Journal of the Korean Society of Manufacturing Technology Engineers (한국생산제조학회지)

The Korean Society of Manufacturing Technology Engineers (한국생산제조학회)
권호 표지

Fatigue and Vibration Analysis on Engine Parts

엔진 부품에 대한 피로 및 전동해석

  • 조재웅 (공주대학교 기계자동차공학부) ;
  • 한문식 (계명대학교 기계자동차공학부)
  • Received : 2009.09.25
  • Accepted : 2010.03.24
  • Published : 2010.06.15
Download PDF
⟨ Previous Next ⟩

Abstract

This study analyzes the results with the simulation of heat transfer, structural stress, fatigue and vibration on main parts of engine. The maximum temperature is shown by $300.73^{\circ}C$ on the upper part of piston with the heat transfer. Maximum total deformation or equivalent stress is shown by 65.31mm or 21364MPa respectively at the upper plane of piston with the structural analysis inclusive of heat transfer. The minimum life is shown by the cycle less than $10^7$ at the part of crankshaft with the fatigue analysis. The frequency with the maximum amplitude of deformation is shown by 14Hz. Maximum total deformation or equivalent stress is shown respectively by 93.99mm on the upper plane of piston or 42625MPa at the part connected with crack shaft and connecting rod at 14Hz. The durability of engine design can be verified by using the analysed result of this study.

Keywords

References

  1. Lee, B. Y., Im, M. H., and Shon, J. Y., 2004, "Temperature Distribution and Thermal Stress Analyses of a Large LPLi Engine Piston," Journal of the KOSME, Vol. 28, No. 3, pp. 538-550.
  2. Lee, B. H. and Shin, D. S., 2000, "Piston for CNG Engine, Mechanical and Thermal Stress FE Analysis," 2000 Spring conference Proceeding of the KSAE, No. 1, pp. 170-176.
  3. Kuk, J. Y., 2001, "A Study on the Thermal Stress Analysis of a Piston in a Turbocharged Diesel Engine," Transactions of KSAE, Vol. 9, No. 2, pp. 92-98.
  4. Lee, B. Y., Park, C. W., and Choi, G. H., 2002, "Research on the Inverse Heat Conduction Problem for Thermal Analysis of a Large LPG Engine Piston," Journal of the KSPE, Vol. 19, No. 11, pp. 146-159.
  5. Lee, B. Y. and Choi, G. H., 2004, "Fatigue Life Analysis and Cooling Conditions Evaluation of a Piston for Large LPLi Bus Engines," Journal of the KOSME, Vol. 28, No. 5, pp. 762-772.
  6. Han, S. C., Lee, S. H., and Kim, Y. S., 2002, "A Study on the Flow Characteristics by Thermal and Flow Analysis of S.haust Manifold in Diesel Engine," 2002 sy, osiAnaof the KSAE, pp. 379-384.
  7. Yoo, J. H., Son, J. H., and Kim, E. N., 2005, "Structural Strength Assessment of Monoblock-type Piston for Medium Speed Diesel Engine," Proceedings of the KSME 2005 Fall Annual Meeting, pp. 1306-1311.
  8. Cho, S. H., Ahn, S. T., Kim, Y. H., and Lee, D. S., 1999, "Estimation and Analysis of the Piston Slap Induced Vibration," 1999 Spring conference Proceeding of the KSAE, No. 2, pp. 483-488.
  9. Cho, J. U. and Han, M. S., 2009, "Study on Fatigue Fracture at Disk Brake," Transactions of KSMTE, Vol. 18, No. 2, pp. 201-206.
  10. Swanson, J., 2008, Ansys 11.0, Ansys. Inc, USA.