Multivariate Shewhart control charts with variable sampling intervals

가변추출간격을 갖는 다변량 슈하르트 관리도

  • Cho, Gyo-Young (Department of Statistics, Kyungpook National University)
  • Received : 2010.05.10
  • Accepted : 2010.10.05
  • Published : 2010.11.30

Abstract

The objective of this paper is to develop variable sampling interval multivariate control charts that can offer significant performance improvements compared to standard fixed sampling rate multivariate control charts. Most research on multivariate control charts has concentrated on the problem of monitoring the process mean, but here we consider the problem of simultaneously monitoring both the mean and variability of the process.

공정을 모니터링 하기 위한 전통적인 관리도는 표본들 사이의 일정한 추출간격에서 일정한 수의 표본을 취하여 만들어 지는 고정추출율 관리도이다. 본 연구의 목표는 표준적인 고정추출율을 갖는 다변량 관리도에 비하여 성능이 우수한 가변추출간격을 갖는 다변량 관리도를 개발하는데 있다. 대부분의 다변량 관리도에 대한 연구는 공정의 평균벡터를 모니터링 하는데 초점이 맞추어져 있다. 그러나 본 논문에서는 공정의 평균벡터와 분산-공분산을 동시에 모니터링 하기 위한 다변량 관리도를 연구한다. 가변추출간격을 갖는 다변량 슈하르트 관리도에 대하여 연구 하고자 한다.

Keywords

References

  1. Alt, F. A. (1984). Multivariate quality control, S. Kotz, N. L. Johnson, and C. R. Reid (Eds), The Encyclopedia of statistical Sciences, 110-122, Wiley, Newyork.
  2. Aparisi, F. (1996). Hotelling's $T^{2}$control chart with adaptive sample sizes. International Journal of Production Research, 34, 2853-2862. https://doi.org/10.1080/00207549608905062
  3. Aparisi, F. and Haro, C. L. (2001). Hotelling's $T^{2}$control chart with variable sampling intervals. International Journal of Production Research, 39, 3127-3140. https://doi.org/10.1080/00207540110054597
  4. Aparisi, F. and Haro, C. L. (2003). A comparison of $T^{2}$control charts with variable sampling schemes as opposed to MEWMA chart. International Journal of Production Research, 41, 2169-2182. https://doi.org/10.1080/0020754031000138655
  5. Baxley, R. V. Jr. (1995). An application of variable sampling interval control charts. Journal of quality Technology, 27, 275-282.
  6. Domangue, R. and Patch, S. C. (1991). Some omnibus exponentially weighted moving average statistical process monitoring schemes. Technometrics, 33, 299-313. https://doi.org/10.2307/1268782
  7. Hawkins, D. M. and Olwell, D. H. (1998). Cumulative sum control charts and charting for quality improvement, Springer-Verlag, New York.
  8. Hotelling, H. (1947). Multivariate quality control-illustrated by the air testing of sample bombsights, in techniques of statistical analysis, C. Eisenhart, M. W. Hastay, and W. A. Wallis, eds., McGraw-Hill, New York.
  9. Lowry, C. A. and Montgomery, D. C. (1995). A review of multivariate control charts. IIE Transactions, 27, 800-810. https://doi.org/10.1080/07408179508936797
  10. MacGregor, J. F. and Harris, T. J. (1993). The exponentially weighted moving variance. Journal of Quality Technology, 25, 106-118.
  11. Mason, R. L. and Young J. C. (2002). Multivariate statistical process control with industrial applications, ASA-SIAM, Philadelphia.
  12. Montgomery, D. C. (2005). Introduction to statistical quality control, 5th Edition, John Wiley & Sons, New York.
  13. Reynolds, M. R., Jr. (1995). Evaluating properties of variable sampling interval control charts. Sequential Analysis, 14, 59-97. https://doi.org/10.1080/07474949508836320
  14. Reynolds, M. R., Jr. (1996). Shewhart and EWMA variable sampling interval control charts with sampling at fixed times. Journal of Quality Technology, 28, 199-212.
  15. Reynolds, M. R., Jr., Amin, R. W., Arnold, J. C. and Nachlas, J. A. (1988). X charts with variable sampling intervals. Technometrics, 30, 181-192. https://doi.org/10.2307/1270164
  16. Reynolds, M. R., Jr. and Cho, G. Y. (2006). Multivariate control charts for monitoring the mean vector and covariance matrix. Journal of Quality Technology, 38, 230-253.
  17. Reynolds, M. R., Jr. and Ghosh, B. K. (1981). Designing control charts for means and variances. 35th Annual Quality Congress Transactions, 400-407.
  18. Reynolds, M. R., Jr. and Stoumbos, Z. G. (2001). Monitoring the process mean and variance using individual observations and variable sampling intervals. Journal of Quality Technology, 33, 181-205.
  19. Reynolds, M. R., Jr. and Stoumbos, Z. G. (2004a). Control charts and the efficient allocation of sampling resources. Technometrics, 46, 200-214. https://doi.org/10.1198/004017004000000257
  20. Reynolds, M. R., Jr. and Stoumbos, Z. G. (2004b). Should observations be grouped for effective process monitoring?. Journal of Quality Technology, 36, 343-366.
  21. Reynolds, M. R., Jr. and Stoumbos, Z. G. (2005). Should exponentially weighted moving average and cumulative sum charts be used with Shewhart limits?. Technometrics, 47, 409-424. https://doi.org/10.1198/004017005000000382
  22. Shamma, S. E. and Amin, R. W. (1993). An EWMA quality control procedure for jointly monitoring the mean and variance. International Journal of Quality and Reliability Management, 10, 58-67.
  23. Stoumbos, Z. G., Mittenthal, J. and Runger, G. C. (2001). Steady-state-optimal adaptive control charts based on variable sampling Intervals. Stochastic Analysis and Applications, 19, 1025-1057. https://doi.org/10.1081/SAP-120000759
  24. Stoumbos, Z. G. and Reynolds, M. R., Jr. (2005). Economic statistical design of adaptive control schemes for monitoring the mean and variance: an application to analyzers. Nonlinear Analysis - Real-World Applications, 6, 817-844. https://doi.org/10.1016/j.nonrwa.2005.05.002
  25. Tagaras, G. (1998). A survey of recent developments in the design of adaptive control charts. Journal of Quality Technology, 30, 212-231.
  26. Wierda, S. J. (1994). Multivariate statistical process control - recent results and directions for future research. Statistica Neerlandica, 48, 147-168. https://doi.org/10.1111/j.1467-9574.1994.tb01439.x
  27. Zhang, S. and Wu, Z. (2006). Monitoring the process mean and variance using a weighted loss function CUSUM scheme with variable sampling intervals. IIE Transactions, 38, 377-387. https://doi.org/10.1080/07408170500232578