Journal of Power System Engineering (동력기계공학회지)

The Korean Society for Power System Engineering (한국동력기계공학회)
권호 표지

Improvement Noise Attenuation Performance of the Active Noise Control System Using RCMAC

RCMAC를 이용한 능동소음 제어시스템의 소음저감 성능개선

  • Received : 2010.07.12
  • Accepted : 2010.08.27
  • Published : 2010.10.31
Download PDF
⟨ Previous Next ⟩

Abstract

In this paper, a recurrent cerebellar modulation articulation control (RCMAC) has been developed for improvement of noise attenuation performance in active noise control system. For the narrow band noise, a filter-x least mean square (FXLMS) method has bee frequently employed as an algorithm for active noise control (ANC) and has a partial satisfactory noise attenuation performance. However, noise attenuation performance of an ANC system with FXLMS method is poor for broad band noise and nonlinear path since it has linear filtering structure. Thus, an ANC system using RCMAC is proposed to improve this problem. Some simulations in duct system using harmonic motor noise and KTX cabin noise as a noise source were executed. It is shown that satisfactory noise attenuation performance can be obtained.

Keywords

References

  1. Elliot S. J. and Nelson P. A., 1993, "Active Noise Control," IEEE Sign. Process Mag., Vol. 10, pp. 12-35. https://doi.org/10.1109/79.248551
  2. Kuo S. M. and Morgan D., 1996, "Active Noise Control Systems", Wiley, New York.
  3. Kuo S. M. and Morgan D. R.. 1999, "Active Noise Control: a Tutorial Review," IEEE Proc. 87, pp. 973-993.
  4. Qiu X. J. and Hansen C. H., 2000, "A Modified Filtered-x LMS Algorithm for Active Control of Periodic Noise with On-line Cancellation Path Modeling," J. of Low Frequency Noise, Vib. and Active Contr., Vol. 19, pp. 35-46. https://doi.org/10.1260/0263092001492787
  5. Zhang M., Lan, J. and Ser W., 2003, "A Robust Online Secondary Path Modeling Method with Auxiliary Noise Power Scheduling Strategy and Norm Constraint Manipulation," IEEE Trans. on Speech and Audio Proc., Vol. 11, No. 1, pp. 45-53. https://doi.org/10.1109/TSA.2003.805643
  6. Maeda Y. and Yoshida T., 1999, "An Active Noise Control without Estimation of Secondary Path-ANC Using Simultaneous Perturbation," Active 1999, Florida, USA, pp. 985-994.
  7. Souza J. M., Silva C. A. and Sa da Costa J. M., 2003, "Fuzzy Active Noise Modeling and Control," Inter. J. of Approximate Reason., Vol. 33, pp. 51-70. https://doi.org/10.1016/S0888-613X(02)00147-0
  8. Qizhi Z. and Yongle J., 2002, "Active Noise Hybrid Feedforward/Feedback Control Using Neural Network Compensation," Trans. ASME, Vol. 124, January, pp. 100-104.
  9. Zhang Q. Z., Gan W. S. and Zhou Y. L., 2006, "Adaptive Recurrent Fuzzy Neural Networks for Active Noise Control," J. Sound and Vib., Vol. 296, pp. 935-948. https://doi.org/10.1016/j.jsv.2006.03.020
  10. Albus J. S., 1975, "A New Approach to Manipulator Control: The Cerebellar Model Articulation Controller(CMAC)", Trans. ASME, J. Dyn. Syst. Meas. Contr., Vol. 97, No. 3, pp. 220-227. https://doi.org/10.1115/1.3426922
  11. Peng Y. F., Lin C. M., and Lin C. M., 2004, "Intelligent Hybrid Control for Uncertain Nonlinear Systems Using a Recurrent Cerebellar Model Articulation Controller", 2004, IET Control Theoy Appl., Vol. 151, No. 6, pp. 589-600. https://doi.org/10.1049/ip-cta:20040903