink, M.(1992), "Time reversal of ultrasonic fields - Part I: basic principles," IEEE Transactions on Ultrasonics Ferroelectrics and Frequency Control, Vol. 39, No. 5, pp. 555-566 https://doi.org/10.1109/58.156174
  15. Wang, CH.H., Rose, J.T., and Chang, F.K.(2004), "A synthetic time-reversal imaging method for structural health monitoring," Smart Materials and Structures, Vol. 13, pp. 415-423
  16. Shon, H., park, H.W., Law, K.H., and Farrar, C.R.(2007), "Damage detection in composite plates by using an enhanced time reversal method," Journal of Aerospace Engineering, Vol. 20, No. 3, pp. 141-151 https://doi.org/10.1061/(ASCE)0893-1321(2007)20:3(141)
  17. Santani, G.B., Yu, L., Xu, B., and Giurgiutiu, V.(2007),"Lamb wave-mode tuning of piezo-electric wafer active sensors for structural health monitoring, " Journal of Vibratin and Acoustics, Vol. 129, No. 6, pp. 752-762 https://doi.org/10.1115/1.2748469
  18. Ihn, J.B.(2003), "Built-in diagnostics for monitoring fatigue crack growth in aircraft structures," PhD Thesis, Standard University, CA, USA