Journal of the Korean Institute of Illuminating and Electrical Installation Engineers (조명전기설비학회논문지)

The Korean Institute of IIIuminating and Electrical Installation Engineers (한국조명전기설비학회)
권호 표지
DOI QR코드

DOI QR Code

Study on Comparison Between a Toroidal SRM and a Conventional SRM

Toroidal SRM과 Conventional SRM의 특성 비교에 관한 연구

  • Received : 2010.03.02
  • Accepted : 2010.03.16
  • Published : 2010.04.30
Download PDF
⟨ Previous Next ⟩

Abstract

This paper discusses comparison between a CSRM(conventional SRM) and a TSRM(toroidal SRM). Unlike the CSRM, the TSRM has its windings mounted around the stator york instead of the stator pole. Therefore, the TSRM has many different properties in terms of the structure as well as the waveform of phase currents, phase voltages, back-EMF, flux linkages, etc. This paper presents the theoretical comparison between the TSRM and the CSRM followed by simulation results.

본 논문에서는 토로이달 타입 SRM(switched reluctance motor)과 일반적인 SRM의 특성에 대해 비교 연구하였다. TSRM(toroidal SRM)은 CSRM(conventional SRM)과는 다르게 권선이 고정자의 돌극이 아닌 요크에 감겨있는 형태로 되어 있다. 따라서 TSRM은 구조뿐만 아니라 구동회로, 구동방법, 전류, 유기전압, 쇄교자속 등이 CSRM과는 다른 특성을 갖는다. 본 논문에서는 TSRM과 CSRM을 이론적으로 비교하고 시뮬레이션을 통하여 각각의 구동 특성을 분석하여 비교하였다.

Keywords

References

  1. B. C. Mecrow, “New winding configurations for doubly salient reluctance machines”, IEEE Trans. on Ind. Appl., Vol. 32, No. 6, pp. 1348-1356, November/December 1996. https://doi.org/10.1109/28.556638
  2. B. C. Mecrow “Fully pitched-winding switched-reluctance and stepping-motor arrangements”, IEE Proc. B [see also IEE Proc.-Electric Power Appl.] Electric Power Appl., Vol. 140 Issue: 1, pp. 61-70, Jan. 1993.
  3. B. C. Mecrow, A. C. Clothier, P. G. Barrass and C. Weiner, “Drive configurations for fully-pitched winding switched reluctance machines”, The Thirty-Third IAS Ann. Mtg., IEEE Ind. Appl. Conf., Vol. 1, pp. 563-570, Oct. 1998.
  4. K. B. Kim, “Toroidal switched reluctance motor part 1. fundamentals”, Korea-Germany symposium, pp. 135-141, Nov. 1998.
  5. 양형열, “토로이달 스위치드 릴럭턴스 전동기의 특성 분석”, 한국조명전기설비학회논문지, Vol.23, No.6, pp. 59-65, 2009. https://doi.org/10.5207/JIEIE.2009.23.6.059
  6. M. Garip, Y. Ozoglu and E. Mese, “An approach to torque ripple reduction in fully pitched switched reluctance motors by pole tip shaping”, 11th Mediterranean Electrotechnical Conf., pp. 157-161, May 2002.
  7. Y. Zhou, C. Xia, Z. He and X. Xie, “Torque Ripple Minimization in a Sensorless Switched Reluctance Motor Based on Flexible Neural Networks”, 2007 IEEE International Conference on Control and Automation, Guangzhou, CHINA, pp. 2340-2344, May 30 to June 1, 2007.