Transactions of the Korean Society of Mechanical Engineers A (대한기계학회논문집A)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

Study on Experimental Modeling and Estimation of Roughness of Nanoscale Lapping Surface Based on Laser Scattering Patterns

레이저산란패턴 기반 나노 래핑 표면 거칠기의 실험적 모델링 및 추정에 관한 연구

  • 홍연기 (국립충주대학교 산업대학원) ;
  • 김경범 (국립충주대학교 항공.기계설계학과)
  • Received : 2010.07.12
  • Accepted : 2010.11.22
  • Published : 2011.01.01
Download PDF
⟨ Previous Next ⟩

Abstract

In this study, a correlation between the roughness of nanoscale lapping surface and its laser scattering pattern has been identified experimentally. The characteristics of laser scattering on a reflected surface are investigated, and a laser scattering mechanism is newly designed by adopting the dark-field method. Laser scattering patterns resulting from nanoscale lapping shape are in the shape of crossed irregular lattice. In addition, optimum laser scattering images are obtained by the design of experiment, and the roughness of nanoscale lapping surface is estimated using regression analysis certain useful features of the laser scattering patterns. The results of fifty experiments on three types of nanoscale lapping surfaces show that the roughness of nanoscale lapping surfaces can be accurately estimated by the proposed mathematical modeling method.

본 논문에서는 나노 래핑 표면의 형상과 레이저산란 패턴 사이의 실험적 모델링에 관한 연구를 하였다. 우선, 반사표면에서 나타나는 산란광 속성들을 고찰하여 암시야 기반의 레이저산란 검사 메커니즘을 구성하였다. 이 메커니즘을 이용한 레이저산란 패턴 분석의 경우, 나노 래핑 표면 형상으로부터 산란된 레이저산란 성분은 불규칙하게 사선형태로 교차됨을 알 수 있다. 또한, 실험 계획법을 기반으로 도출된 매개변수로 적용된 최적의 레이저산란 영상에서 나노 래핑 표면 거칠기와 레이저산란 성분 사이의 상관관계를 회귀분석법을 이용하여 수학적 모델링을 시도 하였다. 이 모델의 검증을 위해 나노 래핑 표면 3 종류의 거칠기에 대해 50 번의 반복실험을 수행한 결과, 제시된 수학적 모델은 실제 거칠기 값에 근접하게 추정할 수 있음을 보였다.

Keywords

References

  1. Zahwi, S. and Mekawi, A. M., 2001, "Some Effects of Stylus Force on Scratching Surfaces," International Journal of Machine Tools & Manufacture, 41, pp. 2011-2015. https://doi.org/10.1016/S0890-6955(01)00065-7
  2. Poon, C. Y. and Bhushan, B., 1995, "Comparison of Surface Roughness Measurements by Stylus Profiler, AFM and Non-contact Optical Profiler," WEAR, 190, pp. 76-88. https://doi.org/10.1016/0043-1648(95)06697-7
  3. Kim, G. B., 2009, "A structured mechanism development and experimental parameter selection of laser scattering for the surface inspection of flat-panel glasses," International Journal of Production Research, DOI: 10.108/002075409029922844, (online published).
  4. Park, H. J. and Hwang, Y. M., 2001, "Dimensional Measurement Using the Machine Vision," Journal of Korean Society of Precision Engineering, Vol. 18, No.3, pp. 10-17.
  5. Lim, H. S., Son, S. M., Wong, Y. S. and Rahman, M., 2007, "Development and Evaluation of an On-Machine Optical Measurement Device," Machine Tools and Manufacture, 47, pp. 1556-1562. https://doi.org/10.1016/j.ijmachtools.2006.11.007
  6. Malamas, E. N., Petrakis, E. G. M., Zervakis, M., Petit, L. and Legat, J. D, 2003, "A Survey on Industrial Vision Systems, Applications and Tools," Image and Vision Computing, 21, pp. 171-188. https://doi.org/10.1016/S0262-8856(02)00152-X
  7. Bakolias, C., "Oblique Imaging of Scattered Light for Surface Inspection, 1996," Ph. D. Dissertation, London University.
  8. Ha, T. H., 2007, "A Study on Light Scattering Characteristics of CMP-induced on Silicon Oxide Wafer Surface for Defects Detection and Classification," Ph. D. Dissertation, Osaka university.
  9. Nayar, S. K., Ikeuchi, K. and Kanade, T., 1991, "Surface Reflection: Physical and Geometrical Perspectives," IEEE Pattern Analysis and Machine Intelligence, Vol. 13, Issue 7, pp. 611-634. https://doi.org/10.1109/34.85654
  10. http://www.rubert.co.uk/, Rubert & Co. Ltd.
  11. Han, J. C. and Kim, G. B., 2009, "A Study on the
  12. Hong, Y. K. and Kim, G. B., 2010, "A Study on the Experimental Identification of Surface Roughness Using Laser Scattering Image," Journal of Korean Society Mechanical Engineers(A), Vol. 34, No. 1 pp. 35-41. https://doi.org/10.3795/KSME-A.2010.34.1.35
  13. Roy, R. K., 2001, "Design of Experiments Using the Taguchi Approach," John Wiley & Sons Inc.
  14. Suzuki, R., Nakmae, K. and Fujioka, H., 2005, "Robustness Evaluation of Cost-Optimum Sampling Plan for In-Line Wafer Inspection by Using Taguchi Methods," IEEE, pp. 386-389.
  15. Cheng, S.-W., Wu, C. F.J. and Huwang, L. 2006 , "Statistical Modeling for Experiments with Sliding Levels,” Institute of Mathematical statistics, 52, pp. 245-256.
  16. Freund, R. J., Wilson, W. J. and Sa, P., 2006, "Regression Analysis, 2nd Edition," Academic Press.