DOI QR코드

DOI QR Code

Stability Analysis of Reinforced Retaining Wall with Steel Supported Face

강재지주 전면판 보강토 옹벽의 안정성 평가

  • 김기일 (명지대학교 토목환경공학과) ;
  • 김병일 (명지대학교 토목환경공학과) ;
  • 이영생 (경기대학교 토목공학과) ;
  • 이순호 ((주)경호엔지니어링)
  • Received : 2010.11.12
  • Accepted : 2011.01.26
  • Published : 2011.04.30

Abstract

Recently, a new reinforced retaining wall with light steel support face has been developed. In this study, full size in-situ test is carried out to investigate the stability of the new reinforced retaining wall. The lateral displacement of wall, lateral earth pressure, and settlement of the reinforced retaining wall are measured in the full size test. And numerical analysis by 3-D finite element method is also carried out to compare the test results with those of the analysis. From the full size in-situ test, the maximum lateral displacement of wall is 46mm(0.009H) and the maximum settlement is 21.5mm. And comparing these values with those of numerical analysis, it is confirmed that the new reinforced retaining wall with light steel support face is stable and applicable.

최근 콘크리트 블록을 전면판으로 주로 사용하고 있는 기존의 블록식 보강토 옹벽과는 달리 경량의 강재를 지주로 이용하여 전면판의 자중을 감소시켜 안정성을 높이고 시공이 쉬운 보강토 공법이 개발되었다. 이 연구에서는 새로 개발된 보강토 옹벽의 안정성을 확인하기 위해 실제 크기의 현장시험을 수행하여 전면판에 발생하는 수평변위, 수평토압, 그리고 옹벽의 침하량 등을 계측기를 이용하여 측정하였다. 또한, 3차원 수치해석을 수행하여 현장시험결과와 수치해석결과를 비교 분석하였다. 현장계측결과 전면판 최대수평변위는 46mm(0.009H), 최대침하량은 21.5mm로 나타나 FHWA 기준을 만족하는 것으로 나타났다. 또한 현장계측결과를 수치해석결과와 비교 분석한 결과 새로운 보강토 공법은 충분한 안정성을 확보하는 것으로 나타났다.

Keywords

References

  1. 김병일, 이승현, 권오순, 김정환(2009) 지반구조물 설계이론과 실무, 도서출판 새론.
  2. 김진만, 조삼덕, 정한교, 오세용(1997) 지오그리드 보강토 옹벽의 시공중 계측평가, 97년도 토목섬유 학술발표회 논문집, 한국지반공학회, pp. 43-52.
  3. 마이다스아이티, MIDAS/GTS 프로그램 매뉴얼.
  4. 변요셉, 류웅렬, 이동호, 천병식(2010) 절토사면에서 보강토 옹벽의 적용성 연구, 한국지반환경공학회 논문집, 한국지반환경공학회, 제11권 제2호, pp. 53-60.
  5. 유충식, 정혜영, 송아란(2005) 계단식 보강토 옹벽의 거동에 관한 수치 해석적 연구, 한국지반공학회 논문집, 한국지반공학회, 제21권 10호, pp. 49-60.
  6. 조용성, 구호본, 이춘길(2006) 부직포를 활용한 급경사 녹화보강토공법의 적용 가능성에 관한 연구, 대한토목학회논문집, 대한토목학회, 제26권 제4C호, pp. 239-245.
  7. 조현수(2007) 쏘일네일과 강재스트립으로 보강된 복합보강토옹벽 시스템의 안정성평가, 석사학위논문, 한양대학교.
  8. 한국시설안전기술공단(2006) 건설공사 비탈면설계기준, 건설교통부.
  9. Bonaparte, R., Holtz, R. D. and Giroud, J. P. (1987), Soil Reinforcement Design using Geotextiles and Geogrids, Geotextile Testing and the Design Engineer, ASTM STO 952, pp. 69-116.
  10. Broms, B. B. (1978), Design of Fabric Reinforced Retaining Structures, Proc. of the Symposium on Earth Reinforcement, ASCE, Pittsburg, pp. 282-303.
  11. Collin, J. G. (1986), Earth Walls Design, Ph. D. Thesis, Univ. of California at Berkeley.
  12. Elias, V. and Christopher, B. R. (1999), Mechanically Stabilized Earth Walls and Reinforced Soil Slopes Design and Construction Guidelines, Technical Report FHWA-SA-96-071, U.S. DOT FHWA.
  13. Elias, V. Christopher, B. R, and Berg R. R. (2001), Mechanically Stabilized Earth Walls and Reinforced Soil Slopes Design and Construction Guidelines, Publication No. FHWA-NHI-00-043, U.S. DOT FHWA.