Journal of the Korean Society for Precision Engineering (한국정밀공학회지)

Korean Society for Precision Engineering (한국정밀공학회)
권호 표지

Development of Moulds and Dies Using Direct Metal Rapid Tooling & Manufacturing Technologies

직접식 금속 쾌속 툴링/생산 기술을 이용한 금형 개발

  • Published : 2009.08.01
Download PDF
⟨ Previous Next ⟩

Abstract

Keywords

References

  1. Ahn, D. G. and Yang, D. Y., "Principle of Rapid Prototyping and Its Trends," Journal of the Korean Society of Precision Engineering, Vol. 22, No.10, pp. 7-16, 2005
  2. Wohlers, T. T., "Wohlers Report 2007: Rapid Prototyping & Manufacturing State of the Industry Annual Worldwide Progress Report," Wohlers Associates, 2006
  3. Levy, G. N., Schindel, R. and Kruth, J. P., "Rapid Manufacturing and Rapid Tooling with Layer Manufacturing (LM) Technologies, State of the Art and Future Perspectives," Annals of the CIRP, Vol. 52, No. 2, pp. 589-609, 2003 https://doi.org/10.1016/S0007-8506(07)60206-6
  4. Himmer, T., Techel, A., Nowotny, S. and Beyer, E., "Recent Developments in Metal Laminated Tooling by Multiple Laser Processing," Rapid Prototyping Journal, Vol. 9, No. 1, pp. 24-29, 2003 https://doi.org/10.1108/13552540310455629
  5. http://www.prometal.com
  6. http://www.3DSystems.com
  7. http://www.eos-gmbh.de
  8. http://www.optomec.com
  9. http://www.pom.net
  10. http://www.mcp-group.de
  11. http://www.inssteck.com
  12. http://www.arcam.com
  13. Hopkinson, N., Hague, R. J. M. and Dickens, P. M., "Rapid Manufacturing: An Industrial Revolution for the Digital Age," John Wiley & Sons Ltd., 2006
  14. Knights, M., "Rapid Tooling It's Faster in Molding, Too," Plastic Technology Online Article, pp. 1-6, 2003
  15. Wimpenny, D. I., Bryden, B. and Pashby, I. R., "Rapid Laminated Tooling," Journal of Materials Processing Technology, Vol. 138, No. 1, pp. 214-218, 2003 https://doi.org/10.1016/S0924-0136(03)00074-8
  16. Park, Y. and Colton, J. S., "Failure Analysis of Rapid Prototyped Tooling in Sheet Metal Forming-V Die Bending," Transactions of the ASME: Journal of Manufacturing Science and Engineering, Vol. 127, No. 1, pp. 116-125, 2005 https://doi.org/10.1115/1.1828053
  17. Ahn, D. G., Lee, S. H., Kim, M. S., Han, G. Y., Kim, J.S., Moon, H. S. and Yoon. Y. S., "Investigation into the Development of Deep Drawing Tools with Small size for Electronic Parts Utilizing the CAE and RP/RT Technology," Proc. of KSPE Autumn Conference, pp. 334-337, 2005
  18. Kolleck, R., Pfanner, S. and Warnke, E. P., "Development of Cooled Tools for Press Hardening of Boron Steel Sheet," Key Engineering Materials, Vol. 344, pp. 225 - 232, 2007 https://doi.org/10.4028/www.scientific.net/KEM.344.225
  19. Xu, X., Sachs, E. and Allen, S., "The Design of Conformal Cooling Channels in Injection Molding Tooling," Polymer Engineering and Science, Vol. 41, No. 7, pp. 1265-1279, 2001 https://doi.org/10.1002/pen.10827
  20. Himmer, T., Nakagawa, T. and Anzai, M., "Lamination of Metal Sheets," Computers in Industry, Vol. 39, No. 1, pp. 27-33, 1999 https://doi.org/10.1016/S0166-3615(98)00122-5
  21. Sachs, E., Wylonis, E., Allen, S., Cima, M. and Guo, H, "Production of Injection Molding Tooling with Conformal Cooling Channels Using the Three Dimensional Printing Process," Polymer Engineering and Science, Vol. 40, No. 5, pp. 1232-1247, 2000 https://doi.org/10.1002/pen.11251
