Journal of the Korean Vacuum Society (한국진공학회지)

The Korean Vacuum Society (한국진공학회)
권호 표지
DOI QR코드

DOI QR Code

Magnetic Permeability Measurement of Stainless Steels in Vacuum Chamber Fabrication

스테인리스강 진공용기 제작 공정중 투자율 변화 측정

  • Received : 2010.08.24
  • Accepted : 2010.10.28
  • Published : 2010.11.30
Download PDF
⟨ Previous Next ⟩

Abstract

We measured the magnetic properties of stainless steels type 304 and 316L to see if those materials can be used for the applications where non-magnetic materials are required. The results show that the relative permeability of samples was greatly increased during manufacturing processes. After full solution annealing, however the permeability could be reduced to less than 1.02. Thus, the materials may be employed in the low-permeability applications.

방사광 가속기 저장링 진공용기의 주요 소재로 사용되고 있는 스테인리스강 304, 316L의 투자율(Magnetic Permeability) 변화를 측정하여, 비자성 재료가 요구되는 응용 분야에서 활용가능한지 살펴보았다. 투자율은 용접, 굽힘 등 진공용기 제작 과정에서 크게 상승하였으나, 제작 후 고용화 열처리 공정을 거친다면 상대투자율 1.02 이하가 요구되는 분야에서 사용가능함을 알 수 있었다.

Keywords

References

  1. D. Jiang, Y. Chen, L. Chen, W. Li, Y. Lu, and Y. Liu, Proceedings of the 2007 Asian Particle Accelerator Conference APAC07, p. 708 (www.jacow.org).
  2. A. Blednykh and S. Krinsky, Proceedings of the 2007 Particle Accelerator Conference PAC07, p. 4333 (www.jacow.org).
  3. R. Kersevan and L. Goirand, Proceedings of the 2007 Particle Accelerator Conference PAC07, p. 164 (www.jacow.org).
  4. G. Hsiung, C. Chan, C. Chang, H. Hsueh, and T. Yang, Proceedings of the 2006 European Particle Accelerator Conference EPAC06, p. 3433 (www. jacow.org).
  5. C. D. Park, Proceedings of the 35th KVS meeting (2008).
  6. C. D. Park, T.-Y. Lee, I. H Bae, and S. M. Chung, J. Vac. Sci. Technol. A. 18, 2272 (2000).
  7. C. D. Park, J. Kor. Vac. Soc. 17, 1 (2008). https://doi.org/10.5757/JKVS.2008.17.1.001
  8. C. D. Park, T. Ha, S. Moon, I. Bae, and S. Chung, J. Kor. Vac. Soc. 10, 164 (2001).
  9. C. D. Park, S. M. Chung, D. J. Seong, Y. H. Shin, and K. H. Chung, J. Korean Phys. Soc. 51, 912 (2007). https://doi.org/10.3938/jkps.51.912
  10. S. H Lee, I. Vasserman, S. Sasaki, and D. Walters, Proceedings of the 2005 Free electron Laser Conference FEL05, p. 383 (www.jacow.org).
  11. N. Wilson and P. Bunch, Proceedings of the 2007 Particle Accelerator Conference PAC91, p. 2322 (www.jacow.org).
  12. C. Weber and J. Fajans, Rev. Sci. Inst. 69, 3695 (1998). https://doi.org/10.1063/1.1149160
  13. www.stefan-mayer.com.
  14. Permeability indicator No. 3988 5150, manufactured by Severn Engineering Company, Annapolis, MD.
  15. See, e.g. Technical notes, British Stainless Steel Association, www.bssa.org.uk.

Cited by

  1. Analysis of magnetic field distribution in a cylindrical-type magnetron sputtering system vol.227, pp.6, 2013, https://doi.org/10.1177/0954405413477854