한국생산제조학회지 (Journal of the Korean Society of Manufacturing Technology Engineers)

  • 제19권6호
  • /
  • Pages.739-745
  • /
  • 2010
  • /
  • 2508-5093(pISSN)
  • /
  • 2508-5107(eISSN)
한국생산제조학회 (The Korean Society of Manufacturing Technology Engineers)
권호 표지

롤러 기어 캠의 5-축 CNC 가공

5-Axis CNC Machining of Roller Gear Cam

  • 조현덕 (경일대학교 기계자동차학부) ;
  • 윤문철 (부정대학교 기계자동차공학과) ;
  • 김경진 (경일대학교 기계자동차학부)
  • 투고 : 2010.09.07
  • 심사 : 2010.10.28
  • 발행 : 2010.12.15
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The roller gear cam can control the rotational follower periodically by attaching several roller on the circumstance of follower shaft and it is widely used in non-backlash and precise actuating mechanism such as index table or ATC of machine tools. For machining the roller gear cam, 5 axis CNC machine tool is used and the geometric principle of CAM mechanism must be adopted to generate the NC-code and to develop the special CAD/CAM software because there is not commercial CAM system to machine the roller gear cam. The maker of the specially developed software in domestic user is generally from Japan or Taiwan. However these softwares do not reflect the post processing technique for finish machining in the module. Also, there is some limitation for further new application of itself and it needs higher costs for further application. In this study, the CAD/CAM software to overcome these problem was developed. And its reliability was verified by applying it in 5-axis CNC machining. Finally, the experimental result conducted in the 5-axis machining show good consistency in the movement of follower along the flute and in its Size.

키워드

참고문헌

  1. Cho, H. D., Yoon, M. C., and Kim, K. J., 2010, "5-axis CNC machining for drum cam with rotational follower - I (post processing method for rough machining)," Journal of the KSMTE, Vol. 19, No. 5, pp. 678-683.
  2. Cho, H. D., Yoon, M. C., and Kim, K. J., 2010, "5-axis CNC machining for drum cam with rotational follower - I (post processing method for finish machining)," Journal of the KSMTE, Vol. 19, No. 5, pp. 684-690.
  3. Kim, C. S., Choi, J. H., and Kim, J. U., 2010, "Technology trend and design of index table," Journal of the KSMTE, Vol. 19, No. 2, pp. 141-146.
  4. Kim, C. S., Choi, J. H., Cho, H. M., and Cho, S. Y, 2010, "A study on the stability of a barrel cam type index table," Spring conference of the KSMPE, pp. 147-148.
  5. Jo, E. J., Hwang, J. D., and Jung, Y. G., 2006, "Study on the development of post-processor for 5-axis NC machining," Journal of the KSMTE, Vol. 15, No. 3, pp. 53-58.
  6. Cho, H. D., Jun, Y. T., and Yang, M. Y., 1993, "Five- Axis CNC Milling for Effective Machining of Sculptured Surfaces," Int. J. Prod. Res., Vol. 31, No. 11, pp. 2559-2573. https://doi.org/10.1080/00207549308956883
  7. Jun, J. Y., 2004, "5-axis machining for precision machining of complicate geometric workpiece," Journal of the KSMTE, Vol. 13, No. 2, pp. 23-29.
  8. Hwang, J. D., Jung, J. Y., and Jun, Y. G, 2004, "A study on the application of reverse engineering for impeller using polynomial regression," Journal of the KSMTE, Vol. 13, No. 5, pp. 103-109.
  9. SIEMENS AG, 2004, SINUMERIK 840D/840Di/ 810D fundamentals programming guide, SIEMENS AG, Germany, pp. 234-241.