An Experimental Study on Microleakage in Light-activated Temporary Filling Materials

광중합형 임시충전재의 미세누출에 관한 실험연구

  • Hwang, Su-Hyun (Department of Dental Hygiene, Choonhae College of Health Sciences) ;
  • Yu, Ji-Su (Department of Dental Hygiene, Gumi College) ;
  • Kim, Sun-Ju (Department of Dental Hygiene, Cheongju University)
  • Received : 2011.04.30
  • Accepted : 2011.08.13
  • Published : 2011.08.31

Abstract

The purpose of this experiment was to examine possibility of microleakage by water, temperature change, and bite force inside the mouth during the period of using light-activated temporary filling materials. 2 kinds of light-activated temporary filling materials were used in order to measure weight and compressive strength and to evaluate microleakage between filling material and cavity wall according to frequency of thermal circulation. First, Light-activated temporary filling material was increased the weight, which was measured according to the period of using. As for the result of comparing between products, the weight of Quicks was indicated to be higher. Second, Compressive strength of Spacer had significant difference depending on period of using. However, significant difference wasn't shown in the compressive strength of Quicks. In Spacer that showed significant difference, the compressive strength increased greatly in the difference of 3 days. Third. As for micro-leakage according to frequency of thermal circulation, the microleakage was indicated to be the highest in the group that carried out 7,000 times. The group with operation of 1,000 times and the group with operation of 3,000 times were indicated the statistically lower micro-leakage than the group with operation of 7,000 times. This study brought about a rise in micro-leakage depending on the passage in the period of using. However, it is obvious fact that micro-leakage increases according to the passage of time after restoration.

본 실험에서는 광중합형 임시충전재의 사용기간(1일 후, 3일 후, 7일 후)동안 구강 내의 수분과 온도변화 및 교합력에 의한 미세누출의 가능성을 알아보기 위하여 무게 및 압축강도를 측정하고 열 순환 횟수에 따라 충전재와 와동면 사이의 미세누출을 평가하고자 2종의 광중합형 임시충전재를 사용하여 실험한 결과는 다음과 같다. 1. 광중합형 임시충전재는 사용기간에 따라 측정한 무게는 증가되었다. 제품 간의 비교결과는 Quicks의 무게가 더 높게 나타났다. 2. Spacer의 압축강도는 사용기간에 따라 유의한 차이가 있으나 Quicks의 압축강도에서는 유의한 차이가 나타나지 않았다. 유의한 차이를 보인 Spacer에서는 3일차에서 압축강도가 크게 증가되었다. 3. 열 순환 횟수에 따른 미세누출은 7,000번 실시한 군에서 미세노출이 가장 높게 나타났고, 1,000번 실시한 군과 3,000번 실시한 군은 7,000번 실시한 군보다 통계학적으로 낮은 미세누출을 나타내었다. 4. 사용기간에 따른 무게와 압축강도 및 미세누출사이의 상호연관성이 나타났다. 본 연구에서는 사용기간 경과에 따라 미세누출의 증가를 가져왔으나 수복 후 시간이 경과함에 따라 미세누출이 증가하는 것은 자명한 사실이므로 향후 광중합형 임시충전재의 미세누출을 평가를 위해서는 습식분석을 통하여 화학적 결합을 유도하는 재료의 조성을 분석하는 방법을 부여하는 것이 미세누출 평가에 적절하다고 사료된다.

Keywords

References

  1. 조낙연, 이인복: 레진계 임시수복재의 중합수축, 수화팽창과 미세누출. 대한치과보존학회 33(2): 115-123, 2008.
  2. 조영곤 등: 금인레이 와동에 대한 임시수복재의 미세누출. 조선대학교 구강생물학연구소 23(1): 73-80, 1999.
  3. http://www.denfoline.co.kr
  4. 이용근 등: 치과용 임시충전재의 경화, 압축 및 열 특성. 대한치과기재학회 29(1): 31-39 2001.
  5. Mayer T, Elckholz P: Microleakage of temporary restorations after thermocycling and mechnical loading. J Endod 23(5): 320-322, 1997. https://doi.org/10.1016/S0099-2399(97)80414-1
  6. Alani AH, Toh CG: Detection of microleakage around dental restorations. Oper Dent 22(4): 173-185, 1997.
  7. Tulunoglu O, Uctasli MB, Ozdemir S: Coronal microleakage of temporary restorations in previously restored teeth with amalgam and composite. Oper Dent 30(3): 331-337, 2005.
  8. 김창윤, 신동훈: 열 순환 횟수에 따른 복합레진의 미세누출. 대한치과보존학회 32(4): 337-384, 2007.
  9. Bobotis HG et al.: A microleakage study of temporary restoration materials used in endodontic. J Endod 15(12): 569-572, 1989. https://doi.org/10.1016/S0099-2399(89)80151-7
  10. Lee YC et al.: Microleakage of endodontic temporary restoration materials. J Endod 19(5): 516-520, 1993.
  11. Qvist V: The effect of mastication on marginal adaptation of composite restorations in vivo. J Dent Res 62: 904-906, 1983. https://doi.org/10.1177/00220345830620081101
  12. Raskin A et al.: Reliability of in vitro microleakage tests: a literature review. J Adhes Dent 3(4): 295-308, 2001.
  13. Parris L, Kapsimalis P: The effect of temperature change on sealing properties of temporary filling materials. Oral Surg 13: 982-989, 1960. https://doi.org/10.1016/0030-4220(60)90045-1
  14. Guzman HJ et al.: Marginal leakage of dental restorations subjected to thermal stress. J Pros Dent 21: 166-175, 1969. https://doi.org/10.1016/0022-3913(69)90089-4
  15. Aguiar FH et al.: A quantitative method of measuring the microleakage of thermocycled or non-thermocycled posterior tooth restorations. Oper Dent 28(6): 793-789, 2003.
  16. Koyutuk AE et al.: Effect of thermal cycling on microleakage of a fissure sealant polymerized with different light sources. Dent Mater 25(4): 713-718, 2006. https://doi.org/10.4012/dmj.25.713