Ultrasonic Nonlinearity Measurement in Heat Treated SA508 Alloy: Influences of Grains and Precipitates

열처리된 SA508 합금에서의 초음파 비선형성 측정: 결정립과 석출물 영향

  • Received : 2010.08.10
  • Accepted : 2010.10.08
  • Published : 2010.10.30

Abstract

In the present study, the influences of grains and precipitates of microstructural evolution on the ultrasonic nonlinearity have been experimentally investigated. The prior-austenite grain and precipitate size are controlled by the variation in austenitizing and tempering conditions in reactor pressure vessel materials of nuclear power plant, SA508 Gr.3 low alloys. The ultrasonic nonlinearity was found to have strong correlations with grains and precipitates since the ultrasonic nonlinear parameter $\beta$ shows decrease trend with coarsening of grains and precipitates. Although the prior-austenite grain size increased, the $\beta$ changed little due to the effects of subgrains, packets and laths. For the preciptate effects, the $\beta$ decreased sharply due to decrease in $Mo_2C$ causing the coherency stain in addition to the precipitate size. The results in this study may provide a potential for characterizing the microstructural evolution, grains and precipitates, by measuring the ultrasonic nonlinearity.

본 연구에서는 합금강의 미세조직 특성인 결정립과 석출물이 초음파 비선형성에 미치는 영향을 실험적으로 연구하였다. 원자로 압력용기 재료인 SA508 Gr.3 저합금강을 오스테나이징과 템퍼링 조건을 변화시켜 모상의 오스테나이트 결정립 크기와 석출물 크기를 제어하였다. 결정립과 석출물 모두 크기가 조대해 짐에 따라 초음파 비선형 파라미터는 낮아지는 경향을 보이므로 초음파 비선형성이 결정립과 석출물과 밀접한 상관성이 있음을 알 수 있었다. 모상의 오스테나이트 결정립이 성장하더라도 패킷과 래스 하부업계의 영향으로 초음파 비선형 파라미터는 큰 변화를 보이지 않았다. 석출물의 영향으로 석출물의 크기 외에 정합변형을 일으키는 $Mo_2C$의 감소로 인해 초음파 비선형 파라미터가 큰 감소를 나타내었다. 본 연구결과 초음파 비선형성을 측정하므로써 결정립과 석출물의 미세조직 특성을 평가하는 것이 가능하다.