  22. Dalgarno, K. W. and Stewart, T. D., "Manufacture of Production Injection Mould Tooling Incorporating Conformal Cooling Channels via Indirect Selective Laser Sintering," Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Vol. 215, pp. 1323-1332, 2003 https://doi.org/10.1243/0954405011519042
  23. Kim, J. D., Hong, S. K., Lee, K. H, Kim, M. A. and Lee. D. K., "Implementation of 3-Dimensional Cooling Channel in Injection Mold Using RT Technology," Proc. of KSPE Spring Conference, pp. 199-200, 2006
  24. Ahn, D. G. and Park. S. H., "Manufacturing of Injection Mold with a High Cooling Rate Using DMT Rapid Prototyping Process," Proc. of KSPE Spring Conference, pp. 18-20, 2006
  25. Mazumder, J., Dutta, D., Kikuchi, N. and Ghosh, A., "Closed Loop Direct Metal Deposition: Art to Part," Optics and Lasers Engineering, Vol. 34, No. 4-6, pp. 397-414, 2000 https://doi.org/10.1016/S0143-8166(00)00072-5
  26. Beaman, J. J., Atwood, C., Bergman, T. L., Bourell, D., Hollister, S. and Rosen, D., "WTEC Panel Report on Addictive/Subtractive Manufacturing Research and Development in Europe," World Technology Evaluation Center, pp. 68-69, 2004
  27. Ahn, D. G. and Kim, H. W., "Investigation into Variation of Thermal Characteristics for the Mould with Multi-materials," Proc. of KSPE Spring Conference, pp. 223-224, 2007
  28. Walczyk, D. F. and Hardt, D. E., "A New Rapid Tooling Method for Sheet Metal Forming Dies," Proceedings of the 5th International Conference on Rapid Prototyping, pp. 275-289, 1994
  29. Park, Y. and Colton, J. S., "Failure Analysis of Rapid Prototyped Tooling in Sheet Metal Forming-Cylindrical Cup Drawing," Transactions of the ASME: Journal of Manufacturing Science and Engineering, Vol. 127, No. 1, pp. 126-137, 2005 https://doi.org/10.1115/1.1828054
  30. Nakagawa, T., "Advances in Prototype and Low Volume Sheet Forming and Tooling," Journal of Materials Processing Technology, Vol. 98, No. 2, pp. 224-250, 2000 https://doi.org/10.1016/S0924-0136(99)00203-4
  31. Kuzman, K., Geiger, M., Coremans, A., Cser, L. and Kruth, J. P., "Rapid Sheet Metal Development Chain Supported by Laser Sintered Active Tool Parts," Proceedings of the 6th International Conference on Technology of Plasticity, Vol. II, pp. 999-1004, 1999
  32. Cheah, C. M., Chua, C. K., Lee, C. W., Lim, S. T., Eu, K. H. and Lin, L. T., "Rapid Sheet Metal Manufacturing. Part 2: Direct Rapid Tooling," TheInternational Journal of Advanced Manufacturing Technology, Vol. 19, No. 7, pp. 510-515, 2002 https://doi.org/10.1007/s001700200054
  33. Morrow, W. R., Qi, H., Kim, I., Mazumder, J. and Skerlos, S. J., 'Environmental Aspects of Laser-based and Conventional Tool and Die Manufacturing,' Journal of Cleaner Production, Vol. 15, No. 10, pp. 932-943, 2007 https://doi.org/10.1016/j.jclepro.2005.11.030
  34. Shi, D. P. and Gibson, I., "Surface Finishing of Selective Laser Sintering Parts with Robot," Proceedings of the Solid Freeform Symposium, pp. 27-36, 1998
  35. Shi, D. and Gibson, I., "Improving Surface Quality of Selective Laser Sintered Rapid Prototype Parts Using Robotic Finishing," Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Vol. 214, No. 3, pp. 197-203, 2000 https://doi.org/10.1243/0954405001517586
  36. Ahn, D. G. and Kim, H. W., "Rapid Tooling of Injection Mould with a High Cooling Rate Using Laser-aided Direct Metal Tooling (DMT) Process," Proceedings of the 9th International Conference on Technology of Plasticity, pp. 545-548, 2008