Journal of Welding and Joining

The Korean Welding and Joining Society (대한용접접합학회)
권호 표지
DOI QR코드

DOI QR Code

A Study on the Optimal Welding Methods of Vertical Welding Positions in the Vehicle Body

자동차 차체 수직용접자세에 대한 최적 용접방법에 관한 연구

  • 김재성 (한국항공대학교 항공우주 및 기계공학과) ;
  • 최동순 (한국항공대학교 항공우주 및 기계공학과) ;
  • 김종현 (한국항공대학교 항공우주 및 기계공학과) ;
  • 이보영 (한국항공대학교 항공우주 및 기계공학부)
  • Published : 2010.12.31
Download PDF
⟨ Previous Next ⟩

Abstract

Keywords

References

  1. G Adam and T. Siewert : Sensing of GTAM droplet transfer modes using ER1100S-1 electrode, Welding Journal, 69-3 (1990), 103s-108s
  2. W. Wang, S. Liu and J.E. Jones : Flux cored arc welding; Arc signals processing and metal transfer charaterization, Welding Journal, 74-11 (1995), 369s-377s
  3. B Ogunbiyi and J. Norrish : GMAW metal transfer and arc stability assessment using monitoring indices, Computer Technology in Welding, Six international conference, Lanaken, Belgium, 9-12, 1996
  4. T. Mita, A. Sakabe and T. Yokoo : Quantitative estimate of arc stability for gas shielded arc welding, Welding International, 2 (1988), 152-159 https://doi.org/10.1080/09507118809447460
  5. T. Shinoda and H. Nishikawa : Monitoring and Signal Processing of short circuiting Metal Transfer of Metal Active Gas Welding process, Proceedings of the Int. Conf. on the Joining of Materials, May 31-June 2, (1995), 558-565
  6. D. Rehfeldt and Th. Schmitz : Fuzzy Logic in Monitoring of Arc Welding, Proceedings of the Int. Conf. on the Joining of Materials, May 31-June 2, (1995), 477-486
  7. D. Fehfeldt, A. Bollmann, T. Korbe, N. Kost and W. Rostek : Compurte-aided quality control by process analyzing monitoring and documentation, Int. Conf. for the Joining of Material JOM-5, 10-12th May, Helsingor, Denmark, (1991), 11-16
  8. V. Ponomarev, B. Lindberg and O. Al-Erhayem : JOM-ARC analyser for arc welding process, Proceengs of the Int. Conf. on the Joining of Materials, May 31-June 2, (1995), 612-615
  9. S. J. Na and H. S. Moon : A Study on High speed measuring for welding process signals and signal analysis, KWJS Autumn Conference. Octorber, Seoul, (1993), 37-40
  10. S. K. Kang, H. S. Moon and S. J. Na : A study on determining arc stability using weight of spatter, Journal of KWS, 15-6 (1997), 41-48
  11. M.J. Hermans and G. Den Quden : Process behavior and stability in short circuit gas metal arc welding, Welding Journal. 78(4), (1999), 137s-141s