한국생산제조학회지 (Journal of the Korean Society of Manufacturing Technology Engineers)

  • 제19권2호
  • /
  • Pages.191-197
  • /
  • 2010
  • /
  • 2508-5093(pISSN)
  • /
  • 2508-5107(eISSN)
한국생산제조학회 (The Korean Society of Manufacturing Technology Engineers)
권호 표지

고유벡터의 변화량에 의한 비례감쇠구조물의 변경질량 및 그 위치 해석

Analysis of mass and location of proportional damping system using the change of eigenvectors

  • 이정윤 (경기대학교 기계시스템공학과)
  • 투고 : 2009.07.31
  • 심사 : 2010.03.09
  • 발행 : 2010.04.15
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

In spite of a large amount of previous research, detail study on modified mass in proportional damping system is not well understood. It is common to predict structural dynamic design parameters due to the change of mass, but to predict the amount of modified mass and the location where the mass is being modified are rarely found in previous literature. Such inverse problem required detail analytical study in order to understand structural modification in proportional damping system. This paper predicts the modified mass and the modified mass location in proportional damping system using sensitivity coefficients and iterative method. The sensitivity coefficients are obtained from the change of eigenvectors due to mass modification. This method is applied to a horizontal beam and three degree of freedoms system. To validate the predicted changing mass and its location, the obtained results are compared to the reanalysis result which shows good agreement.

키워드

참고문헌

  1. Fox, R. L. and Kapoor. M. P, 1968. "Rates of Change of Eigenvalues and Eigenvectors." AIAA Journal, Vol. 6, No. 12 pp. 2426-2429. https://doi.org/10.2514/3.5008
  2. Ahmadian, H., Mottershead. J. E., and Friswell M. I., 1998, "Regularization Methods for Finite Element Model Updating," Mechanical Systems and Signal Processing, Vol. 12, No. 1. pp. 47-64. https://doi.org/10.1006/mssp.1996.0133
  3. Friswell, M. I., Penny, J. E. T., and Wilson, D. A. L., 1994, "Using Vibration Data and Statistical Measures to Locate Damage in Structures," Journal of Analytical and Experimental Modal Analysis, Vol. 9, No. 4, pp. 239-254 .
  4. Wei, F. S. and Zhang, D. W., 1989, "Mass Matrix Modification Using Element Correction Method," AIAA Journal, Vol. 27, No.1, pp. 119-121. https://doi.org/10.2514/3.10106
  5. Zhang, Q., Wang, W., Allemang, R. J., and Brown, D. L., 1989, "Prediction of Mass Modification for Desired Natural Frequencies," Journal of Analytical and Experimental Modal Analysis, Vol. 4. No. 2, pp. 39-44.
  6. Adhikari S., 2000, "Calculation of Derivative of Complex Modes using Classical Normal Modes". Cumputer & Structures, Vol. 77 No. 2, pp. 625-633. https://doi.org/10.1016/S0045-7949(00)00016-X
  7. Lee. J. Y., 2002, "A Structural Eigenderivative Analysis by Modification of Design Parameter," Transactions of KSME A, Vol. 26, No. 4, pp. 739-744. https://doi.org/10.3795/KSME-A.2002.26.4.739
  8. Zhang, Q. and Kim, K. K., 1993, "A review of Mass Matrixes for Eigenprobrems," Journal of Computer and Structures, Vol. 46, pp. 1041-1048. https://doi.org/10.1016/0045-7949(93)90090-Z