Keywords

Acknowledgement

Supported by : 한국연구재단

References

  1. 김경조, 장경영, Y. Hisashi, "초음파 비선형전파특성을 이용한 부분 열화 재료의 평가", 비파괴검사학회지, Vol. 25, No. 2, pp. 214-219 (2001)
  2. C. S. Kim, I. K. Park, K. Y. Jhang and N. Y. Kim, "Experimental characterization of cyclic deformation in copper using ultrasonic nonlinearity," Journal of the Korean Society for Nondestructive Testing, Vol. 28, No.3, pp, 285-291 (2008)
  3. 이태훈, 장경영, "초음파의 비선형 특성을 이용한 미세균열 평가", 비파괴검사학회지, Vol. 28, No.4, pp. 352-357 (2008)
  4. J. H. Cantrell and W. T. Yost, "Effect of precipitate coherency strains on acoustic harmonic generation," Journal of Applied Physics, Vol. 81, No.7, pp. 2957-2962 (1997) https://doi.org/10.1063/1.364327
  5. K. Y. Jhang, "Applications of nonlinear ultrasonics to the NDE of material degradation," IEEE Transactions on Ultrasonics Ferroelectrics and Frequency Control, Vol. 47, No.3, pp. 540-548 (2000) https://doi.org/10.1109/58.842040
  6. C. Bermes, J. Y. Kim, J. Qu and L. J. Jacobs, "Experimental characterization of material nonlinearity using Lamb waves", Applied Physics Letters, Vol 90, Issue 2, pp. 021901-021901-3, (2007) https://doi.org/10.1063/1.2431467
  7. 김정석, 박익근, "석출물과 전위에 기인한 초음파 비선형성 파라미터", 한국정밀공학회지, Vol. 25, No. 7, pp. 131-138, (2008)
  8. 남태형, 최생호, 장경영, 김정석, 이태훈, "협대역 레이저 여기 표면파의 음향비선형성을 이용한 AI6061 합금의 굽힘피로손상 평가", 비파괴검사학회지지 Vol. 30. No.2, pp. 139-145 (2010)
  9. D. J. Barnard, ''Variation of nonlinearity parameter at low fundamental amplitudes," Applied Physics Letters, Vol. 74, No. 17, pp. 2447-2449 (1999) https://doi.org/10.1063/1.123876
  10. J. Y. Kim, A. Baltazar and S. I. Rokhlin, "Ultrasonic assessment of rough surface contact between solids from elastoplastic loading - unloading hysteresis cycle," Journal of the Mechanics and Physics of Solids, Vol. 52, Issue 8, pp. 1911-1934 (2004) https://doi.org/10.1016/j.jmps.2004.01.006
  11. W. B. Gauster and M. A. Breazeale, "Ultrasonic measurement of the nonlinearity parameters of copper single crystals," The American Physical Society, Vol. 168, No.3, pp. 655-661 (1998)
  12. A. Hikata, B. B. Chick and C. Elbaum, "Dislocation contribution to the second harmonic generation of ultrasonic waves," Journal of Applied Physics, Vol. 36, Issue 1, pp. 229-236 (1965) https://doi.org/10.1063/1.1713881
  13. J. H. Cantrell and W. T. Yost, "Nonlinear ultrasonic characterization of fatigue microstructures," International Journal of Fatigue, Vol. 23, Supplement 1, pp. 487-490 (2001)
  14. D. C. Hurley, D. Balzar, P. T. Purtscher and K. W. Hollman, "Nonlinear ultrasonic parameter in quenched martensitic steels," Journal of Applied Physics, Vol. 83, No.9, pp. 4584-4588 (1998) https://doi.org/10.1063/1.367241
  15. 양원존, 이봉상, 김민철, 홍준화, 허무영, "베이 나이트계 저합금강의 천이온도영역에서 취성파괴에 미치는 결정립 크기의 영향 고찰", 대한금속.재료학회지, Vol. 41, No. 11, pp. 855-862 (2003)
  16. V. Moorthy, S. Vaidyanathan, T. Jayakumar and Baldev Raj, "Mircrostructural characterization of quenched and tempered 0.2% carbon steel using magnetic Barkhausen noise analysis," Journal of Magnetism and Magnetic Materials, Vol. 171, Issue 1-2, pp. 179-189 (1997) https://doi.org/10.1016/S0304-8853(97)00049-8
  17. I. H. Lee, D. S. Son, I. H. Lee, T. H. Lee and K. Y. Jhang, "Development of pressure control system of contact transducer for measurement of ultrasonic nonlinear parameter," Journal of the Korean Society for Nondestructive Testing, Vol. 27, No.6, pp. 576-581 (2007)
  18. 최익황, 이재익, 권구도, 장경영, "접촉식 탐촉자를 이용한 초음파 비선형 파라미터의 측정에서 시스템에 의존하는 고조파 성분의 영향", 비파괴검사학회지, Vol. 28, No.4, pp. 358-363 (2008)
  19. V. L. Safonov and H. N. Bertram, "Magnetization reversal as a nonlinear multimode process," Journal of Applied Physics, Vol. 85, Issue 8, pp. 5072-5075 (1999) https://doi.org/10.1063/1.370094
  20. B. J. Lee, H. D. Kim and J. H. Hong, "Calculation of $\alpha/\gamma$ equilibria in SA508 grade 3 steels for intercritical heat treatment," Metallurgical and Materials Transactions A, Vol. 29A, No.5, pp. 1441-1447 (1998)
  21. H. H. Jin, C. S. Shin, D. H. Kim, K. H. Oh and J. H. Kwon, "Evolution of a needle shaped carbide in SA508 Gr. 3 steel," ISIJ International, Vol. 48, No. 12, pp. 1810-1812 (2008) https://doi.org/10.2355/isijinternational.48.1810
  22. R. D. Peters and M. A. Breazeale, "Ultrasonic measurement of the temperature dependence of the nonlinearity parameters of copper," The American Physical Society, Vol. 1, Issue 8, pp. 3245-3250 (1970)