Journal of Welding and Joining

The Korean Welding and Joining Society (대한용접접합학회)
권호 표지
DOI QR코드

DOI QR Code

Laser Welding Characteristics of 1.5GPa Grade Hot Stamping Steel for Automobiles

자동차용 1.5GPa급 핫스템핑 강판의 레이저 용접성

  • 김용 (고등기술연구원 로봇/생산기술센터) ;
  • 박기영 (고등기술연구원 로봇/생산기술센터) ;
  • 이경돈 (고등기술연구원 로봇/생산기술센터)
  • Published : 2010.12.31
Download PDF
⟨ Previous Next ⟩

Abstract

Keywords

References

  1. Taylan Altan., "Hot-stamping boron-alloyed steels for automotive parts, Part 1 : Process method and uses", Stamping Journal, December 2006
  2. Advanced High Strength Steel(AHSS) Application Guidelines, Int. Iron & Steel Institute, 2006. 9
  3. J. Choi, M. Kang, J. Cho and C. Kim, "Laser welding characteristic of ultra high strength steel for automotive application". Journal of KWS, 27-5 (2009), 471-474 (in Korean) https://doi.org/10.5781/KWJS.2009.27.5.001
  4. M. Y. Kransnoperov, R.R.G.M. Pieters, LMP p.285
  5. T.K. Han, B.H. Jung and C. Y. Kang, "Effect of the welding speed on the characteristics of Nd:YAG laser welds for automotive application : 600MPa PH high strength steel", Journal of KSLP, 10-3, 2007
  6. W. Ehling, L. Cretteur, A. Pic, R. Vierstraete, Q. Yin, "Development of a laser decoating process for fully functional Al-Si coated press hardened steel laser welded blank solutions", Proceeding of the 5th Int. WLT-Conf. on LIM., 2009. 6
  7. J. Suh, Y.H.Han. "Laser welding in automotive industry", Journal of KWS, 12 (1994), 49-63(in Korean)
  8. A. Ribolla, G. L. Damoulis and G. F. Batalha. "The use of Nd:YAG laser weld for large scale volume assembly of automotive body in white", Journal of Mater. process. Technology, 164-165 (2005), 1120-1127 https://doi.org/10.1016/j.jmatprotec.2005.02.104
  9. Jin-Young Jang. etc on., "Effect of welding speed on mechanical properties and formability in Nd:YAG laser welds of 1,000MPa Grade DP steel", Journal of KWJS. 27-2, (2009), 187-193 (in Korean) https://doi.org/10.5781/KWJS.2009.27.2.069
  10. Tae-kyo Han. etc on., "Characteristics of $CO_2$ or Nd:YAG laser welded 600MPa grade TRIP steel", Journal of KWS, 24-1 (2006), 56-63 (in Korean)
  11. In-sung Jang. "Nd:YAG laser welding for side panel", Journal of KWS. 19-4, (2001), 371-374 (in Korean)
  12. K. C. Kim., etc on., "Laser weldability of sheet steels for Tailored Blank Manufacturing", Journal of KWS, 16-1 (1998), 26-36 (in Korean)
  13. J. Suh. etc. on., "CW $CO_2$ lasr beam welding and formability of Zn-coated steel plates", Journal of KWS, 13-1 (1995), 577-587 (in Korean)
  14. H. Karbasian and A. E. Tekkaya, "A review on hot stamping", Journal of Mater. Proc. Technology, 210 (2010), 2103-2118 https://doi.org/10.1016/j.jmatprotec.2010.07.019
  15. J. Choi. etc on., "A study on laser welding characteristics of 1,500MPa grade ultra high strength steel for automotive application", Journal of KSLP, 13-3, (2010), 19-26 (in Korean)
  16. Rosa Arias etc on., "Laser welding applied to advanced high strength steels for automotive application", ICALEO, 1002 (2010), 371-379